[net-next PATCH 0/5] be2net: patch set

[net-next PATCH 0/5] be2net: patch set

[Sathya Perla]

Hi Dave, pls consider commiting the following patches to the net-next tree.
Thanks!

Patch 1 replaces the be_max_eqs() macro with two new macros called
be_max_nic_eqs() and be_max_func_eqs() to clear confusion in that part
of the code.

Patch 2 adds support to configure asymmetric number of rx/tx queues via
ethtool set-channels option.

Patch 3 disables EVB when VFs are not enabled on a BE3 SR-IOV config to
avoid the broadcast echo problem.

Patch 4 updates copyright markings in be2net src files

Patch 5 updates the be2net maintainers' list

Sathya Perla (3):
  be2net: fix definition of be_max_eqs()
  be2net: support asymmetric rx/tx queue counts
  be2net: update be2net maintainers list

Somnath Kotur (2):
  be2net: Fix broadcast echoes from EVB in BE3
  be2net: Change copyright markings in source files

 MAINTAINERS                                    |  3 +-
 drivers/net/ethernet/emulex/benet/be.h         | 36 +++++++++--
 drivers/net/ethernet/emulex/benet/be_cmds.c    | 13 +++-
 drivers/net/ethernet/emulex/benet/be_cmds.h    |  2 +-
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 31 +++++++--
 drivers/net/ethernet/emulex/benet/be_main.c    | 89 +++++++++++++++++---------
 drivers/net/ethernet/emulex/benet/be_roce.c    |  2 +-
 drivers/net/ethernet/emulex/benet/be_roce.h    |  2 +-
 8 files changed, 128 insertions(+), 50 deletions(-)

-- 
2.4.1

[net-next PATCH 1/5] be2net: fix definition of be_max_eqs()

[Sathya Perla]

The EQs available on a function are shared between NIC and RoCE.
The be_max_eqs() macro was so far being used to refer to the max number of
EQs available for NIC. This has caused some confusion in the code. To fix
this confusion this patch introduces a new macro called be_max_nic_eqs()
to refer to the max number of EQs avialable for NIC only and renames
be_max_eqs() to be_max_func_eqs().

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
---
 drivers/net/ethernet/emulex/benet/be.h      |  8 ++++++--
 drivers/net/ethernet/emulex/benet/be_main.c | 29 +++++++++++++----------------
 2 files changed, 19 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index e1e6c40..f8040ef 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -443,6 +443,7 @@ struct be_resources {
 	u16 max_iface_count;
 	u16 max_mcc_count;
 	u16 max_evt_qs;
+	u16 max_nic_evt_qs;	/* NIC's share of evt qs */
 	u32 if_cap_flags;
 	u32 vf_if_cap_flags;	/* VF if capability flags */
 	u32 flags;
@@ -644,7 +645,10 @@ struct be_adapter {
 #define be_max_txqs(adapter)		(adapter->res.max_tx_qs)
 #define be_max_prio_txqs(adapter)	(adapter->res.max_prio_tx_qs)
 #define be_max_rxqs(adapter)		(adapter->res.max_rx_qs)
-#define be_max_eqs(adapter)		(adapter->res.max_evt_qs)
+/* Max number of EQs available for the function (NIC + RoCE (if enabled)) */
+#define be_max_func_eqs(adapter)	(adapter->res.max_evt_qs)
+/* Max number of EQs available avaialble only for NIC */
+#define be_max_nic_eqs(adapter)		(adapter->res.max_nic_evt_qs)
 #define be_if_cap_flags(adapter)	(adapter->res.if_cap_flags)
 #define be_max_pf_pool_rss_tables(adapter)	\
 				(adapter->pool_res.max_rss_tables)
@@ -654,7 +658,7 @@ static inline u16 be_max_qs(struct be_adapter *adapter)
 	/* If no RSS, need atleast the one def RXQ */
 	u16 num = max_t(u16, be_max_rss(adapter), 1);
 
-	num = min(num, be_max_eqs(adapter));
+	num = min(num, be_max_nic_eqs(adapter));
 	return min_t(u16, num, num_online_cpus());
 }
 
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3d94789..c67830f 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3252,12 +3252,12 @@ static int be_msix_enable(struct be_adapter *adapter)
 	int i, num_vec;
 	struct device *dev = &adapter->pdev->dev;
 
-	/* If RoCE is supported, program the max number of NIC vectors that
-	 * may be configured via set-channels, along with vectors needed for
-	 * RoCe. Else, just program the number we'll use initially.
+	/* If RoCE is supported, program the max number of vectors that
+	 * could be used for NIC and RoCE, else, just program the number
+	 * we'll use initially.
 	 */
 	if (be_roce_supported(adapter))
-		num_vec = min_t(int, 2 * be_max_eqs(adapter),
+		num_vec = min_t(int, be_max_func_eqs(adapter),
 				2 * num_online_cpus());
 	else
 		num_vec = adapter->cfg_num_qs;
@@ -4219,16 +4219,13 @@ static int be_get_resources(struct be_adapter *adapter)
 	struct be_resources res = {0};
 	int status;
 
-	if (BEx_chip(adapter)) {
-		BEx_get_resources(adapter, &res);
-		adapter->res = res;
-	}
-
 	/* For Lancer, SH etc read per-function resource limits from FW.
 	 * GET_FUNC_CONFIG returns per function guaranteed limits.
 	 * GET_PROFILE_CONFIG returns PCI-E related limits PF-pool limits
 	 */
-	if (!BEx_chip(adapter)) {
+	if (BEx_chip(adapter)) {
+		BEx_get_resources(adapter, &res);
+	} else {
 		status = be_cmd_get_func_config(adapter, &res);
 		if (status)
 			return status;
@@ -4237,13 +4234,13 @@ static int be_get_resources(struct be_adapter *adapter)
 		if (res.max_rss_qs && res.max_rss_qs == res.max_rx_qs &&
 		    !(res.if_cap_flags & BE_IF_FLAGS_DEFQ_RSS))
 			res.max_rss_qs -= 1;
-
-		/* If RoCE may be enabled stash away half the EQs for RoCE */
-		if (be_roce_supported(adapter))
-			res.max_evt_qs /= 2;
-		adapter->res = res;
 	}
 
+	/* If RoCE is supported stash away half the EQs for RoCE */
+	res.max_nic_evt_qs = be_roce_supported(adapter) ?
+				res.max_evt_qs / 2 : res.max_evt_qs;
+	adapter->res = res;
+
 	/* If FW supports RSS default queue, then skip creating non-RSS
 	 * queue for non-IP traffic.
 	 */
@@ -4252,7 +4249,7 @@ static int be_get_resources(struct be_adapter *adapter)
 
 	dev_info(dev, "Max: txqs %d, rxqs %d, rss %d, eqs %d, vfs %d\n",
 		 be_max_txqs(adapter), be_max_rxqs(adapter),
-		 be_max_rss(adapter), be_max_eqs(adapter),
+		 be_max_rss(adapter), be_max_nic_eqs(adapter),
 		 be_max_vfs(adapter));
 	dev_info(dev, "Max: uc-macs %d, mc-macs %d, vlans %d\n",
 		 be_max_uc(adapter), be_max_mc(adapter),
-- 
2.4.1

[net-next PATCH 2/5] be2net: support asymmetric rx/tx queue counts

[Sathya Perla]

be2net so far supported creation of RX/TX queues only in pairs.
On configs where rx and tx queue counts are different, creation of only
the lesser number of queues has been supported.

This patch now allows a combination of RX/TX-only channels along with
combined channels. N TX-queues and M RX-queues can be created with the
following cmds:
ethtool -L ethX combined N rx M-N  (when N < M)
ethtool -L ethX combined M tx N-M (when M < N)

Setting both RX-only and TX-only channels is still not supported.
It is mandatory to create atleast one combined channel.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
---
 drivers/net/ethernet/emulex/benet/be.h         | 32 ++++++++++++++++++----
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 29 ++++++++++++++++----
 drivers/net/ethernet/emulex/benet/be_main.c    | 38 ++++++++++++++++----------
 3 files changed, 74 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index f8040ef..096cb1f5 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -526,7 +526,8 @@ struct be_adapter {
 	spinlock_t mcc_lock;	/* For serializing mcc cmds to BE card */
 	spinlock_t mcc_cq_lock;
 
-	u16 cfg_num_qs;		/* configured via set-channels */
+	u16 cfg_num_rx_irqs;		/* configured via set-channels */
+	u16 cfg_num_tx_irqs;		/* configured via set-channels */
 	u16 num_evt_qs;
 	u16 num_msix_vec;
 	struct be_eq_obj eq_obj[MAX_EVT_QS];
@@ -652,14 +653,35 @@ struct be_adapter {
 #define be_if_cap_flags(adapter)	(adapter->res.if_cap_flags)
 #define be_max_pf_pool_rss_tables(adapter)	\
 				(adapter->pool_res.max_rss_tables)
+/* Max irqs avaialble for NIC */
+#define be_max_irqs(adapter)		\
+			(min_t(u16, be_max_nic_eqs(adapter), num_online_cpus()))
 
-static inline u16 be_max_qs(struct be_adapter *adapter)
+/* Max irqs *needed* for RX queues */
+static inline u16 be_max_rx_irqs(struct be_adapter *adapter)
 {
-	/* If no RSS, need atleast the one def RXQ */
+	/* If no RSS, need atleast one irq for def-RXQ */
 	u16 num = max_t(u16, be_max_rss(adapter), 1);
 
-	num = min(num, be_max_nic_eqs(adapter));
-	return min_t(u16, num, num_online_cpus());
+	return min_t(u16, num, be_max_irqs(adapter));
+}
+
+/* Max irqs *needed* for TX queues */
+static inline u16 be_max_tx_irqs(struct be_adapter *adapter)
+{
+	return min_t(u16, be_max_txqs(adapter), be_max_irqs(adapter));
+}
+
+/* Max irqs *needed* for combined queues */
+static inline u16 be_max_qp_irqs(struct be_adapter *adapter)
+{
+	return min(be_max_tx_irqs(adapter), be_max_rx_irqs(adapter));
+}
+
+/* Max irqs *needed* for RX and TX queues together */
+static inline u16 be_max_any_irqs(struct be_adapter *adapter)
+{
+	return max(be_max_tx_irqs(adapter), be_max_rx_irqs(adapter));
 }
 
 /* Is BE in pvid_tagging mode */
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index c569cd7..71940b9 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1196,9 +1196,17 @@ static void be_get_channels(struct net_device *netdev,
 			    struct ethtool_channels *ch)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
+	u16 num_rx_irqs = max_t(u16, adapter->num_rss_qs, 1);
 
-	ch->combined_count = adapter->num_evt_qs;
-	ch->max_combined = be_max_qs(adapter);
+	/* num_tx_qs is always same as the number of irqs used for TX */
+	ch->combined_count = min(adapter->num_tx_qs, num_rx_irqs);
+	ch->rx_count = num_rx_irqs - ch->combined_count;
+	ch->tx_count = adapter->num_tx_qs - ch->combined_count;
+
+	ch->max_combined = be_max_qp_irqs(adapter);
+	/* The user must create atleast one combined channel */
+	ch->max_rx = be_max_rx_irqs(adapter) - 1;
+	ch->max_tx = be_max_tx_irqs(adapter) - 1;
 }
 
 static int be_set_channels(struct net_device  *netdev,
@@ -1207,11 +1215,22 @@ static int be_set_channels(struct net_device  *netdev,
 	struct be_adapter *adapter = netdev_priv(netdev);
 	int status;
 
-	if (ch->rx_count || ch->tx_count || ch->other_count ||
-	    !ch->combined_count || ch->combined_count > be_max_qs(adapter))
+	/* we support either only combined channels or a combination of
+	 * combined and either RX-only or TX-only channels.
+	 */
+	if (ch->other_count || !ch->combined_count ||
+	    (ch->rx_count && ch->tx_count))
+		return -EINVAL;
+
+	if (ch->combined_count > be_max_qp_irqs(adapter) ||
+	    (ch->rx_count &&
+	     (ch->rx_count + ch->combined_count) > be_max_rx_irqs(adapter)) ||
+	    (ch->tx_count &&
+	     (ch->tx_count + ch->combined_count) > be_max_tx_irqs(adapter)))
 		return -EINVAL;
 
-	adapter->cfg_num_qs = ch->combined_count;
+	adapter->cfg_num_rx_irqs = ch->combined_count + ch->rx_count;
+	adapter->cfg_num_tx_irqs = ch->combined_count + ch->tx_count;
 
 	status = be_update_queues(adapter);
 	return be_cmd_status(status);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index c67830f..a654c12 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2620,8 +2620,10 @@ static int be_evt_queues_create(struct be_adapter *adapter)
 	struct be_aic_obj *aic;
 	int i, rc;
 
+	/* need enough EQs to service both RX and TX queues */
 	adapter->num_evt_qs = min_t(u16, num_irqs(adapter),
-				    adapter->cfg_num_qs);
+				    max(adapter->cfg_num_rx_irqs,
+					adapter->cfg_num_tx_irqs));
 
 	for_all_evt_queues(adapter, eqo, i) {
 		int numa_node = dev_to_node(&adapter->pdev->dev);
@@ -2726,7 +2728,7 @@ static int be_tx_qs_create(struct be_adapter *adapter)
 	struct be_eq_obj *eqo;
 	int status, i;
 
-	adapter->num_tx_qs = min(adapter->num_evt_qs, be_max_txqs(adapter));
+	adapter->num_tx_qs = min(adapter->num_evt_qs, adapter->cfg_num_tx_irqs);
 
 	for_all_tx_queues(adapter, txo, i) {
 		cq = &txo->cq;
@@ -2784,11 +2786,11 @@ static int be_rx_cqs_create(struct be_adapter *adapter)
 	struct be_rx_obj *rxo;
 	int rc, i;
 
-	/* We can create as many RSS rings as there are EQs. */
-	adapter->num_rss_qs = adapter->num_evt_qs;
+	adapter->num_rss_qs =
+			min(adapter->num_evt_qs, adapter->cfg_num_rx_irqs);
 
 	/* We'll use RSS only if atleast 2 RSS rings are supported. */
-	if (adapter->num_rss_qs <= 1)
+	if (adapter->num_rss_qs < 2)
 		adapter->num_rss_qs = 0;
 
 	adapter->num_rx_qs = adapter->num_rss_qs + adapter->need_def_rxq;
@@ -3249,18 +3251,22 @@ static void be_msix_disable(struct be_adapter *adapter)
 
 static int be_msix_enable(struct be_adapter *adapter)
 {
-	int i, num_vec;
+	unsigned int i, num_vec, max_roce_eqs;
 	struct device *dev = &adapter->pdev->dev;
 
 	/* If RoCE is supported, program the max number of vectors that
 	 * could be used for NIC and RoCE, else, just program the number
 	 * we'll use initially.
 	 */
-	if (be_roce_supported(adapter))
-		num_vec = min_t(int, be_max_func_eqs(adapter),
-				2 * num_online_cpus());
-	else
-		num_vec = adapter->cfg_num_qs;
+	if (be_roce_supported(adapter)) {
+		max_roce_eqs =
+			be_max_func_eqs(adapter) - be_max_nic_eqs(adapter);
+		max_roce_eqs = min(max_roce_eqs, num_online_cpus());
+		num_vec = be_max_any_irqs(adapter) + max_roce_eqs;
+	} else {
+		num_vec = max(adapter->cfg_num_rx_irqs,
+			      adapter->cfg_num_tx_irqs);
+	}
 
 	for (i = 0; i < num_vec; i++)
 		adapter->msix_entries[i].entry = i;
@@ -4255,9 +4261,11 @@ static int be_get_resources(struct be_adapter *adapter)
 		 be_max_uc(adapter), be_max_mc(adapter),
 		 be_max_vlans(adapter));
 
-	/* Sanitize cfg_num_qs based on HW and platform limits */
-	adapter->cfg_num_qs = min_t(u16, netif_get_num_default_rss_queues(),
-				    be_max_qs(adapter));
+	/* Ensure RX and TX queues are created in pairs at init time */
+	adapter->cfg_num_rx_irqs =
+				min_t(u16, netif_get_num_default_rss_queues(),
+				      be_max_qp_irqs(adapter));
+	adapter->cfg_num_tx_irqs = adapter->cfg_num_rx_irqs;
 	return 0;
 }
 
@@ -4370,7 +4378,7 @@ static int be_if_create(struct be_adapter *adapter)
 	u32 cap_flags = be_if_cap_flags(adapter);
 	int status;
 
-	if (adapter->cfg_num_qs == 1)
+	if (adapter->cfg_num_rx_irqs == 1)
 		cap_flags &= ~(BE_IF_FLAGS_DEFQ_RSS | BE_IF_FLAGS_RSS);
 
 	en_flags &= cap_flags;
-- 
2.4.1

[net-next PATCH 3/5] be2net: Fix broadcast echoes from EVB in BE3

[Sathya Perla]

From: Somnath Kotur <somnath.kotur@emulex.com>

On SR-IOV profiles, when the user connects a Linux Bridge or OVS to a BE3
vport, they suffer the "broadcast/multicast echo" problem. BE3 EVB echoes
broadcast and multicast packets back to PF's vport confusing the
Linux bridge.  BE3 relies on the src-mac addr being programmed on the
interface to avoid sending back an echo of a broadcast or multicast packet
on a vPort. When a Linux bridge is connected to a BE3, the mac-addr of the
VM behind the bridge doesn't get configured on the vPort and so echo
cancellation doesn't work.
This patch worksaround this problem by disabling the EVB initially
and re-enabling it *only* when SR-IOV is enabled by the user. For the
driver fix to work, the BE3 FW version must be >= 11.1.84.0.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 11 ++++++++++-
 drivers/net/ethernet/emulex/benet/be_main.c | 23 +++++++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 29aeb91..a98b6ab 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -87,6 +87,11 @@ static struct be_cmd_priv_map cmd_priv_map[] = {
 		CMD_SUBSYSTEM_LOWLEVEL,
 		BE_PRIV_DEVCFG | BE_PRIV_DEVSEC
 	},
+	{
+		OPCODE_COMMON_SET_HSW_CONFIG,
+		CMD_SUBSYSTEM_COMMON,
+		BE_PRIV_DEVCFG | BE_PRIV_VHADM
+	},
 };
 
 static bool be_cmd_allowed(struct be_adapter *adapter, u8 opcode, u8 subsystem)
@@ -3850,6 +3855,10 @@ int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid,
 	void *ctxt;
 	int status;
 
+	if (!be_cmd_allowed(adapter, OPCODE_COMMON_SET_HSW_CONFIG,
+			    CMD_SUBSYSTEM_COMMON))
+		return -EPERM;
+
 	spin_lock_bh(&adapter->mcc_lock);
 
 	wrb = wrb_from_mccq(adapter);
@@ -3871,7 +3880,7 @@ int be_cmd_set_hsw_config(struct be_adapter *adapter, u16 pvid,
 		AMAP_SET_BITS(struct amap_set_hsw_context, pvid_valid, ctxt, 1);
 		AMAP_SET_BITS(struct amap_set_hsw_context, pvid, ctxt, pvid);
 	}
-	if (!BEx_chip(adapter) && hsw_mode) {
+	if (hsw_mode) {
 		AMAP_SET_BITS(struct amap_set_hsw_context, interface_id,
 			      ctxt, adapter->hba_port_num);
 		AMAP_SET_BITS(struct amap_set_hsw_context, pport, ctxt, 1);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index a654c12..f11a19b 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3729,6 +3729,11 @@ static void be_vf_clear(struct be_adapter *adapter)
 
 		be_cmd_if_destroy(adapter, vf_cfg->if_handle, vf + 1);
 	}
+
+	if (BE3_chip(adapter))
+		be_cmd_set_hsw_config(adapter, 0, 0,
+				      adapter->if_handle,
+				      PORT_FWD_TYPE_PASSTHRU, 0);
 done:
 	kfree(adapter->vf_cfg);
 	adapter->num_vfs = 0;
@@ -4019,6 +4024,15 @@ static int be_vf_setup(struct be_adapter *adapter)
 		}
 	}
 
+	if (BE3_chip(adapter)) {
+		/* On BE3, enable VEB only when SRIOV is enabled */
+		status = be_cmd_set_hsw_config(adapter, 0, 0,
+					       adapter->if_handle,
+					       PORT_FWD_TYPE_VEB, 0);
+		if (status)
+			goto err;
+	}
+
 	adapter->flags |= BE_FLAGS_SRIOV_ENABLED;
 	return 0;
 err:
@@ -4564,6 +4578,15 @@ static int be_setup(struct be_adapter *adapter)
 		be_cmd_set_logical_link_config(adapter,
 					       IFLA_VF_LINK_STATE_AUTO, 0);
 
+	/* BE3 EVB echoes broadcast/multicast packets back to PF's vport
+	 * confusing a linux bridge or OVS that it might be connected to.
+	 * Set the EVB to PASSTHRU mode which effectively disables the EVB
+	 * when SRIOV is not enabled.
+	 */
+	if (BE3_chip(adapter))
+		be_cmd_set_hsw_config(adapter, 0, 0, adapter->if_handle,
+				      PORT_FWD_TYPE_PASSTHRU, 0);
+
 	if (adapter->num_vfs)
 		be_vf_setup(adapter);
 
-- 
2.4.1

[net-next PATCH 4/5] be2net: Change copyright markings in source files

[Sathya Perla]

From: Somnath Kotur <somnath.kotur@emulex.com>

This patch updates year and company name in the copyright markings in the
be2net source files.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
---
 drivers/net/ethernet/emulex/benet/be.h         | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_cmds.h    | 2 +-
 drivers/net/ethernet/emulex/benet/be_ethtool.c | 2 +-
 drivers/net/ethernet/emulex/benet/be_main.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.c    | 2 +-
 drivers/net/ethernet/emulex/benet/be_roce.h    | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 096cb1f5..4555e04 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index a98b6ab..2cc1175 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index cb96ddd..0d6be22 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_ethtool.c b/drivers/net/ethernet/emulex/benet/be_ethtool.c
index 71940b9..50e7be5 100644
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index f11a19b..1873c74 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.c b/drivers/net/ethernet/emulex/benet/be_roce.c
index 4089156..2b62841 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.c
+++ b/drivers/net/ethernet/emulex/benet/be_roce.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/net/ethernet/emulex/benet/be_roce.h b/drivers/net/ethernet/emulex/benet/be_roce.h
index fde6097..e51719a 100644
--- a/drivers/net/ethernet/emulex/benet/be_roce.h
+++ b/drivers/net/ethernet/emulex/benet/be_roce.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005 - 2015 Emulex
+ * Copyright (C) 2005 - 2016 Broadcom
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or
-- 
2.4.1

[net-next PATCH 5/5] be2net: update be2net maintainers list

[Sathya Perla]

This patch removes Padmanabh's name from the maintainers list as he's no
longer with the company. It also adds the driver name on the headline to
make it easy to lookup the maintainers list by the driver name.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
---
 MAINTAINERS | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 50f69ba..cab9975 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10280,10 +10280,9 @@ W:	http://www.avagotech.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
-Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER (be2net)
 M:	Sathya Perla <sathya.perla@broadcom.com>
 M:	Ajit Khaparde <ajit.khaparde@broadcom.com>
-M:	Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
 M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
 M:	Somnath Kotur <somnath.kotur@broadcom.com>
 L:	netdev@vger.kernel.org
-- 
2.4.1

Re: [net-next PATCH 0/5] be2net: patch set

[David Miller]

From: Sathya Perla <sathya.perla@broadcom.com>
Date: Wed, 22 Jun 2016 08:54:52 -0400

> Hi Dave, pls consider commiting the following patches to the net-next tree.
> Thanks!
> 
> Patch 1 replaces the be_max_eqs() macro with two new macros called
> be_max_nic_eqs() and be_max_func_eqs() to clear confusion in that part
> of the code.
> 
> Patch 2 adds support to configure asymmetric number of rx/tx queues via
> ethtool set-channels option.
> 
> Patch 3 disables EVB when VFs are not enabled on a BE3 SR-IOV config to
> avoid the broadcast echo problem.
> 
> Patch 4 updates copyright markings in be2net src files
> 
> Patch 5 updates the be2net maintainers' list

Series applied, thanks.