From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, andrew@lunn.ch,
vivien.didelot@savoirfairelinux.com, john@phrozen.org,
Florian Fainelli <f.fainelli@gmail.com>
Subject: [PATCH net-next 8/9] net: dsa: bcm_sf2: Make it a real platform device driver
Date: Fri, 3 Jun 2016 17:05:32 -0700 [thread overview]
Message-ID: <1464998733-10405-13-git-send-email-f.fainelli@gmail.com> (raw)
In-Reply-To: <1464998733-10405-1-git-send-email-f.fainelli@gmail.com>
The Broadcom Starfighter 2 switch driver should be a proper platform
driver, now that the DSA code has been updated to allow that, register a
switch device, feed it with the proper configuration data coming from
Device Tree and register our switch device with DSA.
The bulk of the changes consist in moving what bcm_sf2_sw_setup() did
into the platform driver probe function.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 251 ++++++++++++++++++++++++++++------------------
net/dsa/dsa.c | 1 -
2 files changed, 151 insertions(+), 101 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 73df91bb0466..8dac74a6b5df 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -934,77 +934,8 @@ static void bcm_sf2_identify_ports(struct bcm_sf2_priv *priv,
static int bcm_sf2_sw_setup(struct dsa_switch *ds)
{
- const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
struct bcm_sf2_priv *priv = ds_to_priv(ds);
- struct device_node *dn;
- void __iomem **base;
unsigned int port;
- unsigned int i;
- u32 reg, rev;
- int ret;
-
- spin_lock_init(&priv->indir_lock);
- mutex_init(&priv->stats_mutex);
-
- /* All the interesting properties are at the parent device_node
- * level
- */
- dn = ds->cd->of_node->parent;
- bcm_sf2_identify_ports(priv, ds->cd->of_node);
-
- priv->irq0 = irq_of_parse_and_map(dn, 0);
- priv->irq1 = irq_of_parse_and_map(dn, 1);
-
- base = &priv->core;
- for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- *base = of_iomap(dn, i);
- if (*base == NULL) {
- pr_err("unable to find register: %s\n", reg_names[i]);
- ret = -ENOMEM;
- goto out_unmap;
- }
- base++;
- }
-
- ret = bcm_sf2_sw_rst(priv);
- if (ret) {
- pr_err("unable to software reset switch: %d\n", ret);
- goto out_unmap;
- }
-
- /* Disable all interrupts and request them */
- bcm_sf2_intr_disable(priv);
-
- ret = request_irq(priv->irq0, bcm_sf2_switch_0_isr, 0,
- "switch_0", priv);
- if (ret < 0) {
- pr_err("failed to request switch_0 IRQ\n");
- goto out_unmap;
- }
-
- ret = request_irq(priv->irq1, bcm_sf2_switch_1_isr, 0,
- "switch_1", priv);
- if (ret < 0) {
- pr_err("failed to request switch_1 IRQ\n");
- goto out_free_irq0;
- }
-
- /* Reset the MIB counters */
- reg = core_readl(priv, CORE_GMNCFGCFG);
- reg |= RST_MIB_CNT;
- core_writel(priv, reg, CORE_GMNCFGCFG);
- reg &= ~RST_MIB_CNT;
- core_writel(priv, reg, CORE_GMNCFGCFG);
-
- /* Get the maximum number of ports for this switch */
- priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
- if (priv->hw_params.num_ports > DSA_MAX_PORTS)
- priv->hw_params.num_ports = DSA_MAX_PORTS;
-
- /* Assume a single GPHY setup if we can't read that property */
- if (of_property_read_u32(dn, "brcm,num-gphy",
- &priv->hw_params.num_gphy))
- priv->hw_params.num_gphy = 1;
/* Enable all valid ports and disable those unused */
for (port = 0; port < priv->hw_params.num_ports; port++) {
@@ -1034,31 +965,7 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
else
ds->phys_mii_mask = 0;
- rev = reg_readl(priv, REG_SWITCH_REVISION);
- priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
- SWITCH_TOP_REV_MASK;
- priv->hw_params.core_rev = (rev & SF2_REV_MASK);
-
- rev = reg_readl(priv, REG_PHY_REVISION);
- priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
-
- pr_info("Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
- priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
- priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
- priv->core, priv->irq0, priv->irq1);
-
return 0;
-
-out_free_irq0:
- free_irq(priv->irq0, priv);
-out_unmap:
- base = &priv->core;
- for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- if (*base)
- iounmap(*base);
- base++;
- }
- return ret;
}
static int bcm_sf2_sw_set_addr(struct dsa_switch *ds, u8 *addr)
@@ -1370,7 +1277,7 @@ static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
return p->ethtool_ops->set_wol(p, wol);
}
-static struct dsa_switch_driver bcm_sf2_switch_driver = {
+static struct dsa_switch_driver bcm_sf2_switch_ops = {
.tag_protocol = DSA_TAG_PROTO_BRCM,
.probe = bcm_sf2_sw_drv_probe,
.setup = bcm_sf2_sw_setup,
@@ -1400,19 +1307,163 @@ static struct dsa_switch_driver bcm_sf2_switch_driver = {
.port_fdb_dump = bcm_sf2_sw_fdb_dump,
};
-static int __init bcm_sf2_init(void)
+static int bcm_sf2_sw_probe(struct platform_device *pdev)
{
- register_switch_driver(&bcm_sf2_switch_driver);
+ const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
+ struct resource *res;
+ struct dsa_switch *ds;
+ struct bcm_sf2_priv *priv;
+ struct device_node *dn = pdev->dev.of_node;
+ void __iomem **base;
+ unsigned int i;
+ u32 reg, rev;
+ int ret;
+
+ ds = devm_kzalloc(&pdev->dev, sizeof(*ds) + sizeof(*priv), GFP_KERNEL);
+ if (!ds)
+ return -ENOMEM;
+
+ priv = (struct bcm_sf2_priv *)(ds + 1);
+
+ ds->priv = priv;
+ ds->dev = &pdev->dev;
+ ds->drv = &bcm_sf2_switch_ops;
+
+ spin_lock_init(&priv->indir_lock);
+ mutex_init(&priv->stats_mutex);
+
+ /* The port information of the switch is in the immediate child
+ * sub-node
+ */
+ bcm_sf2_identify_ports(priv, dn->child);
+
+ priv->irq0 = platform_get_irq(pdev, 0);
+ priv->irq1 = platform_get_irq(pdev, 1);
+
+ base = &priv->core;
+ for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ *base = devm_ioremap_resource(&pdev->dev, res);
+ if (*base == NULL) {
+ dev_err(&pdev->dev,
+ "unable to find register: %s\n", reg_names[i]);
+ return -ENODEV;
+ }
+ base++;
+ }
+
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("unable to software reset switch: %d\n", ret);
+ return ret;
+ }
+
+ /* Disable all interrupts and request them */
+ bcm_sf2_intr_disable(priv);
+
+ ret = devm_request_irq(&pdev->dev, priv->irq0, bcm_sf2_switch_0_isr, 0,
+ "switch_0", priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request switch_0 IRQ\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, priv->irq1, bcm_sf2_switch_1_isr, 0,
+ "switch_1", priv);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request switch_1 IRQ\n");
+ return ret;
+ }
+
+ /* Reset the MIB counters */
+ reg = core_readl(priv, CORE_GMNCFGCFG);
+ reg |= RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+ reg &= ~RST_MIB_CNT;
+ core_writel(priv, reg, CORE_GMNCFGCFG);
+
+ /* Get the maximum number of ports for this switch */
+ priv->hw_params.num_ports = core_readl(priv, CORE_IMP0_PRT_ID) + 1;
+ if (priv->hw_params.num_ports > DSA_MAX_PORTS)
+ priv->hw_params.num_ports = DSA_MAX_PORTS;
+
+ /* Assume a single GPHY setup if we can't read that property */
+ if (of_property_read_u32(dn, "brcm,num-gphy",
+ &priv->hw_params.num_gphy))
+ priv->hw_params.num_gphy = 1;
+
+ rev = reg_readl(priv, REG_SWITCH_REVISION);
+ priv->hw_params.top_rev = (rev >> SWITCH_TOP_REV_SHIFT) &
+ SWITCH_TOP_REV_MASK;
+ priv->hw_params.core_rev = (rev & SF2_REV_MASK);
+
+ rev = reg_readl(priv, REG_PHY_REVISION);
+ priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
+
+ dev_set_drvdata(&pdev->dev, ds);
+
+ ret = dsa_register_switch(ds, pdev->dev.of_node);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev,
+ "Starfighter 2 top: %x.%02x, core: %x.%02x base: 0x%p, IRQs: %d, %d\n",
+ priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+ priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
+ priv->core, priv->irq0, priv->irq1);
+
+ return 0;
+}
+
+static int bcm_sf2_sw_remove(struct platform_device *pdev)
+{
+ struct dsa_switch *ds = platform_get_drvdata(pdev);
+ struct bcm_sf2_priv *priv = ds_to_priv(ds);
+
+ /* Disable all ports and interrupts */
+ priv->wol_ports_mask = 0;
+ bcm_sf2_sw_suspend(ds);
+ dsa_unregister_switch(ds);
return 0;
}
-module_init(bcm_sf2_init);
-static void __exit bcm_sf2_exit(void)
+#ifdef CONFIG_PM_SLEEP
+static int bcm_sf2_suspend(struct device *dev)
{
- unregister_switch_driver(&bcm_sf2_switch_driver);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dsa_switch *ds = platform_get_drvdata(pdev);
+
+ return dsa_switch_suspend(ds);
}
-module_exit(bcm_sf2_exit);
+
+static int bcm_sf2_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dsa_switch *ds = platform_get_drvdata(pdev);
+
+ return dsa_switch_resume(ds);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(bcm_sf2_pm_ops,
+ bcm_sf2_suspend, bcm_sf2_resume);
+
+static const struct of_device_id bcm_sf2_of_match[] = {
+ { .compatible = "brcm,bcm7445-switch-v4.0" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver bcm_sf2_driver = {
+ .probe = bcm_sf2_sw_probe,
+ .remove = bcm_sf2_sw_remove,
+ .driver = {
+ .name = "brcm-sf2",
+ .of_match_table = bcm_sf2_of_match,
+ .pm = &bcm_sf2_pm_ops,
+ },
+};
+module_platform_driver(bcm_sf2_driver);
MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Driver for Broadcom Starfighter 2 ethernet switch chip");
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 8fb8de6fb82d..7abe0cd3af9c 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -1065,7 +1065,6 @@ static int dsa_resume(struct device *d)
static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa_suspend, dsa_resume);
static const struct of_device_id dsa_of_match_table[] = {
- { .compatible = "brcm,bcm7445-switch-v4.0" },
{ .compatible = "marvell,dsa", },
{}
};
--
2.7.4
next prev parent reply other threads:[~2016-06-04 0:06 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-04 0:05 [PATCH net-next 0/9] net: dsa: misc improvements Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 1/9] net: dsa: Prepare to support legacy DT binding Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next] net: dsa: Provide CPU port statistics to master netdev Florian Fainelli
2016-06-04 0:06 ` Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next] net: dsa: bcm_sf2: Implement FDB operations Florian Fainelli
2016-06-04 0:06 ` Florian Fainelli
2016-06-06 13:30 ` Vivien Didelot
2016-06-04 0:05 ` [PATCH net-next 2/9] net: dsa: Add support for parsing the old binding Florian Fainelli
2016-06-04 19:44 ` Andrew Lunn
2016-06-04 20:00 ` Andrew Lunn
2016-06-05 22:42 ` Florian Fainelli
2016-06-06 3:19 ` Andrew Lunn
2016-06-06 20:13 ` Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 3/9] net: dsa: Provide unique DSA slave MII bus names Florian Fainelli
2016-06-04 20:00 ` Andrew Lunn
2016-06-06 13:36 ` Vivien Didelot
2016-06-04 0:05 ` [PATCH net-next 4/9] net: dsa: Initialize ds->enabled_port_mask and ds->phys_mii_mask Florian Fainelli
2016-06-04 20:29 ` Andrew Lunn
2016-06-05 22:38 ` Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 5/9] net: dsa: Export suspend/resume functions Florian Fainelli
2016-06-04 20:30 ` Andrew Lunn
2016-06-06 13:40 ` Vivien Didelot
2016-06-04 0:05 ` [PATCH net-next 6/9] net: dsa: Add initialization helper for CPU port ethtool_ops Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 6/7] net: dsa: bcm_sf2: Make it a real platform device driver Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 7/9] net: dsa: Initialize CPU port ethtool ops per tree Florian Fainelli
2016-06-04 20:38 ` Andrew Lunn
2016-06-05 22:29 ` Florian Fainelli
2016-06-06 2:40 ` Andrew Lunn
2016-06-04 0:05 ` [PATCH net-next 7/7] net: dsa: bcm_sf2: Register our slave MDIO bus Florian Fainelli
2016-06-04 20:49 ` Andrew Lunn
2016-06-04 0:05 ` Florian Fainelli [this message]
2016-06-04 20:55 ` [PATCH net-next 8/9] net: dsa: bcm_sf2: Make it a real platform device driver Andrew Lunn
2016-06-05 22:30 ` Florian Fainelli
2016-06-04 0:05 ` [PATCH net-next 9/9] net: dsa: bcm_sf2: Register our slave MDIO bus Florian Fainelli
2016-06-04 0:10 ` [PATCH net-next 0/9] net: dsa: misc improvements Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1464998733-10405-13-git-send-email-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=john@phrozen.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).