From: Tom Herbert <tom@herbertland.com>
To: <davem@davemloft.net>, <netdev@vger.kernel.org>
Cc: <kernel-team@fb.com>
Subject: [PATCH next-next 4/7] ipv6: Create ip6_tnl_xmit
Date: Fri, 29 Apr 2016 17:12:18 -0700 [thread overview]
Message-ID: <1461975141-954269-5-git-send-email-tom@herbertland.com> (raw)
In-Reply-To: <1461975141-954269-1-git-send-email-tom@herbertland.com>
This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other
users like GRE will be able to call this. The original ip6_tnl_xmit
function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit
function).
Signed-off-by: Tom Herbert <tom@herbertland.com>
---
include/net/ip6_tunnel.h | 2 ++
net/ipv6/ip6_tunnel.c | 47 ++++++++++++++++++++++++++++++-----------------
2 files changed, 32 insertions(+), 17 deletions(-)
diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h
index eab3a9b..835491b 100644
--- a/include/net/ip6_tunnel.h
+++ b/include/net/ip6_tunnel.h
@@ -69,6 +69,8 @@ int ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
bool log_ecn_error);
int ip6_tnl_xmit_ctl(struct ip6_tnl *t, const struct in6_addr *laddr,
const struct in6_addr *raddr);
+int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield,
+ struct flowi6 *fl6, int encap_limit, __u32 *pmtu, __u8 proto);
__u16 ip6_tnl_parse_tlv_enc_lim(struct sk_buff *skb, __u8 *raw);
__u32 ip6_tnl_get_cap(struct ip6_tnl *t, const struct in6_addr *laddr,
const struct in6_addr *raddr);
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 94ed065..b1f31d2 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -979,13 +979,14 @@ int ip6_tnl_xmit_ctl(struct ip6_tnl *t,
EXPORT_SYMBOL_GPL(ip6_tnl_xmit_ctl);
/**
- * ip6_tnl_xmit2 - encapsulate packet and send
+ * ip6_tnl_xmit - encapsulate packet and send
* @skb: the outgoing socket buffer
* @dev: the outgoing tunnel device
* @dsfield: dscp code for outer header
- * @fl: flow of tunneled packet
+ * @fl6: flow of tunneled packet
* @encap_limit: encapsulation limit
* @pmtu: Path MTU is stored if packet is too big
+ * @proto: next header value
*
* Description:
* Build new header and do some sanity checks on the packet before sending
@@ -997,12 +998,9 @@ EXPORT_SYMBOL_GPL(ip6_tnl_xmit_ctl);
* %-EMSGSIZE message too big. return mtu in this case.
**/
-static int ip6_tnl_xmit2(struct sk_buff *skb,
- struct net_device *dev,
- __u8 dsfield,
- struct flowi6 *fl6,
- int encap_limit,
- __u32 *pmtu)
+int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield,
+ struct flowi6 *fl6, int encap_limit, __u32 *pmtu,
+ __u8 proto)
{
struct ip6_tnl *t = netdev_priv(dev);
struct net *net = t->net;
@@ -1013,7 +1011,6 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
struct net_device *tdev;
int mtu;
unsigned int max_headroom = sizeof(struct ipv6hdr);
- u8 proto;
int err = -1;
/* NBMA tunnel */
@@ -1075,12 +1072,23 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
mtu = IPV6_MIN_MTU;
if (skb_dst(skb))
skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu);
- if (skb->len > mtu) {
+ if (skb->len > mtu && !skb_is_gso(skb)) {
*pmtu = mtu;
err = -EMSGSIZE;
goto tx_err_dst_release;
}
+ if (t->err_count > 0) {
+ if (time_before(jiffies,
+ t->err_time + IP6TUNNEL_ERR_TIMEO)) {
+ t->err_count--;
+
+ dst_link_failure(skb);
+ } else {
+ t->err_count = 0;
+ }
+ }
+
skb_scrub_packet(skb, !net_eq(t->net, dev_net(dev)));
/*
@@ -1108,7 +1116,6 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
skb->transport_header = skb->network_header;
- proto = fl6->flowi6_proto;
if (encap_limit >= 0) {
init_tel_txopt(&opt, encap_limit);
ipv6_push_nfrag_opts(skb, &opt.ops, &proto, NULL);
@@ -1119,6 +1126,11 @@ static int ip6_tnl_xmit2(struct sk_buff *skb,
skb->encapsulation = 1;
}
+ max_headroom = LL_RESERVED_SPACE(dst->dev) + sizeof(struct ipv6hdr)
+ + dst->header_len;
+ if (max_headroom > dev->needed_headroom)
+ dev->needed_headroom = max_headroom;
+
skb_push(skb, sizeof(struct ipv6hdr));
skb_reset_network_header(skb);
ipv6h = ipv6_hdr(skb);
@@ -1137,6 +1149,7 @@ tx_err_dst_release:
dst_release(dst);
return err;
}
+EXPORT_SYMBOL(ip6_tnl_xmit);
static inline int
ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -1160,7 +1173,6 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
encap_limit = t->parms.encap_limit;
memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
- fl6.flowi6_proto = IPPROTO_IPIP;
dsfield = ipv4_get_dsfield(iph);
@@ -1170,7 +1182,8 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
- err = ip6_tnl_xmit2(skb, dev, dsfield, &fl6, encap_limit, &mtu);
+ err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
+ IPPROTO_IPIP);
if (err != 0) {
/* XXX: send ICMP error even if DF is not set. */
if (err == -EMSGSIZE)
@@ -1214,7 +1227,6 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
encap_limit = t->parms.encap_limit;
memcpy(&fl6, &t->fl.u.ip6, sizeof(fl6));
- fl6.flowi6_proto = IPPROTO_IPV6;
dsfield = ipv6_get_dsfield(ipv6h);
if (t->parms.flags & IP6_TNL_F_USE_ORIG_TCLASS)
@@ -1224,7 +1236,8 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
if (t->parms.flags & IP6_TNL_F_USE_ORIG_FWMARK)
fl6.flowi6_mark = skb->mark;
- err = ip6_tnl_xmit2(skb, dev, dsfield, &fl6, encap_limit, &mtu);
+ err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
+ IPPROTO_IPV6);
if (err != 0) {
if (err == -EMSGSIZE)
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
@@ -1235,7 +1248,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
}
static netdev_tx_t
-ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev)
+ip6_tnl_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ip6_tnl *t = netdev_priv(dev);
struct net_device_stats *stats = &t->dev->stats;
@@ -1556,7 +1569,7 @@ EXPORT_SYMBOL(ip6_tnl_get_iflink);
static const struct net_device_ops ip6_tnl_netdev_ops = {
.ndo_init = ip6_tnl_dev_init,
.ndo_uninit = ip6_tnl_dev_uninit,
- .ndo_start_xmit = ip6_tnl_xmit,
+ .ndo_start_xmit = ip6_tnl_start_xmit,
.ndo_do_ioctl = ip6_tnl_ioctl,
.ndo_change_mtu = ip6_tnl_change_mtu,
.ndo_get_stats = ip6_get_stats,
--
2.8.0.rc2
next prev parent reply other threads:[~2016-04-30 0:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-30 0:12 [PATCH next-next 0/7] net: Cleanup IPv6 ip tunnels Tom Herbert
2016-04-30 0:12 ` [PATCH next-next 1/7] ipv6: Cleanup IPv6 tunnel receive path Tom Herbert
2016-04-30 0:12 ` [PATCH next-next 2/7] gre: Move utility functions to common headers Tom Herbert
2016-05-03 11:29 ` Jiri Benc
2016-05-04 4:53 ` David Miller
2016-05-04 8:35 ` Jiri Benc
2016-05-04 16:45 ` David Miller
2016-04-30 0:12 ` [PATCH next-next 3/7] gre6: Cleanup GREv6 receive path, call common GRE functions Tom Herbert
2016-04-30 0:12 ` Tom Herbert [this message]
2016-04-30 0:12 ` [PATCH next-next 5/7] gre: Create common functions for transmit Tom Herbert
2016-04-30 0:12 ` [PATCH net-next 6/7] ipv6: Generic tunnel cleanup Tom Herbert
2016-04-30 0:12 ` [PATCH next-next 7/7] gre6: Cleanup GREv6 transmit path, call common GRE functions Tom Herbert
2016-04-30 1:00 ` [PATCH next-next 0/7] net: Cleanup IPv6 ip tunnels Alexander Duyck
2016-05-02 19:32 ` Tom Herbert
2016-05-02 19:42 ` Alexander Duyck
2016-05-02 23:23 ` David Miller
2016-05-03 2:03 ` Alexander Duyck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461975141-954269-5-git-send-email-tom@herbertland.com \
--to=tom@herbertland.com \
--cc=davem@davemloft.net \
--cc=kernel-team@fb.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).