From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, yotamg@mellanox.com,
eladr@mellanox.com, nogahf@mellanox.com, ogerlitz@mellanox.com,
sfeldma@gmail.com, roopa@cumulusnetworks.com, andy@greyhouse.net,
dsa@cumulusnetworks.com, tgraf@suug.ch, jhs@mojatatu.com,
linville@tuxdriver.com, ivecera@redhat.com
Subject: [patch net-next 15/42] mlxsw: spectrum: Add traps needed for router implementation
Date: Fri, 1 Jul 2016 16:04:43 +0200 [thread overview]
Message-ID: <1467381910-3445-16-git-send-email-jiri@resnulli.us> (raw)
In-Reply-To: <1467381910-3445-1-git-send-email-jiri@resnulli.us>
From: Jiri Pirko <jiri@mellanox.com>
ip2me:
To instruct HW to send trapped ip2me traffic to kernel, we have to add
this trap. Selection ip2me traffic is introduced later on in this set.
ARPs:
We are going to stop flooding to CPU port when netdev isn't bridged and
only get packets destined to the netdev's IP address and certain control
packets.
Add traps for ARP request (broadcast) and response (unicast) in order to
get these to the CPU and resolve neighbours.
host miss:
If a packet is routed through a directly connected route and its
destination IP is not in the device's neighbour table, then we need to
trap it to CPU. This will cause the host to resolve the MAC of the
neighbour, which will be eventually programmed to the device's table.
router ingress:
In order to trap packets in router part.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 25 +++++++++++++++++++++++++
drivers/net/ethernet/mellanox/mlxsw/trap.h | 5 +++++
2 files changed, 30 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index de30763..f0799898 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2255,6 +2255,31 @@ static const struct mlxsw_rx_listener mlxsw_sp_rx_listener[] = {
.local_port = MLXSW_PORT_DONT_CARE,
.trap_id = MLXSW_TRAP_ID_IGMP_V3_REPORT,
},
+ {
+ .func = mlxsw_sp_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_ARPBC,
+ },
+ {
+ .func = mlxsw_sp_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_ARPUC,
+ },
+ {
+ .func = mlxsw_sp_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_IP2ME,
+ },
+ {
+ .func = mlxsw_sp_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_RTR_INGRESS0,
+ },
+ {
+ .func = mlxsw_sp_rx_listener_func,
+ .local_port = MLXSW_PORT_DONT_CARE,
+ .trap_id = MLXSW_TRAP_ID_HOST_MISS_IPV4,
+ },
};
static int mlxsw_sp_traps_init(struct mlxsw_sp *mlxsw_sp)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/trap.h b/drivers/net/ethernet/mellanox/mlxsw/trap.h
index 53a9550..470d769 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/trap.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/trap.h
@@ -54,6 +54,11 @@ enum {
MLXSW_TRAP_ID_IGMP_V2_REPORT = 0x32,
MLXSW_TRAP_ID_IGMP_V2_LEAVE = 0x33,
MLXSW_TRAP_ID_IGMP_V3_REPORT = 0x34,
+ MLXSW_TRAP_ID_ARPBC = 0x50,
+ MLXSW_TRAP_ID_ARPUC = 0x51,
+ MLXSW_TRAP_ID_IP2ME = 0x5F,
+ MLXSW_TRAP_ID_RTR_INGRESS0 = 0x70,
+ MLXSW_TRAP_ID_HOST_MISS_IPV4 = 0x90,
MLXSW_TRAP_ID_MAX = 0x1FF
};
--
2.5.5
next prev parent reply other threads:[~2016-07-01 14:18 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-01 14:04 [patch net-next 00/42] mlxsw: Implement IPV4 unicast routing Jiri Pirko
2016-07-01 14:04 ` [patch net-next 01/42] net: add dev arg to ndo_neigh_construct/destroy Jiri Pirko
2016-07-01 14:04 ` [patch net-next 02/42] net: introduce default neigh_construct/destroy ndo calls for L2 upper devices Jiri Pirko
2016-07-01 14:24 ` David Ahern
2016-07-02 7:28 ` Jiri Pirko
2016-07-01 14:04 ` [patch net-next 03/42] neigh: Send a notification when DELAY_PROBE_TIME changes Jiri Pirko
2016-07-01 14:04 ` [patch net-next 04/42] mlxsw: spectrum: Send untagged packets through a port netdev Jiri Pirko
2016-07-01 14:04 ` [patch net-next 05/42] mlxsw: spectrum: Remove VLANs configuration via SELF flag Jiri Pirko
2016-07-01 14:04 ` [patch net-next 06/42] mlxsw: spectrum: Sync PVID vPort LAG status Jiri Pirko
2016-07-01 14:04 ` [patch net-next 07/42] mlxsw: spectrum: Remove RIF from PVID vPort when joining / leaving LAG Jiri Pirko
2016-07-01 14:04 ` [patch net-next 08/42] mlxsw: reg: Add Router General Configuration Register Jiri Pirko
2016-07-01 14:04 ` [patch net-next 09/42] mlxsw: spectrum: Initialize ports at the end of init sequence Jiri Pirko
2016-07-01 14:04 ` [patch net-next 10/42] mlxsw: spectrum_router: Add basic ipv4 router initialization Jiri Pirko
2016-07-01 14:39 ` David Ahern
2016-07-01 17:58 ` Ido Schimmel
2016-07-01 14:04 ` [patch net-next 11/42] mlxsw: spectrum: Add router interface struct Jiri Pirko
2016-07-01 16:16 ` David Ahern
2016-07-01 18:37 ` Ido Schimmel
2016-07-01 14:04 ` [patch net-next 12/42] mlxsw: reg: Add FDB action to forward to router Jiri Pirko
2016-07-01 14:04 ` [patch net-next 13/42] mlxsw: reg: Add Router Interface Table Register Jiri Pirko
2016-07-01 14:04 ` [patch net-next 14/42] mlxsw: spectrum: Use action 'discard' when removing traps Jiri Pirko
2016-07-01 14:04 ` Jiri Pirko [this message]
2016-07-01 14:04 ` [patch net-next 16/42] mlxsw: spectrum_router: Implement private fib Jiri Pirko
2016-07-01 14:04 ` [patch net-next 17/42] mlxsw: reg: Add Router Algorithmic LPM Tree Allocation Register definition Jiri Pirko
2016-07-01 14:04 ` [patch net-next 18/42] mlxsw: reg: Add Router Algorithmic LPM Structure Tree " Jiri Pirko
2016-07-01 14:04 ` [patch net-next 19/42] mlxsw: reg: Add Router Algorithmic LPM Tree Binding " Jiri Pirko
2016-07-01 14:04 ` [patch net-next 20/42] mlxsw: spectrum_router: Implement LPM trees management Jiri Pirko
2016-07-01 14:04 ` [patch net-next 21/42] mlxsw: spectrum_router: Add virtual router management Jiri Pirko
2016-07-01 14:04 ` [patch net-next 22/42] mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition Jiri Pirko
2016-07-01 14:04 ` [patch net-next 23/42] mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops Jiri Pirko
2016-07-01 16:10 ` David Ahern
2016-07-02 6:30 ` Jiri Pirko
2016-07-01 14:04 ` [patch net-next 24/42] mlxsw: spectrum: Add couple of lower device helper functions Jiri Pirko
2016-07-01 14:04 ` [patch net-next 25/42] mlxsw: spectrum: Edit RIF properties based on netdev events Jiri Pirko
2016-07-01 14:04 ` [patch net-next 26/42] mlxsw: spectrum: Introduce support for router interfaces Jiri Pirko
2016-07-01 14:04 ` [patch net-next 27/42] mlxsw: spectrum: Unsplit the vFID range Jiri Pirko
2016-07-01 14:04 ` [patch net-next 28/42] mlxsw: spectrum: Configure FIDs based on bridge events Jiri Pirko
2016-07-01 14:04 ` [patch net-next 29/42] mlxsw: spectrum: Enable L3 interfaces on top of bridge devices Jiri Pirko
2016-07-01 14:04 ` [patch net-next 30/42] mlxsw: spectrum_router: Add private neigh table Jiri Pirko
2016-07-01 14:04 ` [patch net-next 31/42] mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table register Jiri Pirko
2016-07-01 14:05 ` [patch net-next 32/42] mlxsw: reg: Add Router Algorithmic LPM Unicast Host Table Dump register Jiri Pirko
2016-07-01 14:05 ` [patch net-next 33/42] mlxsw: spectrum_router: Periodically update the kernel's neigh table Jiri Pirko
2016-07-01 14:05 ` [patch net-next 34/42] mlxsw: spectrum_router: Offload neighbours based on NUD state change Jiri Pirko
2016-07-01 14:05 ` [patch net-next 35/42] mlxsw: Add KVD sizes configuration into profile Jiri Pirko
2016-07-01 14:05 ` [patch net-next 36/42] mlxsw: spectrum: Define sizes of KVD areas Jiri Pirko
2016-07-01 14:05 ` [patch net-next 37/42] mlxsw: Introduce simplistic KVD linear area manager Jiri Pirko
2016-07-01 14:05 ` [patch net-next 38/42] mlxsw: reg: Add Router Adjacency Table register Jiri Pirko
2016-07-01 14:05 ` [patch net-next 39/42] mlxsw: reg: Add Router Algorithmic LPM ECMP Update Register Jiri Pirko
2016-07-01 14:05 ` [patch net-next 40/42] mlxsw: spectrum_router: Implement next-hop routing Jiri Pirko
2016-07-01 14:05 ` [patch net-next 41/42] mlxsw: spectrum_router: Add the nexthop neigh activity update Jiri Pirko
2016-07-01 14:05 ` [patch net-next 42/42] mlxsw: Add the unresolved next-hops probes Jiri Pirko
2016-07-01 19:27 ` [patch net-next 00/42] mlxsw: Implement IPV4 unicast routing David Miller
2016-07-02 6:31 ` Jiri Pirko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467381910-3445-16-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=andy@greyhouse.net \
--cc=davem@davemloft.net \
--cc=dsa@cumulusnetworks.com \
--cc=eladr@mellanox.com \
--cc=idosch@mellanox.com \
--cc=ivecera@redhat.com \
--cc=jhs@mojatatu.com \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=nogahf@mellanox.com \
--cc=ogerlitz@mellanox.com \
--cc=roopa@cumulusnetworks.com \
--cc=sfeldma@gmail.com \
--cc=tgraf@suug.ch \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).