From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Crispin Subject: [PATCH V3 3/4] net-next: mediatek: add fixed-phy support Date: Tue, 10 May 2016 07:08:40 +0200 Message-ID: <1462856921-27441-4-git-send-email-john@phrozen.org> References: <1462856921-27441-1-git-send-email-john@phrozen.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, John Crispin , linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, nbd-Vt+b4OUoWG0@public.gmane.org To: "David S. Miller" Return-path: In-Reply-To: <1462856921-27441-1-git-send-email-john-Pj+rj9U5foFAfugRpC6u6w@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+glpam-linux-mediatek=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: netdev.vger.kernel.org The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1 needs to be configured using a fixed link speed and flow control settings. The easiest way to do this is to used the fixed-phy driver, allowing us to reuse the existing mdio polling code to setup the MAC. Reviewed-by: Andrew Lunn Signed-off-by: John Crispin --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index a76aec20..4d59bda 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -219,6 +219,9 @@ static int mtk_phy_connect(struct mtk_mac *mac) u32 val, ge_mode; np = of_parse_phandle(mac->of_node, "phy-handle", 0); + if (!np && of_phy_is_fixed_link(mac->of_node)) + if (!of_phy_register_fixed_link(mac->of_node)) + np = of_node_get(mac->of_node); if (!np) return -ENODEV; -- 1.7.10.4