From: David Ahern <dsa@cumulusnetworks.com>
To: netdev@vger.kernel.org
Cc: David Ahern <dsa@cumulusnetworks.com>
Subject: [PATCH net-next 0/3] net: vrf: Add support for local traffic to local addresses
Date: Thu, 2 Jun 2016 13:15:09 -0700 [thread overview]
Message-ID: <1464898512-5157-1-git-send-email-dsa@cumulusnetworks.com> (raw)
Add support for locally originated traffic to VRF-local addresses,
be it addresses on enslaved devices or addresses on the VRF device:
$ ip addr show dev red
33: red: <NOARP,MASTER,UP,LOWER_UP> mtu 65536 qdisc pfifo_fast state UP group default qlen 1000
link/ether be:00:53:b5:e4:25 brd ff:ff:ff:ff:ff:ff
inet 1.1.1.1/32 scope global red
valid_lft forever preferred_lft forever
inet6 1111:1::1/128 scope global
valid_lft forever preferred_lft forever
$ ip addr show dev eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master red state UP group default qlen 1000
link/ether 02:e0:f9:79:34:bd brd ff:ff:ff:ff:ff:ff
inet 10.100.1.1/24 brd 10.100.1.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 2100:1::1/120 scope global
valid_lft forever preferred_lft forever
inet6 fe80::e0:f9ff:fe79:34bd/64 scope link
valid_lft forever preferred_lft forever
$ ping -c1 -I red 10.100.1.1
ping: Warning: source address might be selected on device other than red.
PING 10.100.1.1 (10.100.1.1) from 10.100.1.1 red: 56(84) bytes of data.
64 bytes from 10.100.1.1: icmp_seq=1 ttl=64 time=0.057 ms
$ ping -c1 -I red 1.1.1.1
PING 1.1.1.1 (1.1.1.1) from 1.1.1.1 red: 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=64 time=0.136 ms
--- 1.1.1.1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.136/0.136/0.136/0.000 ms
$ ping6 -c1 -I red 2100:1::1
ping6: Warning: source address might be selected on device other than red.
PING 2100:1::1(2100:1::1) from 2100:1::1 red: 56 data bytes
64 bytes from 2100:1::1: icmp_seq=1 ttl=64 time=0.167 ms
--- 2100:1::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.167/0.167/0.167/0.000 ms
$ ping6 -c1 -I red 1111::1
PING 1111::1(1111::1) from 1111:1::1 red: 56 data bytes
64 bytes from 1111::1: icmp_seq=1 ttl=64 time=0.187 ms
--- 1111::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.187/0.187/0.187/0.000 ms
This change also enables use of loopback address on the VRF device:
$ ip addr add dev red 127.0.0.1/8
$ ping -c1 -I red 127.0.0.1
PING 127.0.0.1 (127.0.0.1) from 127.0.0.1 red: 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.058 ms
David Ahern (3):
net: vrf: Minor refactoring for local address patches
net: vrf: ipv4 support for local traffic to local addresses
net: vrf: ipv6 support for local traffic to local addresses
drivers/net/vrf.c | 234 ++++++++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 201 insertions(+), 33 deletions(-)
--
2.1.4
next reply other threads:[~2016-06-02 20:16 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-02 20:15 David Ahern [this message]
2016-06-02 20:15 ` [PATCH net-next 1/3] net: vrf: Minor refactoring for local address patches David Ahern
2016-06-02 20:15 ` [PATCH net-next 2/3] net: vrf: ipv4 support for local traffic to local addresses David Ahern
2016-06-02 20:15 ` [PATCH net-next 3/3] net: vrf: ipv6 " David Ahern
2016-06-06 22:12 ` [PATCH net-next 0/3] net: vrf: Add " David Miller
2016-06-06 22:56 ` David Miller
2016-06-06 23:01 ` David Ahern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464898512-5157-1-git-send-email-dsa@cumulusnetworks.com \
--to=dsa@cumulusnetworks.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).