netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <simon.horman@netronome.com>
To: netdev@vger.kernel.org
Cc: dev@openvswitch.org
Subject: [PATCH net-next v10 0/5] openvswitch: support for layer 3 encapsulated packets
Date: Thu,  2 Jun 2016 15:24:41 +0900	[thread overview]
Message-ID: <1464848686-7656-1-git-send-email-simon.horman@netronome.com> (raw)

At the core of this patch set is removing the assumption in Open vSwitch
datapath that all packets have Ethernet header. Support for layer 3 GRE
tunnels is also added by this patchset.

The implementation relies on the presence of pop_eth and push_eth actions
in datapath flows to facilitate adding and removing Ethernet headers as
appropriate. The construction of such flows is left up to user-space.

This series is based on work by Lorand Jakab, Thomas Morin and others.
And it relies on recently merged work by Jiri Benc, much thanks to him for
his help.

This patch set is comprised of kernel patches against net-next.

To aid review it and the above dependency is available at:

    tree: https://github.com/horms/openvswitch
    branch: me/l3-vpn
    tag: l3-vpn-v10

There is a companion patch set for the Open vSwitch user-space code
which I will post separately to the dev@openvswitch.org mailing list as:

    "[PATCH v11 0/5] userspace: Support for layer 3 encapsulated packets"


Changes since the previous posting are noted in the changelogs
of individual patches.


Lorand Jakab (1):
  openvswitch: add layer 3 flow/port support

Simon Horman (4):
  net: add skb_vlan_accel helper
  openvswitch: set skb protocol and mac_len when receiving on internal
    device
  openvswitch: add support to push and pop mpls for layer3 packets
  openvswitch: use ipgre tunnel rather than gretap tunnel

 include/linux/skbuff.h               |   1 +
 include/net/gre.h                    |   4 +-
 include/uapi/linux/openvswitch.h     |  13 +++
 net/core/skbuff.c                    |  28 +++--
 net/ipv4/ip_gre.c                    |   9 +-
 net/openvswitch/actions.c            |  72 +++++++++++--
 net/openvswitch/datapath.c           |  13 +--
 net/openvswitch/flow.c               |  57 ++++++----
 net/openvswitch/flow.h               |   4 +-
 net/openvswitch/flow_netlink.c       | 200 +++++++++++++++++++++++++----------
 net/openvswitch/vport-geneve.c       |   2 +-
 net/openvswitch/vport-gre.c          |   4 +-
 net/openvswitch/vport-internal_dev.c |  10 ++
 net/openvswitch/vport-netdev.c       |  43 +++++++-
 net/openvswitch/vport-netdev.h       |   2 +
 net/openvswitch/vport-vxlan.c        |   2 +-
 16 files changed, 344 insertions(+), 120 deletions(-)

-- 
2.1.4

             reply	other threads:[~2016-06-02  6:24 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-02  6:24 Simon Horman [this message]
2016-06-02  6:24 ` [PATCH net-next v10 1/5] net: add skb_vlan_accel helper Simon Horman
2016-06-02 22:01   ` pravin shelar
2016-06-02  6:24 ` [PATCH net-next v10 2/5] openvswitch: set skb protocol and mac_len when receiving on internal device Simon Horman
     [not found]   ` <1464848686-7656-3-git-send-email-simon.horman-wFxRvT7yatFl57MIdRCFDg@public.gmane.org>
2016-06-02 22:01     ` pravin shelar
2016-06-07  3:08       ` Simon Horman
     [not found]         ` <20160607030809.GE31696-IxS8c3vjKQDk1uMJSBkQmQ@public.gmane.org>
2016-06-07 22:45           ` pravin shelar
2016-06-17  5:53             ` Simon Horman
     [not found]               ` <20160617055331.GA24833-IxS8c3vjKQDk1uMJSBkQmQ@public.gmane.org>
2016-06-19  1:38                 ` pravin shelar
     [not found]                   ` <CAOrHB_BWfLk8yba2XkF43Hm-czGUZnVWQQ=HW3-vvpFEH7GNpA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-21  2:25                     ` Simon Horman
     [not found]                       ` <20160621022458.GA28358-IxS8c3vjKQDk1uMJSBkQmQ@public.gmane.org>
2016-06-21 16:30                         ` pravin shelar
2016-06-23  2:04                           ` Simon Horman
2016-06-27  9:35                             ` Jiri Benc
2016-06-02  6:24 ` [PATCH net-next v10 3/5] openvswitch: add support to push and pop mpls for layer3 packets Simon Horman
2016-06-02 22:02   ` pravin shelar
2016-06-07  2:51     ` Simon Horman
2016-06-07 22:45       ` pravin shelar
2016-06-02  6:24 ` [PATCH net-next v10 4/5] openvswitch: add layer 3 flow/port support Simon Horman
     [not found]   ` <1464848686-7656-5-git-send-email-simon.horman-wFxRvT7yatFl57MIdRCFDg@public.gmane.org>
2016-06-02 22:02     ` pravin shelar
2016-06-07  2:46       ` Simon Horman
     [not found]         ` <20160607024609.GC31696-IxS8c3vjKQDk1uMJSBkQmQ@public.gmane.org>
2016-06-07 22:45           ` pravin shelar
2016-06-17  6:53             ` Simon Horman
2016-06-02  6:24 ` [PATCH net-next v10 5/5] openvswitch: use ipgre tunnel rather than gretap tunnel Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464848686-7656-1-git-send-email-simon.horman@netronome.com \
    --to=simon.horman@netronome.com \
    --cc=dev@openvswitch.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).