[PATCH V3 3/4] net-next: mediatek: add fixed-phy support

[John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>]

The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1
needs to be configured using a fixed link speed and flow control settings.
The easiest way to do this is to used the fixed-phy driver, allowing us to
reuse the existing mdio polling code to setup the MAC.

Reviewed-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Signed-off-by: John Crispin <john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index a76aec20..4d59bda 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -219,6 +219,9 @@ static int mtk_phy_connect(struct mtk_mac *mac)
 	u32 val, ge_mode;
 
 	np = of_parse_phandle(mac->of_node, "phy-handle", 0);
+	if (!np && of_phy_is_fixed_link(mac->of_node))
+		if (!of_phy_register_fixed_link(mac->of_node))
+			np = of_node_get(mac->of_node);
 	if (!np)
 		return -ENODEV;
 
-- 
1.7.10.4