[net-next v2 01/14] i40e/i40evf: Clean up feature flags

[Jeff Kirsher <jeffrey.t.kirsher@intel.com>]

From: Alexander Duyck <aduyck@mirantis.com>

The feature flags list for i40e and i40evf is beginning to become pretty
massive.  I plan to add another 4 or so features to these drivers and
duplicating the flags for each and every flags list is becoming a bit
repetitive.

The primary change here is that we now build our features list around
hw_encap_features.  After that we assign that to vlan_features,
hw_features, and finally map that onto features.  In addition we end up
throwing features onto hw_encap_features that end up having no effect such
as the Rx offloads and SCTP_CRC.  However that should have no impact and
makes things a bit easier for us as hw_encap_features is one of the less
updated features maps available.

For i40evf I went through and sanity checked a few features as well.
Specifically RXCSUM was being set as a read-only feature which didn't make
much sense.  I have updated things so we can clear the NETIF_F_RXCSUM flag
since that is really a software feature and not a hardware one anyway so
disabling it is just a matter of ignoring the result from the hardware.

Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 61 ++++++++++-------------
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 66 ++++++++++++-------------
 2 files changed, 58 insertions(+), 69 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0b071ce..f2e83fe 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9111,40 +9111,36 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 	np = netdev_priv(netdev);
 	np->vsi = vsi;
 
-	netdev->hw_enc_features |= NETIF_F_IP_CSUM	       |
-				   NETIF_F_IPV6_CSUM	       |
-				   NETIF_F_TSO		       |
-				   NETIF_F_TSO6		       |
-				   NETIF_F_TSO_ECN	       |
-				   NETIF_F_GSO_GRE	       |
-				   NETIF_F_GSO_UDP_TUNNEL      |
-				   NETIF_F_GSO_UDP_TUNNEL_CSUM |
+	netdev->hw_enc_features |= NETIF_F_SG			|
+				   NETIF_F_IP_CSUM		|
+				   NETIF_F_IPV6_CSUM		|
+				   NETIF_F_HIGHDMA		|
+				   NETIF_F_SOFT_FEATURES	|
+				   NETIF_F_TSO			|
+				   NETIF_F_TSO_ECN		|
+				   NETIF_F_TSO6			|
+				   NETIF_F_GSO_GRE		|
+				   NETIF_F_GSO_UDP_TUNNEL	|
+				   NETIF_F_GSO_UDP_TUNNEL_CSUM	|
+				   NETIF_F_SCTP_CRC		|
+				   NETIF_F_RXHASH		|
+				   NETIF_F_RXCSUM		|
 				   0;
 
-	netdev->features = NETIF_F_SG		       |
-			   NETIF_F_IP_CSUM	       |
-			   NETIF_F_SCTP_CRC	       |
-			   NETIF_F_HIGHDMA	       |
-			   NETIF_F_GSO_UDP_TUNNEL      |
-			   NETIF_F_GSO_GRE	       |
-			   NETIF_F_HW_VLAN_CTAG_TX     |
-			   NETIF_F_HW_VLAN_CTAG_RX     |
-			   NETIF_F_HW_VLAN_CTAG_FILTER |
-			   NETIF_F_IPV6_CSUM	       |
-			   NETIF_F_TSO		       |
-			   NETIF_F_TSO_ECN	       |
-			   NETIF_F_TSO6		       |
-			   NETIF_F_RXCSUM	       |
-			   NETIF_F_RXHASH	       |
-			   0;
+	if (!(pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE))
+		netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+	/* record features VLANs can make use of */
+	netdev->vlan_features |= netdev->hw_enc_features;
 
 	if (!(pf->flags & I40E_FLAG_MFP_ENABLED))
-		netdev->features |= NETIF_F_NTUPLE;
-	if (pf->flags & I40E_FLAG_OUTER_UDP_CSUM_CAPABLE)
-		netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+		netdev->hw_features |= NETIF_F_NTUPLE;
+
+	netdev->hw_features |= netdev->hw_enc_features	|
+			       NETIF_F_HW_VLAN_CTAG_TX	|
+			       NETIF_F_HW_VLAN_CTAG_RX;
 
-	/* copy netdev features into list of user selectable features */
-	netdev->hw_features |= netdev->features;
+	netdev->features |= netdev->hw_features | NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	if (vsi->type == I40E_VSI_MAIN) {
 		SET_NETDEV_DEV(netdev, &pf->pdev->dev);
@@ -9183,12 +9179,7 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 
 	ether_addr_copy(netdev->dev_addr, mac_addr);
 	ether_addr_copy(netdev->perm_addr, mac_addr);
-	/* vlan gets same features (except vlan offload)
-	 * after any tweaks for specific VSI types
-	 */
-	netdev->vlan_features = netdev->features & ~(NETIF_F_HW_VLAN_CTAG_TX |
-						     NETIF_F_HW_VLAN_CTAG_RX |
-						   NETIF_F_HW_VLAN_CTAG_FILTER);
+
 	netdev->priv_flags |= IFF_UNICAST_FLT;
 	netdev->priv_flags |= IFF_SUPP_NOFCS;
 	/* Setup netdev TC information */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 9110319..e3857d8 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2337,40 +2337,38 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
 		return -ENODEV;
 	}
 
-	netdev->features |= NETIF_F_HIGHDMA |
-			    NETIF_F_SG |
-			    NETIF_F_IP_CSUM |
-			    NETIF_F_SCTP_CRC |
-			    NETIF_F_IPV6_CSUM |
-			    NETIF_F_TSO |
-			    NETIF_F_TSO6 |
-			    NETIF_F_TSO_ECN |
-			    NETIF_F_GSO_GRE |
-			    NETIF_F_GSO_UDP_TUNNEL |
-			    NETIF_F_RXCSUM |
-			    NETIF_F_GRO;
-
-	netdev->hw_enc_features |= NETIF_F_IP_CSUM	       |
-				   NETIF_F_IPV6_CSUM	       |
-				   NETIF_F_TSO		       |
-				   NETIF_F_TSO6		       |
-				   NETIF_F_TSO_ECN	       |
-				   NETIF_F_GSO_GRE	       |
-				   NETIF_F_GSO_UDP_TUNNEL      |
-				   NETIF_F_GSO_UDP_TUNNEL_CSUM;
-
-	if (adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE)
-		netdev->features |= NETIF_F_GSO_UDP_TUNNEL_CSUM;
-
-	/* always clear VLAN features because they can change at every reset */
-	netdev->features &= ~(I40EVF_VLAN_FEATURES);
-	/* copy netdev features into list of user selectable features */
-	netdev->hw_features |= netdev->features;
-
-	if (vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN) {
-		netdev->vlan_features = netdev->features;
-		netdev->features |= I40EVF_VLAN_FEATURES;
-	}
+	netdev->hw_enc_features |= NETIF_F_SG			|
+				   NETIF_F_IP_CSUM		|
+				   NETIF_F_IPV6_CSUM		|
+				   NETIF_F_HIGHDMA		|
+				   NETIF_F_SOFT_FEATURES	|
+				   NETIF_F_TSO			|
+				   NETIF_F_TSO_ECN		|
+				   NETIF_F_TSO6			|
+				   NETIF_F_GSO_GRE		|
+				   NETIF_F_GSO_UDP_TUNNEL	|
+				   NETIF_F_GSO_UDP_TUNNEL_CSUM	|
+				   NETIF_F_SCTP_CRC		|
+				   NETIF_F_RXHASH		|
+				   NETIF_F_RXCSUM		|
+				   0;
+
+	if (!(adapter->flags & I40EVF_FLAG_OUTER_UDP_CSUM_CAPABLE))
+		netdev->hw_enc_features ^= NETIF_F_GSO_UDP_TUNNEL_CSUM;
+
+	/* record features VLANs can make use of */
+	netdev->vlan_features |= netdev->hw_enc_features;
+
+	/* Write features and hw_features separately to avoid polluting
+	 * with, or dropping, features that are set when we registgered.
+	 */
+	netdev->hw_features |= netdev->hw_enc_features;
+
+	netdev->features |= netdev->hw_enc_features | I40EVF_VLAN_FEATURES;
+
+	/* disable VLAN features if not supported */
+	if (!(vfres->vf_offload_flags & I40E_VIRTCHNL_VF_OFFLOAD_VLAN))
+		netdev->features ^= I40EVF_VLAN_FEATURES;
 
 	adapter->vsi.id = adapter->vsi_res->vsi_id;
 
-- 
2.5.5