From: Kedareswara rao Appana <appana.durga.rao@xilinx.com>
To: <appanad@xilinx.com>, <michal.simek@xilinx.com>,
<nicolas.ferre@atmel.com>, <punnaia@xilinx.com>,
<anirudh@xilinx.com>, <harinik@xilinx.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH 2/2] net: macb: Add gmii2rgmii phy converter support
Date: Fri, 1 Jul 2016 11:50:12 +0530 [thread overview]
Message-ID: <1467354012-7364-3-git-send-email-appanad@xilinx.com> (raw)
In-Reply-To: <1467354012-7364-1-git-send-email-appanad@xilinx.com>
This patch adds support for gmii2rgmii phy converter
in the macb driver.
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
drivers/net/ethernet/cadence/macb.c | 21 ++++++++++++++++++++-
drivers/net/ethernet/cadence/macb.h | 3 +++
2 files changed, 23 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index cb07d95..de0ad71 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -257,6 +257,14 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
return 0;
}
+static inline void macb_hw_fix_mac_speed(struct macb *bp,
+ struct phy_device *phydev)
+{
+ if (likely(bp->converter_phy.fix_mac_speed))
+ bp->converter_phy.fix_mac_speed(&bp->converter_phy,
+ phydev->speed);
+}
+
/**
* macb_set_tx_clk() - Set a clock to a new frequency
* @clk Pointer to the clock to change
@@ -329,6 +337,7 @@ static void macb_handle_link_change(struct net_device *dev)
reg |= GEM_BIT(GBE);
macb_or_gem_writel(bp, NCFGR, reg);
+ macb_hw_fix_mac_speed(bp, phydev);
bp->speed = phydev->speed;
bp->duplex = phydev->duplex;
@@ -2884,7 +2893,7 @@ static int macb_probe(struct platform_device *pdev)
struct clk **, struct clk **)
= macb_clk_init;
int (*init)(struct platform_device *) = macb_init;
- struct device_node *np = pdev->dev.of_node;
+ struct device_node *np = pdev->dev.of_node, *np1, *np11;
struct device_node *phy_node;
const struct macb_config *macb_config = NULL;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL;
@@ -3011,6 +3020,16 @@ static int macb_probe(struct platform_device *pdev)
goto err_out_free_netdev;
phydev = bp->phy_dev;
+ np1 = of_get_next_child(np, NULL);
+ for_each_child_of_node(np1, np11) {
+ if (of_device_is_compatible(np11, "xlnx,gmiitorgmii")) {
+ bp->converter_phy.dev = dev;
+ bp->converter_phy.mii_bus = bp->mii_bus;
+ bp->converter_phy.mdio_write = macb_mdio_write;
+ bp->converter_phy.platform_data = bp->pdev->dev.of_node;
+ gmii2rgmii_phyprobe(&bp->converter_phy);
+ }
+ }
netif_carrier_off(dev);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 8a13824..735bce2 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -10,6 +10,8 @@
#ifndef _MACB_H
#define _MACB_H
+#include <linux/xilinx_gmii2rgmii.h>
+
#define MACB_GREGS_NBR 16
#define MACB_GREGS_VERSION 2
#define MACB_MAX_QUEUES 8
@@ -846,6 +848,7 @@ struct macb {
unsigned int jumbo_max_len;
u32 wol;
+ struct gmii2rgmii converter_phy;
};
static inline bool macb_is_gem(struct macb *bp)
--
1.7.1
next prev parent reply other threads:[~2016-07-01 6:20 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-01 6:20 [RFC PATCH 0/2] net: ethernet: Add support for gmii2rgmii converter Kedareswara rao Appana
2016-07-01 6:20 ` [RFC PATCH 1/2] net: ethernet: xilinx: Add gmii2rgmii converter support Kedareswara rao Appana
2016-07-01 15:00 ` Florian Fainelli
2016-07-01 15:21 ` Appana Durga Kedareswara Rao
2016-07-01 6:20 ` Kedareswara rao Appana [this message]
2016-07-01 7:45 ` [RFC PATCH 2/2] net: macb: Add gmii2rgmii phy " Nicolas Ferre
2016-07-01 9:02 ` Appana Durga Kedareswara Rao
2016-07-01 13:03 ` Nicolas Ferre
2016-07-01 13:07 ` Appana Durga Kedareswara Rao
2016-07-01 15:04 ` [RFC PATCH 0/2] net: ethernet: Add support for gmii2rgmii converter Florian Fainelli
2016-07-01 15:21 ` Appana Durga Kedareswara Rao
2016-07-01 15:13 ` Andrew Lunn
2016-07-01 15:29 ` Appana Durga Kedareswara Rao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467354012-7364-3-git-send-email-appanad@xilinx.com \
--to=appana.durga.rao@xilinx.com \
--cc=anirudh@xilinx.com \
--cc=appanad@xilinx.com \
--cc=harinik@xilinx.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=punnaia@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).