From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jacob Keller <jacob.e.keller@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 09/15] igb: re-use igb_ptp_reset in igb_ptp_init
Date: Wed, 29 Jun 2016 14:32:56 -0700 [thread overview]
Message-ID: <1467235982-55437-10-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1467235982-55437-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jacob Keller <jacob.e.keller@intel.com>
Modify igb_ptp_init to take advantage of igb_ptp_reset, and remove
duplicated work that was occurring in both igb_ptp_reset and
igb_ptp_init.
In total, resetting the TSAUXC register, and resetting the system time
both happen in igb_ptp_reset already. igb_ptp_reset now also takes care
of starting the delayed work item for overflow checks, as well.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/igb_main.c | 3 +-
drivers/net/ethernet/intel/igb/igb_ptp.c | 48 +++++++++++--------------------
2 files changed, 18 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index ef3d642..750a5d8 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2027,7 +2027,8 @@ void igb_reset(struct igb_adapter *adapter)
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
/* Re-enable PTP, where applicable. */
- igb_ptp_reset(adapter);
+ if (adapter->ptp_flags & IGB_PTP_ENABLED)
+ igb_ptp_reset(adapter);
igb_get_phy_info(hw);
}
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 88d367d..907c225 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -1043,6 +1043,13 @@ int igb_ptp_set_ts_config(struct net_device *netdev, struct ifreq *ifr)
-EFAULT : 0;
}
+/**
+ * igb_ptp_init - Initialize PTP functionality
+ * @adapter: Board private structure
+ *
+ * This function is called at device probe to initialize the PTP
+ * functionality.
+ */
void igb_ptp_init(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@@ -1065,8 +1072,6 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->cc.mask = CYCLECOUNTER_MASK(64);
adapter->cc.mult = 1;
adapter->cc.shift = IGB_82576_TSYNC_SHIFT;
- /* Dial the nominal frequency. */
- wr32(E1000_TIMINCA, INCPERIOD_82576 | INCVALUE_82576);
adapter->ptp_flags |= IGB_PTP_OVERFLOW_CHECK;
break;
case e1000_82580:
@@ -1086,8 +1091,6 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->cc.mask = CYCLECOUNTER_MASK(IGB_NBITS_82580);
adapter->cc.mult = 1;
adapter->cc.shift = 0;
- /* Enable the timer functions by clearing bit 31. */
- wr32(E1000_TSAUXC, 0x0);
adapter->ptp_flags |= IGB_PTP_OVERFLOW_CHECK;
break;
case e1000_i210:
@@ -1113,46 +1116,24 @@ void igb_ptp_init(struct igb_adapter *adapter)
adapter->ptp_caps.settime64 = igb_ptp_settime_i210;
adapter->ptp_caps.enable = igb_ptp_feature_enable_i210;
adapter->ptp_caps.verify = igb_ptp_verify_pin;
- /* Enable the timer functions by clearing bit 31. */
- wr32(E1000_TSAUXC, 0x0);
break;
default:
adapter->ptp_clock = NULL;
return;
}
- wrfl();
-
spin_lock_init(&adapter->tmreg_lock);
INIT_WORK(&adapter->ptp_tx_work, igb_ptp_tx_work);
- /* Initialize the clock and overflow work for devices that need it. */
- if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211)) {
- struct timespec64 ts = ktime_to_timespec64(ktime_get_real());
-
- igb_ptp_settime_i210(&adapter->ptp_caps, &ts);
- } else {
- timecounter_init(&adapter->tc, &adapter->cc,
- ktime_to_ns(ktime_get_real()));
- }
-
- if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK) {
+ if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK)
INIT_DELAYED_WORK(&adapter->ptp_overflow_work,
igb_ptp_overflow_check);
- schedule_delayed_work(&adapter->ptp_overflow_work,
- IGB_SYSTIM_OVERFLOW_PERIOD);
- }
-
- /* Initialize the time sync interrupts for devices that support it. */
- if (hw->mac.type >= e1000_82580) {
- wr32(E1000_TSIM, TSYNC_INTERRUPTS);
- wr32(E1000_IMS, E1000_IMS_TS);
- }
-
adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
+ igb_ptp_reset(adapter);
+
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
&adapter->pdev->dev);
if (IS_ERR(adapter->ptp_clock)) {
@@ -1205,9 +1186,6 @@ void igb_ptp_reset(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
unsigned long flags;
- if (!(adapter->ptp_flags & IGB_PTP_ENABLED))
- return;
-
/* reset the tstamp_config */
igb_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
@@ -1244,4 +1222,10 @@ void igb_ptp_reset(struct igb_adapter *adapter)
}
out:
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
+
+ wrfl();
+
+ if (adapter->ptp_flags & IGB_PTP_OVERFLOW_CHECK)
+ schedule_delayed_work(&adapter->ptp_overflow_work,
+ IGB_SYSTIM_OVERFLOW_PERIOD);
}
--
2.5.5
next prev parent reply other threads:[~2016-06-29 21:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-29 21:32 [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2016-06-29 Jeff Kirsher
2016-06-29 21:32 ` [net-next 01/15] fm10k: don't use BIT() macro where the value isn't a bitmask Jeff Kirsher
2016-06-29 21:32 ` [net-next 02/15] fm10k: Align Rx buffers to 512B blocks Jeff Kirsher
2016-06-29 21:32 ` [net-next 03/15] fm10k: fix incorrect index calculation in fm10k_write_reta Jeff Kirsher
2016-06-29 21:32 ` [net-next 04/15] e1000e: prevent division by zero if TIMINCA is zero Jeff Kirsher
2016-06-29 21:32 ` [net-next 05/15] ixgbe: Fix deleting link filters for cls_u32 offloads Jeff Kirsher
2016-06-29 21:32 ` [net-next 06/15] ixgbe: Error handler for duplicate filter locations in hardware " Jeff Kirsher
2016-06-29 21:32 ` [net-next 07/15] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP Jeff Kirsher
2016-06-29 21:32 ` [net-next 08/15] igb: introduce IGB_PTP_OVERFLOW_CHECK flag Jeff Kirsher
2016-06-29 21:32 ` Jeff Kirsher [this message]
2016-06-29 21:32 ` [net-next 10/15] igb: implement igb_ptp_suspend Jeff Kirsher
2016-06-29 21:32 ` [net-next 11/15] igb: call igb_ptp_suspend during suspend/resume cycle Jeff Kirsher
2016-06-29 21:32 ` [net-next 12/15] fm10k: Remove create_workqueue Jeff Kirsher
2016-06-29 21:33 ` [net-next 13/15] ixgbe: Correct reporting of timestamping for x550 Jeff Kirsher
2016-06-29 21:33 ` [net-next 14/15] ixgbe: fix spoofed packets with macvlans Jeff Kirsher
2016-06-29 21:33 ` [net-next 15/15] igb: Only DMA sync frame length Jeff Kirsher
2016-06-30 13:29 ` [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2016-06-29 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467235982-55437-10-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=jacob.e.keller@intel.com \
--cc=jogreene@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).