netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Philippe Reynes <tremyfr@gmail.com>
To: davem@davemloft.net, andrew@lunn.ch, tklauser@distanz.ch,
	colin.king@canonical.com, f.fainelli@gmail.com,
	jcmvbkbc@gmail.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH v2 1/2] net: ethernet: ethoc: use phydev from struct net_device
Date: Fri, 15 Jul 2016 09:59:11 +0200	[thread overview]
Message-ID: <1468569552-24824-1-git-send-email-tremyfr@gmail.com> (raw)

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
Changelog:
v2:
- remove the definition of phy in the ethoc private struct (thanks Tobias Klauser)

 drivers/net/ethernet/ethoc.c |   20 +++++++-------------
 1 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 4edb98c..317168a 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -192,7 +192,6 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
  * @napi:	NAPI structure
  * @msg_enable:	device state flags
  * @lock:	device lock
- * @phy:	attached PHY
  * @mdio:	MDIO bus for PHY access
  * @phy_id:	address of attached PHY
  */
@@ -219,7 +218,6 @@ struct ethoc {
 
 	spinlock_t lock;
 
-	struct phy_device *phy;
 	struct mii_bus *mdio;
 	struct clk *clk;
 	s8 phy_id;
@@ -694,7 +692,6 @@ static int ethoc_mdio_probe(struct net_device *dev)
 		return err;
 	}
 
-	priv->phy = phy;
 	phy->advertising &= ~(ADVERTISED_1000baseT_Full |
 			      ADVERTISED_1000baseT_Half);
 	phy->supported &= ~(SUPPORTED_1000baseT_Full |
@@ -724,7 +721,7 @@ static int ethoc_open(struct net_device *dev)
 		netif_start_queue(dev);
 	}
 
-	phy_start(priv->phy);
+	phy_start(dev->phydev);
 	napi_enable(&priv->napi);
 
 	if (netif_msg_ifup(priv)) {
@@ -741,8 +738,8 @@ static int ethoc_stop(struct net_device *dev)
 
 	napi_disable(&priv->napi);
 
-	if (priv->phy)
-		phy_stop(priv->phy);
+	if (dev->phydev)
+		phy_stop(dev->phydev);
 
 	ethoc_disable_rx_and_tx(priv);
 	free_irq(dev->irq, dev);
@@ -770,7 +767,7 @@ static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (!phy)
 			return -ENODEV;
 	} else {
-		phy = priv->phy;
+		phy = dev->phydev;
 	}
 
 	return phy_mii_ioctl(phy, ifr, cmd);
@@ -899,8 +896,7 @@ out:
 
 static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct ethoc *priv = netdev_priv(dev);
-	struct phy_device *phydev = priv->phy;
+	struct phy_device *phydev = dev->phydev;
 
 	if (!phydev)
 		return -EOPNOTSUPP;
@@ -910,8 +906,7 @@ static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
-	struct ethoc *priv = netdev_priv(dev);
-	struct phy_device *phydev = priv->phy;
+	struct phy_device *phydev = dev->phydev;
 
 	if (!phydev)
 		return -EOPNOTSUPP;
@@ -1261,8 +1256,7 @@ static int ethoc_remove(struct platform_device *pdev)
 
 	if (netdev) {
 		netif_napi_del(&priv->napi);
-		phy_disconnect(priv->phy);
-		priv->phy = NULL;
+		phy_disconnect(netdev->phydev);
 
 		if (priv->mdio) {
 			mdiobus_unregister(priv->mdio);
-- 
1.7.4.4

             reply	other threads:[~2016-07-15  7:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-15  7:59 Philippe Reynes [this message]
2016-07-15  7:59 ` [PATCH v2 2/2] net: ethernet: ethoc: use phy_ethtool_{get|set}_link_ksettings Philippe Reynes
2016-07-15  8:41   ` Tobias Klauser
2016-07-15 23:43   ` David Miller
2016-07-15  8:40 ` [PATCH v2 1/2] net: ethernet: ethoc: use phydev from struct net_device Tobias Klauser
2016-07-15 23:43 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1468569552-24824-1-git-send-email-tremyfr@gmail.com \
    --to=tremyfr@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=colin.king@canonical.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=jcmvbkbc@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=tklauser@distanz.ch \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).