netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Aring <aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: linux-wpan-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
	marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org,
	jukka.rissanen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	hannes-tFNcAqjVMyqKXQKiL6tip0B+6BGkLq7r@public.gmane.org,
	stefan-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org,
	mcr-SWp7JaYWvAQV+D8aMU/kSg@public.gmane.org,
	werner-SEdMjqphH88wryQfseakQg@public.gmane.org,
	linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Alexander Aring <aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	"David S . Miller"
	<davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Subject: [PATCH bluetooth-next 01/10] 6lowpan: add private neighbour data
Date: Mon, 18 Apr 2016 12:58:19 +0200	[thread overview]
Message-ID: <1460977108-4675-2-git-send-email-aar@pengutronix.de> (raw)
In-Reply-To: <1460977108-4675-1-git-send-email-aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>

This patch will introduce a 6lowpan neighbour private data. Like the
interface private data we handle private data for generic 6lowpan and
for link-layer specific 6lowpan.

The current first use case if to save the short address for a 802.15.4
6lowpan neighbour.

Cc: David S. Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
Signed-off-by: Alexander Aring <aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 include/linux/netdevice.h     |  3 +--
 include/net/6lowpan.h         | 24 ++++++++++++++++++++++++
 net/bluetooth/6lowpan.c       |  2 ++
 net/ieee802154/6lowpan/core.c | 12 ++++++++++++
 4 files changed, 39 insertions(+), 2 deletions(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 166402a..0052c42 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1487,8 +1487,7 @@ enum netdev_priv_flags {
  * 	@perm_addr:		Permanent hw address
  * 	@addr_assign_type:	Hw address assignment type
  * 	@addr_len:		Hardware address length
- * 	@neigh_priv_len;	Used in neigh_alloc(),
- * 				initialized only in atm/clip.c
+ *	@neigh_priv_len;	Used in neigh_alloc()
  * 	@dev_id:		Used to differentiate devices that share
  * 				the same link layer address
  * 	@dev_port:		Used to differentiate devices that share
diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
index da84cf9..61c6517 100644
--- a/include/net/6lowpan.h
+++ b/include/net/6lowpan.h
@@ -98,6 +98,9 @@ static inline bool lowpan_is_iphc(u8 dispatch)
 #define LOWPAN_PRIV_SIZE(llpriv_size)	\
 	(sizeof(struct lowpan_dev) + llpriv_size)
 
+#define LOWPAN_NEIGH_PRIV_SIZE(llneigh_priv_size)	\
+	(sizeof(struct lowpan_neigh) + llneigh_priv_size)
+
 enum lowpan_lltypes {
 	LOWPAN_LLTYPE_BTLE,
 	LOWPAN_LLTYPE_IEEE802154,
@@ -141,6 +144,27 @@ struct lowpan_dev {
 	u8 priv[0] __aligned(sizeof(void *));
 };
 
+struct lowpan_neigh {
+	/* 6LoWPAN neigh private data */
+	/* must be last */
+	u8 priv[0] __aligned(sizeof(void *));
+};
+
+struct lowpan_802154_neigh {
+	__le16 short_addr;
+};
+
+static inline struct lowpan_neigh *lowpan_neigh(void *neigh_priv)
+{
+	return neigh_priv;
+}
+
+static inline
+struct lowpan_802154_neigh *lowpan_802154_neigh(void *neigh_priv)
+{
+	return (struct lowpan_802154_neigh *)lowpan_neigh(neigh_priv)->priv;
+}
+
 static inline
 struct lowpan_dev *lowpan_dev(const struct net_device *dev)
 {
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 38e82dd..b7c4efa 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -833,6 +833,8 @@ static int setup_netdev(struct l2cap_chan *chan, struct lowpan_btle_dev **dev)
 	list_add_rcu(&(*dev)->list, &bt_6lowpan_devices);
 	spin_unlock(&devices_lock);
 
+	netdev->neigh_priv_len = LOWPAN_NEIGH_PRIV_SIZE(0);
+
 	err = lowpan_register_netdev(netdev, LOWPAN_LLTYPE_BTLE);
 	if (err < 0) {
 		BT_INFO("register_netdev failed %d", err);
diff --git a/net/ieee802154/6lowpan/core.c b/net/ieee802154/6lowpan/core.c
index dd085db..3162632 100644
--- a/net/ieee802154/6lowpan/core.c
+++ b/net/ieee802154/6lowpan/core.c
@@ -92,11 +92,21 @@ static int lowpan_stop(struct net_device *dev)
 	return 0;
 }
 
+static int lowpan_neigh_construct(struct neighbour *n)
+{
+	struct lowpan_802154_neigh *neigh = lowpan_802154_neigh(neighbour_priv(n));
+
+	/* default no short_addr is available for a neighbour */
+	neigh->short_addr = cpu_to_le16(IEEE802154_ADDR_SHORT_UNSPEC);
+	return 0;
+}
+
 static const struct net_device_ops lowpan_netdev_ops = {
 	.ndo_init		= lowpan_dev_init,
 	.ndo_start_xmit		= lowpan_xmit,
 	.ndo_open		= lowpan_open,
 	.ndo_stop		= lowpan_stop,
+	.ndo_neigh_construct    = lowpan_neigh_construct,
 };
 
 static void lowpan_setup(struct net_device *ldev)
@@ -161,6 +171,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *ldev,
 				wdev->needed_headroom;
 	ldev->needed_tailroom = wdev->needed_tailroom;
 
+	ldev->neigh_priv_len = LOWPAN_NEIGH_PRIV_SIZE(sizeof(struct lowpan_802154_neigh));
+
 	ret = lowpan_register_netdevice(ldev, LOWPAN_LLTYPE_IEEE802154);
 	if (ret < 0) {
 		dev_put(wdev);
-- 
2.8.0

  parent reply	other threads:[~2016-04-18 10:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-18 10:58 [PATCH bluetooth-next 00/10] 6lowpan: introduce basic 6lowpan-nd Alexander Aring
     [not found] ` <1460977108-4675-1-git-send-email-aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-04-18 10:58   ` Alexander Aring [this message]
2016-04-18 10:58   ` [PATCH bluetooth-next 02/10] 6lowpan: add 802.15.4 short addr slaac Alexander Aring
2016-04-18 10:58   ` [PATCH bluetooth-next 03/10] 6lowpan: remove ipv6 module request Alexander Aring
2016-04-18 10:58   ` [PATCH bluetooth-next 04/10] ndisc: add addr_len parameter to ndisc_opt_addr_space Alexander Aring
2016-04-18 10:58   ` [PATCH bluetooth-next 05/10] ndisc: add addr_len parameter to ndisc_opt_addr_data Alexander Aring
2016-04-18 10:58   ` [PATCH bluetooth-next 07/10] ipv6: introduce neighbour discovery ops Alexander Aring
2016-04-18 12:59     ` kbuild test robot
2016-04-18 13:28     ` Alexander Aring
2016-04-18 14:23     ` kbuild test robot
2016-04-18 10:58 ` [PATCH bluetooth-next 06/10] ndisc: add addr_len parameter to ndisc_fill_addr_option Alexander Aring
2016-04-18 10:58 ` [PATCH bluetooth-next 08/10] ipv6: export ndisc functions Alexander Aring
2016-04-18 10:58 ` [PATCH bluetooth-next 09/10] 6lowpan: introduce 6lowpan-nd Alexander Aring
     [not found]   ` <1460977108-4675-10-git-send-email-aar-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2016-04-18 13:04     ` kbuild test robot
2016-04-18 15:04   ` kbuild test robot
2016-04-18 10:58 ` [PATCH bluetooth-next 10/10] 6lowpan: add support for 802.15.4 short addr handling Alexander Aring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1460977108-4675-2-git-send-email-aar@pengutronix.de \
    --to=aar-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=hannes-tFNcAqjVMyqKXQKiL6tip0B+6BGkLq7r@public.gmane.org \
    --cc=jukka.rissanen-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    --cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=linux-bluetooth-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-wpan-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=marcel-kz+m5ild9QBg9hUCZPvPmw@public.gmane.org \
    --cc=mcr-SWp7JaYWvAQV+D8aMU/kSg@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=stefan-JPH+aEBZ4P+UEJcrhfAQsw@public.gmane.org \
    --cc=werner-SEdMjqphH88wryQfseakQg@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).