From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, eladr@mellanox.com,
yotamg@mellanox.com, ogerlitz@mellanox.com,
roopa@cumulusnetworks.com, gospo@cumulusnetworks.com
Subject: [patch net-next 08/17] mlxsw: reg: Add QoS Switch Traffic Class Table register
Date: Wed, 6 Apr 2016 17:10:07 +0200 [thread overview]
Message-ID: <1459955416-23786-9-git-send-email-jiri@resnulli.us> (raw)
In-Reply-To: <1459955416-23786-1-git-send-email-jiri@resnulli.us>
From: Ido Schimmel <idosch@mellanox.com>
As part of DCB ops we'll have to configure the priority to traffic class
mapping of a port.
Add the QoS Switch Traffic Class Table (QTCT) register, which configures
the mapping between the packet switch priority and traffic class on the
transmit port.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/reg.h | 55 +++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index bc08f8b..2e58c41 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -1805,6 +1805,59 @@ static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port,
}
}
+/* QTCT - QoS Switch Traffic Class Table
+ * -------------------------------------
+ * Configures the mapping between the packet switch priority and the
+ * traffic class on the transmit port.
+ */
+#define MLXSW_REG_QTCT_ID 0x400A
+#define MLXSW_REG_QTCT_LEN 0x08
+
+static const struct mlxsw_reg_info mlxsw_reg_qtct = {
+ .id = MLXSW_REG_QTCT_ID,
+ .len = MLXSW_REG_QTCT_LEN,
+};
+
+/* reg_qtct_local_port
+ * Local port number.
+ * Access: Index
+ *
+ * Note: CPU port is not supported.
+ */
+MLXSW_ITEM32(reg, qtct, local_port, 0x00, 16, 8);
+
+/* reg_qtct_sub_port
+ * Virtual port within the physical port.
+ * Should be set to 0 when virtual ports are not enabled on the port.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, qtct, sub_port, 0x00, 8, 8);
+
+/* reg_qtct_switch_prio
+ * Switch priority.
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, qtct, switch_prio, 0x00, 0, 4);
+
+/* reg_qtct_tclass
+ * Traffic class.
+ * Default values:
+ * switch_prio 0 : tclass 1
+ * switch_prio 1 : tclass 0
+ * switch_prio i : tclass i, for i > 1
+ * Access: RW
+ */
+MLXSW_ITEM32(reg, qtct, tclass, 0x04, 0, 4);
+
+static inline void mlxsw_reg_qtct_pack(char *payload, u8 local_port,
+ u8 switch_prio, u8 tclass)
+{
+ MLXSW_REG_ZERO(qtct, payload);
+ mlxsw_reg_qtct_local_port_set(payload, local_port);
+ mlxsw_reg_qtct_switch_prio_set(payload, switch_prio);
+ mlxsw_reg_qtct_tclass_set(payload, tclass);
+}
+
/* QEEC - QoS ETS Element Configuration Register
* ---------------------------------------------
* Configures the ETS elements.
@@ -3491,6 +3544,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id)
return "SFMR";
case MLXSW_REG_SPVMLR_ID:
return "SPVMLR";
+ case MLXSW_REG_QTCT_ID:
+ return "QTCT";
case MLXSW_REG_QEEC_ID:
return "QEEC";
case MLXSW_REG_PMLP_ID:
--
2.5.5
next prev parent reply other threads:[~2016-04-06 15:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-06 15:09 [patch net-next 00/17] mlxsw: Introduce support for Data Center Bridging Jiri Pirko
2016-04-06 15:10 ` [patch net-next 01/17] mlxsw: reg: Add Port Prio To Buffer register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 02/17] mlxsw: spectrum: Map all switch priorities to priority group 0 Jiri Pirko
2016-04-06 15:10 ` [patch net-next 03/17] mlxsw: spectrum: Add bytes to cells helper Jiri Pirko
2016-04-06 15:10 ` [patch net-next 04/17] mlxsw: spectrum: Correctly configure headroom size Jiri Pirko
2016-04-06 15:10 ` [patch net-next 05/17] mlxsw: reg: Use correct PBMC register length Jiri Pirko
2016-04-06 15:10 ` [patch net-next 06/17] mlxsw: spectrum: Set port's shared buffer size to 0 Jiri Pirko
2016-04-06 15:10 ` [patch net-next 07/17] mlxsw: reg: Add QoS ETS Element Configuration register Jiri Pirko
2016-04-06 15:10 ` Jiri Pirko [this message]
2016-04-06 15:10 ` [patch net-next 09/17] mlxsw: spectrum: Initialize egress scheduling Jiri Pirko
2016-04-06 15:10 ` [patch net-next 10/17] mlxsw: spectrum: Introduce support for Data Center Bridging (DCB) Jiri Pirko
2016-04-06 15:10 ` [patch net-next 11/17] mlxsw: spectrum: Add IEEE 802.1Qaz ETS support Jiri Pirko
2016-04-06 15:10 ` [patch net-next 12/17] mlxsw: spectrum: Allow setting maximum rate for a TC Jiri Pirko
2016-04-06 15:10 ` [patch net-next 13/17] mlxsw: reg: Add Port Flow Control Configuration register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 14/17] mlxsw: reg: Add lossless settings for PBMC register Jiri Pirko
2016-04-06 15:10 ` [patch net-next 15/17] mlxsw: spectrum: Add support for PAUSE frames Jiri Pirko
2016-04-06 15:10 ` [patch net-next 16/17] mlxsw: reg: Introduce per priority counters Jiri Pirko
2016-04-06 15:10 ` [patch net-next 17/17] mlxsw: spectrum: Add IEEE 802.1Qbb PFC support Jiri Pirko
2016-04-06 21:24 ` [patch net-next 00/17] mlxsw: Introduce support for Data Center Bridging David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459955416-23786-9-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=davem@davemloft.net \
--cc=eladr@mellanox.com \
--cc=gospo@cumulusnetworks.com \
--cc=idosch@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=ogerlitz@mellanox.com \
--cc=roopa@cumulusnetworks.com \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).