netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jacob Keller <jacob.e.keller@intel.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jogreene@redhat.com, Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 07/15] igb: introduce ptp_flags variable and use it to replace IGB_FLAG_PTP
Date: Wed, 29 Jun 2016 14:32:54 -0700	[thread overview]
Message-ID: <1467235982-55437-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1467235982-55437-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Jacob Keller <jacob.e.keller@intel.com>

Upcoming patches will introduce new PTP specific flags. To avoid
cluttering the normal flags variable, introduce PTP specific "ptp_flags"
variable for this purpose, and move IGB_FLAG_PTP to become
IGB_PTP_ENABLED.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb.h     | 5 ++++-
 drivers/net/ethernet/intel/igb/igb_ptp.c | 7 ++++---
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index b9609af..1e18a9e 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -445,6 +445,7 @@ struct igb_adapter {
 	unsigned long ptp_tx_start;
 	unsigned long last_rx_ptp_check;
 	unsigned long last_rx_timestamp;
+	unsigned int ptp_flags;
 	spinlock_t tmreg_lock;
 	struct cyclecounter cc;
 	struct timecounter tc;
@@ -474,12 +475,14 @@ struct igb_adapter {
 	u16 eee_advert;
 };
 
+/* flags controlling PTP/1588 function */
+#define IGB_PTP_ENABLED		BIT(0)
+
 #define IGB_FLAG_HAS_MSI		BIT(0)
 #define IGB_FLAG_DCA_ENABLED		BIT(1)
 #define IGB_FLAG_QUAD_PORT_A		BIT(2)
 #define IGB_FLAG_QUEUE_PAIRS		BIT(3)
 #define IGB_FLAG_DMAC			BIT(4)
-#define IGB_FLAG_PTP			BIT(5)
 #define IGB_FLAG_RSS_FIELD_IPV4_UDP	BIT(6)
 #define IGB_FLAG_RSS_FIELD_IPV6_UDP	BIT(7)
 #define IGB_FLAG_WOL_SUPPORTED		BIT(8)
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index f097c5a..504102b 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -684,6 +684,7 @@ void igb_ptp_rx_hang(struct igb_adapter *adapter)
 	u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
 	unsigned long rx_event;
 
+	/* Other hardware uses per-packet timestamps */
 	if (hw->mac.type != e1000_82576)
 		return;
 
@@ -1156,7 +1157,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
 	} else {
 		dev_info(&adapter->pdev->dev, "added PHC on %s\n",
 			 adapter->netdev->name);
-		adapter->flags |= IGB_FLAG_PTP;
+		adapter->ptp_flags |= IGB_PTP_ENABLED;
 	}
 }
 
@@ -1194,7 +1195,7 @@ void igb_ptp_stop(struct igb_adapter *adapter)
 		ptp_clock_unregister(adapter->ptp_clock);
 		dev_info(&adapter->pdev->dev, "removed PHC on %s\n",
 			 adapter->netdev->name);
-		adapter->flags &= ~IGB_FLAG_PTP;
+		adapter->ptp_flags &= ~IGB_PTP_ENABLED;
 	}
 }
 
@@ -1209,7 +1210,7 @@ void igb_ptp_reset(struct igb_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned long flags;
 
-	if (!(adapter->flags & IGB_FLAG_PTP))
+	if (!(adapter->ptp_flags & IGB_PTP_ENABLED))
 		return;
 
 	/* reset the tstamp_config */
-- 
2.5.5

  parent reply	other threads:[~2016-06-29 21:33 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-29 21:32 [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2016-06-29 Jeff Kirsher
2016-06-29 21:32 ` [net-next 01/15] fm10k: don't use BIT() macro where the value isn't a bitmask Jeff Kirsher
2016-06-29 21:32 ` [net-next 02/15] fm10k: Align Rx buffers to 512B blocks Jeff Kirsher
2016-06-29 21:32 ` [net-next 03/15] fm10k: fix incorrect index calculation in fm10k_write_reta Jeff Kirsher
2016-06-29 21:32 ` [net-next 04/15] e1000e: prevent division by zero if TIMINCA is zero Jeff Kirsher
2016-06-29 21:32 ` [net-next 05/15] ixgbe: Fix deleting link filters for cls_u32 offloads Jeff Kirsher
2016-06-29 21:32 ` [net-next 06/15] ixgbe: Error handler for duplicate filter locations in hardware " Jeff Kirsher
2016-06-29 21:32 ` Jeff Kirsher [this message]
2016-06-29 21:32 ` [net-next 08/15] igb: introduce IGB_PTP_OVERFLOW_CHECK flag Jeff Kirsher
2016-06-29 21:32 ` [net-next 09/15] igb: re-use igb_ptp_reset in igb_ptp_init Jeff Kirsher
2016-06-29 21:32 ` [net-next 10/15] igb: implement igb_ptp_suspend Jeff Kirsher
2016-06-29 21:32 ` [net-next 11/15] igb: call igb_ptp_suspend during suspend/resume cycle Jeff Kirsher
2016-06-29 21:32 ` [net-next 12/15] fm10k: Remove create_workqueue Jeff Kirsher
2016-06-29 21:33 ` [net-next 13/15] ixgbe: Correct reporting of timestamping for x550 Jeff Kirsher
2016-06-29 21:33 ` [net-next 14/15] ixgbe: fix spoofed packets with macvlans Jeff Kirsher
2016-06-29 21:33 ` [net-next 15/15] igb: Only DMA sync frame length Jeff Kirsher
2016-06-30 13:29 ` [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2016-06-29 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467235982-55437-8-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=jacob.e.keller@intel.com \
    --cc=jogreene@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).