[PATCH v2] net: macb: do not scan PHYs manually

[Nathan Sullivan <nathan.sullivan@ni.com>]

Since of_mdiobus_register and mdiobus_register will scan automatically,
do not manually scan for PHY devices in the macb ethernet driver. Doing
so will result in many nonexistent PHYs on the MDIO bus if the MDIO
lines are floating or grounded, such as when they are not used.

Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
---
 drivers/net/ethernet/cadence/macb.c |   19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 48a7d7d..6506b4e 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -424,7 +424,7 @@ static int macb_mii_init(struct macb *bp)
 {
 	struct macb_platform_data *pdata;
 	struct device_node *np;
-	int err = -ENXIO, i;
+	int err = -ENXIO;
 
 	/* Enable management port */
 	macb_writel(bp, NCR, MACB_BIT(MPE));
@@ -450,23 +450,6 @@ static int macb_mii_init(struct macb *bp)
 	if (np) {
 		/* try dt phy registration */
 		err = of_mdiobus_register(bp->mii_bus, np);
-
-		/* fallback to standard phy registration if no phy were
-		   found during dt phy registration */
-		if (!err && !phy_find_first(bp->mii_bus)) {
-			for (i = 0; i < PHY_MAX_ADDR; i++) {
-				struct phy_device *phydev;
-
-				phydev = mdiobus_scan(bp->mii_bus, i);
-				if (IS_ERR(phydev)) {
-					err = PTR_ERR(phydev);
-					break;
-				}
-			}
-
-			if (err)
-				goto err_out_unregister_bus;
-		}
 	} else {
 		if (pdata)
 			bp->mii_bus->phy_mask = pdata->phy_mask;
-- 
1.7.10.4