From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
netdev <netdev@vger.kernel.org>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH net-next 5/7] net: dsa: Rename DSA probe function.
Date: Mon, 11 Apr 2016 21:50:07 +0200 [thread overview]
Message-ID: <1460404209-32083-6-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1460404209-32083-1-git-send-email-andrew@lunn.ch>
Rename the function called from the DSA to perform a probe for the
switch. This makes the normal _probe() name available for a standard
Linux device driver probe function.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/bcm_sf2.c | 7 ++++---
drivers/net/dsa/mv88e6060.c | 7 ++++---
drivers/net/dsa/mv88e6123.c | 7 ++++---
drivers/net/dsa/mv88e6131.c | 7 ++++---
drivers/net/dsa/mv88e6171.c | 7 ++++---
drivers/net/dsa/mv88e6352.c | 7 ++++---
6 files changed, 24 insertions(+), 18 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 7d62802a66d5..50caa525cda3 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -135,8 +135,9 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
return BCM_SF2_STATS_SIZE;
}
-static char *bcm_sf2_sw_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **_priv)
+static char *bcm_sf2_sw_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **_priv)
{
struct bcm_sf2_priv *priv;
@@ -1370,7 +1371,7 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
static struct dsa_switch_driver bcm_sf2_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_BRCM,
- .probe = bcm_sf2_sw_probe,
+ .probe = bcm_sf2_sw_drv_probe,
.setup = bcm_sf2_sw_setup,
.set_addr = bcm_sf2_sw_set_addr,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index 46fe5dc65a99..adb608ccd9aa 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -69,8 +69,9 @@ static char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
return NULL;
}
-static char *mv88e6060_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **_priv)
+static char *mv88e6060_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **_priv)
{
struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
struct mv88e6060_priv *priv;
@@ -248,7 +249,7 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
static struct dsa_switch_driver mv88e6060_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_TRAILER,
- .probe = mv88e6060_probe,
+ .probe = mv88e6060_drv_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
.phy_read = mv88e6060_phy_read,
diff --git a/drivers/net/dsa/mv88e6123.c b/drivers/net/dsa/mv88e6123.c
index 8aaac0894752..c34283d929c4 100644
--- a/drivers/net/dsa/mv88e6123.c
+++ b/drivers/net/dsa/mv88e6123.c
@@ -29,8 +29,9 @@ static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
{ PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
};
-static char *mv88e6123_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **priv)
+static char *mv88e6123_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **priv)
{
return mv88e6xxx_drv_probe(dsa_dev, host_dev, sw_addr, priv,
mv88e6123_table,
@@ -106,7 +107,7 @@ static int mv88e6123_setup(struct dsa_switch *ds)
struct dsa_switch_driver mv88e6123_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6123_probe,
+ .probe = mv88e6123_drv_probe,
.setup = mv88e6123_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read,
diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
index 9e6edf94a855..f5d75fce1e96 100644
--- a/drivers/net/dsa/mv88e6131.c
+++ b/drivers/net/dsa/mv88e6131.c
@@ -25,8 +25,9 @@ static const struct mv88e6xxx_switch_id mv88e6131_table[] = {
{ PORT_SWITCH_ID_6185, "Marvell 88E6185" },
};
-static char *mv88e6131_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **priv)
+static char *mv88e6131_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **priv)
{
return mv88e6xxx_drv_probe(dsa_dev, host_dev, sw_addr, priv,
mv88e6131_table,
@@ -163,7 +164,7 @@ mv88e6131_phy_write(struct dsa_switch *ds,
struct dsa_switch_driver mv88e6131_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_DSA,
- .probe = mv88e6131_probe,
+ .probe = mv88e6131_drv_probe,
.setup = mv88e6131_setup,
.set_addr = mv88e6xxx_set_addr_direct,
.phy_read = mv88e6131_phy_read,
diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 6ab86071391f..f5622506cdfa 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -24,8 +24,9 @@ static const struct mv88e6xxx_switch_id mv88e6171_table[] = {
{ PORT_SWITCH_ID_6351, "Marvell 88E6351" },
};
-static char *mv88e6171_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **priv)
+static char *mv88e6171_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **priv)
{
return mv88e6xxx_drv_probe(dsa_dev, host_dev, sw_addr, priv,
mv88e6171_table,
@@ -92,7 +93,7 @@ static int mv88e6171_setup(struct dsa_switch *ds)
struct dsa_switch_driver mv88e6171_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6171_probe,
+ .probe = mv88e6171_drv_probe,
.setup = mv88e6171_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read_indirect,
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c
index 764b10ffb631..e54ee27db129 100644
--- a/drivers/net/dsa/mv88e6352.c
+++ b/drivers/net/dsa/mv88e6352.c
@@ -37,8 +37,9 @@ static const struct mv88e6xxx_switch_id mv88e6352_table[] = {
{ PORT_SWITCH_ID_6352_A1, "Marvell 88E6352 (A1)" },
};
-static char *mv88e6352_probe(struct device *dsa_dev, struct device *host_dev,
- int sw_addr, void **priv)
+static char *mv88e6352_drv_probe(struct device *dsa_dev,
+ struct device *host_dev,
+ int sw_addr, void **priv)
{
return mv88e6xxx_drv_probe(dsa_dev, host_dev, sw_addr, priv,
mv88e6352_table,
@@ -306,7 +307,7 @@ static int mv88e6352_set_eeprom(struct dsa_switch *ds,
struct dsa_switch_driver mv88e6352_switch_driver = {
.tag_protocol = DSA_TAG_PROTO_EDSA,
- .probe = mv88e6352_probe,
+ .probe = mv88e6352_drv_probe,
.setup = mv88e6352_setup,
.set_addr = mv88e6xxx_set_addr_indirect,
.phy_read = mv88e6xxx_phy_read_indirect,
--
2.7.0
next prev parent reply other threads:[~2016-04-11 19:52 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-11 19:50 [PATCH net-next 0/7] DSA refactoring: set 1 Andrew Lunn
2016-04-11 19:50 ` [PATCH net-next 1/7] net: dsa: Pass the dsa device to the switch drivers Andrew Lunn
2016-04-11 19:50 ` [PATCH net-next 2/7] net: dsa: Have the switch driver allocate there own private memory Andrew Lunn
2016-04-11 19:50 ` [PATCH net-next 3/7] net: dsa: Remove allocation of driver " Andrew Lunn
2016-04-11 19:50 ` [PATCH net-next 4/7] net: dsa: Keep the mii bus and address in the private structure Andrew Lunn
2016-04-11 19:50 ` Andrew Lunn [this message]
2016-04-11 19:50 ` [PATCH net-next 6/7] dsa: Rename phys_port_mask to user_port_mask Andrew Lunn
2016-04-11 20:03 ` Florian Fainelli
2016-04-11 20:31 ` Andrew Lunn
2016-04-11 19:50 ` [PATCH net-next 7/7] dsa: mv88e6xxx: Use bus in mv88e6xxx_lookup_name() Andrew Lunn
2016-04-12 3:15 ` Vivien Didelot
2016-04-12 3:16 ` [PATCH net-next 0/7] DSA refactoring: set 1 Vivien Didelot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1460404209-32083-6-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).