From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Eugene Krasnikov <k.eugene.e@gmail.com>,
Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
John Stultz <john.stultz@linaro.org>
Subject: [PATCH] wcn36xx: Set SMD timeout to 10 seconds
Date: Thu, 21 Apr 2016 14:09:42 -0700 [thread overview]
Message-ID: <1461272982-7233-1-git-send-email-bjorn.andersson@linaro.org> (raw)
After booting the wireless subsystem and uploading the NV blob to the
WCNSS_CTRL service the remote continues to do things and will not start
servicing wlan-requests for another 2-5 seconds (measured).
The downstream code does not have any special handling for this case,
but has a timeout of 10 seconds for the communication layer. By
extending the wcn36xx timeout to match this we follows the same flow for
the boot procedure and can successfully configure WiFi as wlan0 is
registered.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/net/wireless/ath/wcn36xx/smd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index e6aadd273c46..6310560901f0 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -24,7 +24,7 @@
#define WCN36XX_HAL_BUF_SIZE 4096
-#define HAL_MSG_TIMEOUT 500
+#define HAL_MSG_TIMEOUT 10000
#define WCN36XX_SMSM_WLAN_TX_ENABLE 0x00000400
#define WCN36XX_SMSM_WLAN_TX_RINGS_EMPTY 0x00000200
/* The PNO version info be contained in the rsp msg */
--
2.5.0
next reply other threads:[~2016-04-21 21:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-21 21:09 Bjorn Andersson [this message]
2016-04-21 21:11 ` [PATCH] wcn36xx: Set SMD timeout to 10 seconds John Stultz
2016-04-27 12:55 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461272982-7233-1-git-send-email-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=john.stultz@linaro.org \
--cc=k.eugene.e@gmail.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox