From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Fainelli Subject: [PATCH 0/2] ARM: dts: NSP: Add built-in Ethernet switch nodes Date: Fri, 8 Jul 2016 11:48:50 -0700 Message-ID: <1468003735-26895-1-git-send-email-f.fainelli@gmail.com> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, jon.mason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org, andrew-g2DYL2Zd6BY@public.gmane.org, vivien.didelot-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Florian Fainelli To: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org This patch series is based on Broadcom/stblinux/devicetree/next which contains proper support for the BCM958625HR board. To get working Ethernet switch and CPU Ethernet support, the following dependencies based on David Miller's net-next tree are required: - Jon Mason's BGMAC/AMAC support: https://marc.info/?t=146793308300002&r=1&w=3 - dsa/b53 support for NSP switch: https://marc.info/?l=linux-netdev&m=146800324531914&w=3 Florian Fainelli (2): ARM: dts: NSP: Add Switch Register Access Block node ARM: dts: NSP: Add BCM958625HR switch ports arch/arm/boot/dts/bcm-nsp.dtsi | 11 +++++++++ arch/arm/boot/dts/bcm958625hr.dts | 49 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 60 insertions(+) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html