From: "Rafał Miłecki" <zajec5@gmail.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: "Rafał Miłecki" <zajec5@gmail.com>,
"Brett Rudley" <brudley@broadcom.com>,
"Arend van Spriel" <arend@broadcom.com>,
"Franky (Zhenhui) Lin" <frankyl@broadcom.com>,
"Hante Meuleman" <meuleman@broadcom.com>,
"Pieter-Paul Giesberts" <pieterpg@broadcom.com>,
linux-wireless@vger.kernel.org (open list:BROADCOM BRCM80211
IEEE802.11n WIRELESS DRIVER),
brcm80211-dev-list@broadcom.com (open list:BROADCOM BRCM80211
IEEE802.11n WIRELESS DRIVER),
netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] brcmfmac: slightly simplify building interface combinations
Date: Tue, 7 Jun 2016 21:10:18 +0200 [thread overview]
Message-ID: <1465326626-365-1-git-send-email-zajec5@gmail.com> (raw)
This change reorders some operations in brcmf_setup_ifmodes in hope to
make it simpler:
1) It allocates arrays right before filling them. This way it's easier
to follow requested array length as it's immediately followed by
code filling it. It's easier to check e.g. why we need 4 entries for
P2P. Other than that it deduplicates some checks (e.g. for P2P).
2) It reorders code to first prepare limits and then define a new combo.
Previously this was mixed (e.g. we were setting num of channels
before preparing limits).
3) It modifies mbss code to use i variable just like other combos do.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 37 ++++++++++------------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 4894eb7..33e682e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -6300,29 +6300,15 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
if (!combo)
goto err;
- c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
- if (!c0_limits)
- goto err;
-
- if (p2p) {
- p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
- if (!p2p_limits)
- goto err;
- }
-
- if (mbss) {
- mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
- if (!mbss_limits)
- goto err;
- }
-
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
BIT(NL80211_IFTYPE_AP);
c = 0;
i = 0;
- combo[c].num_different_channels = 1;
+ c0_limits = kcalloc(p2p ? 3 : 2, sizeof(*c0_limits), GFP_KERNEL);
+ if (!c0_limits)
+ goto err;
c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
if (p2p) {
@@ -6340,6 +6326,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
c0_limits[i].max = 1;
c0_limits[i++].types = BIT(NL80211_IFTYPE_AP);
}
+ combo[c].num_different_channels = 1;
combo[c].max_interfaces = i;
combo[c].n_limits = i;
combo[c].limits = c0_limits;
@@ -6347,7 +6334,9 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
if (p2p) {
c++;
i = 0;
- combo[c].num_different_channels = 1;
+ p2p_limits = kcalloc(4, sizeof(*p2p_limits), GFP_KERNEL);
+ if (!p2p_limits)
+ goto err;
p2p_limits[i].max = 1;
p2p_limits[i++].types = BIT(NL80211_IFTYPE_STATION);
p2p_limits[i].max = 1;
@@ -6356,6 +6345,7 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_CLIENT);
p2p_limits[i].max = 1;
p2p_limits[i++].types = BIT(NL80211_IFTYPE_P2P_DEVICE);
+ combo[c].num_different_channels = 1;
combo[c].max_interfaces = i;
combo[c].n_limits = i;
combo[c].limits = p2p_limits;
@@ -6363,14 +6353,19 @@ static int brcmf_setup_ifmodes(struct wiphy *wiphy, struct brcmf_if *ifp)
if (mbss) {
c++;
+ i = 0;
+ mbss_limits = kcalloc(1, sizeof(*mbss_limits), GFP_KERNEL);
+ if (!mbss_limits)
+ goto err;
+ mbss_limits[i].max = 4;
+ mbss_limits[i++].types = BIT(NL80211_IFTYPE_AP);
combo[c].beacon_int_infra_match = true;
combo[c].num_different_channels = 1;
- mbss_limits[0].max = 4;
- mbss_limits[0].types = BIT(NL80211_IFTYPE_AP);
combo[c].max_interfaces = 4;
- combo[c].n_limits = 1;
+ combo[c].n_limits = i;
combo[c].limits = mbss_limits;
}
+
wiphy->n_iface_combinations = n_combos;
wiphy->iface_combinations = combo;
return 0;
--
1.8.4.5
next reply other threads:[~2016-06-07 19:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-07 19:10 Rafał Miłecki [this message]
2016-06-09 18:56 ` [PATCH] brcmfmac: slightly simplify building interface combinations Arend van Spriel
2016-06-29 15:41 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465326626-365-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=arend@broadcom.com \
--cc=brcm80211-dev-list@broadcom.com \
--cc=brudley@broadcom.com \
--cc=frankyl@broadcom.com \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=meuleman@broadcom.com \
--cc=netdev@vger.kernel.org \
--cc=pieterpg@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).