From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Shannon Nelson <shannon.nelson@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 11/14] i40e: Move NVM event wait check to NVM code
Date: Wed, 6 Apr 2016 20:29:36 -0700 [thread overview]
Message-ID: <1459999779-22254-12-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1459999779-22254-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Shannon Nelson <shannon.nelson@intel.com>
The logic that checks AQ events for NVM done events is better kept
in nvm.c with the rest of the nvmupdate handling code.
Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_adminq.c | 31 +-----------------------
drivers/net/ethernet/intel/i40e/i40e_nvm.c | 31 ++++++++++++++++++++++++
drivers/net/ethernet/intel/i40e/i40e_prototype.h | 1 +
3 files changed, 33 insertions(+), 30 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index e8278e1..43bb413 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -33,16 +33,6 @@
static void i40e_resume_aq(struct i40e_hw *hw);
/**
- * i40e_is_nvm_update_op - return true if this is an NVM update operation
- * @desc: API request descriptor
- **/
-static inline bool i40e_is_nvm_update_op(struct i40e_aq_desc *desc)
-{
- return (desc->opcode == cpu_to_le16(i40e_aqc_opc_nvm_erase)) ||
- (desc->opcode == cpu_to_le16(i40e_aqc_opc_nvm_update));
-}
-
-/**
* i40e_adminq_init_regs - Initialize AdminQ registers
* @hw: pointer to the hardware structure
*
@@ -1023,26 +1013,7 @@ i40e_status i40e_clean_arq_element(struct i40e_hw *hw,
hw->aq.arq.next_to_clean = ntc;
hw->aq.arq.next_to_use = ntu;
- if (i40e_is_nvm_update_op(&e->desc)) {
- if (hw->nvm_release_on_done) {
- i40e_release_nvm(hw);
- hw->nvm_release_on_done = false;
- }
-
- switch (hw->nvmupd_state) {
- case I40E_NVMUPD_STATE_INIT_WAIT:
- hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
- break;
-
- case I40E_NVMUPD_STATE_WRITE_WAIT:
- hw->nvmupd_state = I40E_NVMUPD_STATE_WRITING;
- break;
-
- default:
- break;
- }
- }
-
+ i40e_nvmupd_check_wait_event(hw, le16_to_cpu(e->desc.opcode));
clean_arq_element_out:
/* Set pending if needed, unlock and return */
if (pending)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 1ae29ac..f2cea3d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -1030,6 +1030,37 @@ retry:
}
/**
+ * i40e_nvmupd_check_wait_event - handle NVM update operation events
+ * @hw: pointer to the hardware structure
+ * @opcode: the event that just happened
+ **/
+void i40e_nvmupd_check_wait_event(struct i40e_hw *hw, u16 opcode)
+{
+ if (opcode == i40e_aqc_opc_nvm_erase ||
+ opcode == i40e_aqc_opc_nvm_update) {
+ i40e_debug(hw, I40E_DEBUG_NVM,
+ "NVMUPD: clearing wait on opcode 0x%04x\n", opcode);
+ if (hw->nvm_release_on_done) {
+ i40e_release_nvm(hw);
+ hw->nvm_release_on_done = false;
+ }
+
+ switch (hw->nvmupd_state) {
+ case I40E_NVMUPD_STATE_INIT_WAIT:
+ hw->nvmupd_state = I40E_NVMUPD_STATE_INIT;
+ break;
+
+ case I40E_NVMUPD_STATE_WRITE_WAIT:
+ hw->nvmupd_state = I40E_NVMUPD_STATE_WRITING;
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
+/**
* i40e_nvmupd_validate_command - Validate given command
* @hw: pointer to hardware structure
* @cmd: pointer to nvm update command buffer
diff --git a/drivers/net/ethernet/intel/i40e/i40e_prototype.h b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
index d51eee5..134035f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_prototype.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_prototype.h
@@ -308,6 +308,7 @@ i40e_status i40e_validate_nvm_checksum(struct i40e_hw *hw,
i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
struct i40e_nvm_access *cmd,
u8 *bytes, int *);
+void i40e_nvmupd_check_wait_event(struct i40e_hw *hw, u16 opcode);
void i40e_set_pci_config_data(struct i40e_hw *hw, u16 link_status);
extern struct i40e_rx_ptype_decoded i40e_ptype_lookup[];
--
2.5.5
next prev parent reply other threads:[~2016-04-07 3:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-07 3:29 [net-next 00/14][pull request] 40GbE Intel Wired LAN Driver Updates 2016-04-06 Jeff Kirsher
2016-04-07 3:29 ` [net-next 01/14] i40e: Inserting a HW capability display info Jeff Kirsher
2016-04-07 3:29 ` [net-next 02/14] i40e: Leave debug_mask cleared at init Jeff Kirsher
2016-04-07 3:29 ` [net-next 03/14] i40e: Move HW flush Jeff Kirsher
2016-04-07 3:29 ` [net-next 04/14] i40e/i40evf: Move stack var deeper Jeff Kirsher
2016-04-07 3:29 ` [net-next 05/14] i40e/i40evf: Drop unused tx_ring argument Jeff Kirsher
2016-04-07 3:29 ` [net-next 06/14] i40e/i40evf: Faster RX via avoiding FCoE Jeff Kirsher
2016-04-07 3:29 ` [net-next 07/14] i40e: Patch to support trusted VF Jeff Kirsher
2016-04-07 3:29 ` [net-next 08/14] i40e: Restrict VF poll mode to only single function mode devices Jeff Kirsher
2016-04-07 3:29 ` [net-next 09/14] i40e: Move NVM variable out of AQ struct Jeff Kirsher
2016-04-07 3:29 ` [net-next 10/14] i40e: Add RSS configuration to virtual channel Jeff Kirsher
2016-04-07 3:29 ` Jeff Kirsher [this message]
2016-04-07 3:29 ` [net-next 12/14] i40e: Input set mask constants for RSS, flow director, and flex bytes Jeff Kirsher
2016-04-07 3:29 ` [net-next 13/14] i40e/i40evf: Bump patch from 1.5.2 to 1.5.5 Jeff Kirsher
2016-04-07 3:29 ` [net-next 14/14] i40evf: properly handle VLAN features Jeff Kirsher
2016-04-07 4:11 ` [net-next 00/14][pull request] 40GbE Intel Wired LAN Driver Updates 2016-04-06 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459999779-22254-12-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
--cc=shannon.nelson@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).