From: Philippe Reynes <tremyfr@gmail.com>
To: f.fainelli@gmail.com, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] Revert "net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings"
Date: Sat, 9 Jul 2016 00:54:47 +0200 [thread overview]
Message-ID: <1468018487-8102-1-git-send-email-tremyfr@gmail.com> (raw)
This reverts commit 4386f5662e63 ("net: ethernet: bcmgenet: use
phy_ethtool_{get|set}_link_ksettings")
This patch is wrong, the function phy_ethtool_{get|set}_link_ksettings
don't check if the device is running, but the driver bcmgenet need this
check.
The function {get|set}_settings need to access the mdio bus, and this
bus may only be used when the device is running. Otherwise, the clock
is disable and a mdio access will fail.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 28 ++++++++++++++++++++++-
1 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 76ed6df..8d4f849 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -450,6 +450,30 @@ static inline void bcmgenet_rdma_ring_writel(struct bcmgenet_priv *priv,
genet_dma_ring_regs[r]);
}
+static int bcmgenet_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ if (!dev->phydev)
+ return -ENODEV;
+
+ return phy_ethtool_gset(dev->phydev, cmd);
+}
+
+static int bcmgenet_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ if (!dev->phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(dev->phydev, cmd);
+}
+
static int bcmgenet_set_rx_csum(struct net_device *dev,
netdev_features_t wanted)
{
@@ -953,6 +977,8 @@ static struct ethtool_ops bcmgenet_ethtool_ops = {
.get_strings = bcmgenet_get_strings,
.get_sset_count = bcmgenet_get_sset_count,
.get_ethtool_stats = bcmgenet_get_ethtool_stats,
+ .get_settings = bcmgenet_get_settings,
+ .set_settings = bcmgenet_set_settings,
.get_drvinfo = bcmgenet_get_drvinfo,
.get_link = ethtool_op_get_link,
.get_msglevel = bcmgenet_get_msglevel,
@@ -964,8 +990,6 @@ static struct ethtool_ops bcmgenet_ethtool_ops = {
.nway_reset = bcmgenet_nway_reset,
.get_coalesce = bcmgenet_get_coalesce,
.set_coalesce = bcmgenet_set_coalesce,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
};
/* Power down the unimac, based on mode. */
--
1.7.4.4
next reply other threads:[~2016-07-08 22:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-08 22:54 Philippe Reynes [this message]
2016-07-08 23:00 ` [PATCH] Revert "net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings" Florian Fainelli
2016-07-11 19:57 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468018487-8102-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).