From: Philippe Reynes <tremyfr@gmail.com>
To: davem@davemloft.net, jszhang@marvell.com,
sergei.shtylyov@cogentembedded.com, mugunthanvnm@ti.com,
a@unstable.cc, fw@strlen.de
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH 1/2] net: ethernet: marvell: pxa168_eth: use phydev from struct net_device
Date: Sun, 17 Jul 2016 23:30:45 +0200 [thread overview]
Message-ID: <1468791046-19567-1-git-send-email-tremyfr@gmail.com> (raw)
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/marvell/pxa168_eth.c | 36 +++++++++++++----------------
1 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 54d5154..d466326 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -247,7 +247,6 @@ struct pxa168_eth_private {
*/
struct timer_list timeout;
struct mii_bus *smi_bus;
- struct phy_device *phy;
/* clock */
struct clk *clk;
@@ -644,7 +643,7 @@ static void eth_port_start(struct net_device *dev)
struct pxa168_eth_private *pep = netdev_priv(dev);
int tx_curr_desc, rx_curr_desc;
- phy_start(pep->phy);
+ phy_start(dev->phydev);
/* Assignment of Tx CTRP of given queue */
tx_curr_desc = pep->tx_curr_desc_q;
@@ -700,7 +699,7 @@ static void eth_port_reset(struct net_device *dev)
val &= ~PCR_EN;
wrl(pep, PORT_CONFIG, val);
- phy_stop(pep->phy);
+ phy_stop(dev->phydev);
}
/*
@@ -943,7 +942,7 @@ static int set_port_config_ext(struct pxa168_eth_private *pep)
static void pxa168_eth_adjust_link(struct net_device *dev)
{
struct pxa168_eth_private *pep = netdev_priv(dev);
- struct phy_device *phy = pep->phy;
+ struct phy_device *phy = dev->phydev;
u32 cfg, cfg_o = rdl(pep, PORT_CONFIG);
u32 cfgext, cfgext_o = rdl(pep, PORT_CONFIG_EXT);
@@ -973,16 +972,17 @@ static int pxa168_init_phy(struct net_device *dev)
{
struct pxa168_eth_private *pep = netdev_priv(dev);
struct ethtool_cmd cmd;
+ struct phy_device *phy = NULL;
int err;
- if (pep->phy)
+ if (dev->phydev)
return 0;
- pep->phy = mdiobus_scan(pep->smi_bus, pep->phy_addr);
- if (IS_ERR(pep->phy))
- return PTR_ERR(pep->phy);
+ phy = mdiobus_scan(pep->smi_bus, pep->phy_addr);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
- err = phy_connect_direct(dev, pep->phy, pxa168_eth_adjust_link,
+ err = phy_connect_direct(dev, phy, pxa168_eth_adjust_link,
pep->phy_intf);
if (err)
return err;
@@ -1366,30 +1366,26 @@ static int pxa168_smi_write(struct mii_bus *bus, int phy_addr, int regnum,
static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr,
int cmd)
{
- struct pxa168_eth_private *pep = netdev_priv(dev);
- if (pep->phy != NULL)
- return phy_mii_ioctl(pep->phy, ifr, cmd);
+ if (dev->phydev != NULL)
+ return phy_mii_ioctl(dev->phydev, ifr, cmd);
return -EOPNOTSUPP;
}
static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct pxa168_eth_private *pep = netdev_priv(dev);
int err;
- err = phy_read_status(pep->phy);
+ err = phy_read_status(dev->phydev);
if (err == 0)
- err = phy_ethtool_gset(pep->phy, cmd);
+ err = phy_ethtool_gset(dev->phydev, cmd);
return err;
}
static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct pxa168_eth_private *pep = netdev_priv(dev);
-
- return phy_ethtool_sset(pep->phy, cmd);
+ return phy_ethtool_sset(dev->phydev, cmd);
}
static void pxa168_get_drvinfo(struct net_device *dev,
@@ -1569,8 +1565,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
pep->htpr, pep->htpr_dma);
pep->htpr = NULL;
}
- if (pep->phy)
- phy_disconnect(pep->phy);
+ if (dev->phydev)
+ phy_disconnect(dev->phydev);
if (pep->clk) {
clk_disable_unprepare(pep->clk);
}
--
1.7.4.4
next reply other threads:[~2016-07-17 21:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-17 21:30 Philippe Reynes [this message]
2016-07-17 21:30 ` [PATCH 2/2] net: ethernet: marvell: pxa168_eth: use phy_ethtool_{get|set}_link_ksettings Philippe Reynes
2016-07-18 6:23 ` David Miller
2016-07-18 22:02 ` Florian Fainelli
2016-07-18 6:22 ` [PATCH 1/2] net: ethernet: marvell: pxa168_eth: use phydev from struct net_device David Miller
2016-07-18 10:14 ` Sergei Shtylyov
2016-07-18 22:00 ` Philippe Reynes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468791046-19567-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=a@unstable.cc \
--cc=davem@davemloft.net \
--cc=fw@strlen.de \
--cc=jszhang@marvell.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).