[PATCH 4.6 fix] bgmac: fix MAC soft-reset bit for corerev > 4

["Rafał Miłecki" <zajec5@gmail.com>]

From: Felix Fietkau <nbd@openwrt.org>

Only core revisions older than 4 use BGMAC_CMDCFG_SR_REV0. This mainly
fixes support for BCM4708A0KF SoCs with Ethernet core rev 5 (it means
only some devices as most of BCM4708A0KF-s got core rev 4).
This was tested for regressions on BCM47094 which doesn't seem to care
which bit gets used.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
If it's OK for everyone, I suggest taking this patch into net.git repo.
It obviously can't regress old devices and was well tested on new ones
by OpenWrt users.
---
 drivers/net/ethernet/broadcom/bgmac.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bgmac.h b/drivers/net/ethernet/broadcom/bgmac.h
index 4fbb093..9a03c14 100644
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -199,9 +199,9 @@
 #define  BGMAC_CMDCFG_TAI			0x00000200
 #define  BGMAC_CMDCFG_HD			0x00000400	/* Set if in half duplex mode */
 #define  BGMAC_CMDCFG_HD_SHIFT			10
-#define  BGMAC_CMDCFG_SR_REV0			0x00000800	/* Set to reset mode, for other revs */
-#define  BGMAC_CMDCFG_SR_REV4			0x00002000	/* Set to reset mode, only for core rev 4 */
-#define  BGMAC_CMDCFG_SR(rev)  ((rev == 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
+#define  BGMAC_CMDCFG_SR_REV0			0x00000800	/* Set to reset mode, for core rev 0-3 */
+#define  BGMAC_CMDCFG_SR_REV4			0x00002000	/* Set to reset mode, for core rev >= 4 */
+#define  BGMAC_CMDCFG_SR(rev)  ((rev >= 4) ? BGMAC_CMDCFG_SR_REV4 : BGMAC_CMDCFG_SR_REV0)
 #define  BGMAC_CMDCFG_ML			0x00008000	/* Set to activate mac loopback mode */
 #define  BGMAC_CMDCFG_AE			0x00400000
 #define  BGMAC_CMDCFG_CFE			0x00800000
-- 
1.8.4.5