From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, idosch@mellanox.com, eladr@mellanox.com,
yotamg@mellanox.com, nogahf@mellanox.com, ogerlitz@mellanox.com
Subject: [patch net-next 1/2] mlxsw: spectrum: Expose per-priority counters via ethtool
Date: Tue, 19 Jul 2016 15:35:53 +0200 [thread overview]
Message-ID: <1468935354-7008-2-git-send-email-jiri@resnulli.us> (raw)
In-Reply-To: <1468935354-7008-1-git-send-email-jiri@resnulli.us>
From: Ido Schimmel <idosch@mellanox.com>
Expose per-priority bytes / packets / PFC packets counters via ethtool.
These counters are very useful when debugging QoS functionality and
provide a better insight into the device's forwarding plane.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 116 +++++++++++++++++++++++--
1 file changed, 107 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index c812513..784a2cd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -899,7 +899,7 @@ struct mlxsw_sp_port_hw_stats {
u64 (*getter)(char *payload);
};
-static const struct mlxsw_sp_port_hw_stats mlxsw_sp_port_hw_stats[] = {
+static struct mlxsw_sp_port_hw_stats mlxsw_sp_port_hw_stats[] = {
{
.str = "a_frames_transmitted_ok",
.getter = mlxsw_reg_ppcnt_a_frames_transmitted_ok_get,
@@ -980,6 +980,58 @@ static const struct mlxsw_sp_port_hw_stats mlxsw_sp_port_hw_stats[] = {
#define MLXSW_SP_PORT_HW_STATS_LEN ARRAY_SIZE(mlxsw_sp_port_hw_stats)
+static struct mlxsw_sp_port_hw_stats mlxsw_sp_port_hw_prio_stats[] = {
+ {
+ .str = "rx_octets_prio",
+ .getter = mlxsw_reg_ppcnt_rx_octets_get,
+ },
+ {
+ .str = "rx_frames_prio",
+ .getter = mlxsw_reg_ppcnt_rx_frames_get,
+ },
+ {
+ .str = "tx_octets_prio",
+ .getter = mlxsw_reg_ppcnt_tx_octets_get,
+ },
+ {
+ .str = "tx_frames_prio",
+ .getter = mlxsw_reg_ppcnt_tx_frames_get,
+ },
+ {
+ .str = "rx_pause_prio",
+ .getter = mlxsw_reg_ppcnt_rx_pause_get,
+ },
+ {
+ .str = "rx_pause_duration_prio",
+ .getter = mlxsw_reg_ppcnt_rx_pause_duration_get,
+ },
+ {
+ .str = "tx_pause_prio",
+ .getter = mlxsw_reg_ppcnt_tx_pause_get,
+ },
+ {
+ .str = "tx_pause_duration_prio",
+ .getter = mlxsw_reg_ppcnt_tx_pause_duration_get,
+ },
+};
+
+#define MLXSW_SP_PORT_HW_PRIO_STATS_LEN ARRAY_SIZE(mlxsw_sp_port_hw_prio_stats)
+
+#define MLXSW_SP_PORT_ETHTOOL_STATS_LEN (MLXSW_SP_PORT_HW_STATS_LEN + \
+ MLXSW_SP_PORT_HW_PRIO_STATS_LEN * \
+ IEEE_8021QAZ_MAX_TCS)
+
+static void mlxsw_sp_port_get_prio_strings(u8 **p, int prio)
+{
+ int i;
+
+ for (i = 0; i < MLXSW_SP_PORT_HW_PRIO_STATS_LEN; i++) {
+ snprintf(*p, ETH_GSTRING_LEN, "%s_%d",
+ mlxsw_sp_port_hw_prio_stats[i].str, prio);
+ *p += ETH_GSTRING_LEN;
+ }
+}
+
static void mlxsw_sp_port_get_strings(struct net_device *dev,
u32 stringset, u8 *data)
{
@@ -993,6 +1045,10 @@ static void mlxsw_sp_port_get_strings(struct net_device *dev,
ETH_GSTRING_LEN);
p += ETH_GSTRING_LEN;
}
+
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
+ mlxsw_sp_port_get_prio_strings(&p, i);
+
break;
}
}
@@ -1020,27 +1076,69 @@ static int mlxsw_sp_port_set_phys_id(struct net_device *dev,
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mlcr), mlcr_pl);
}
-static void mlxsw_sp_port_get_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data)
+static int
+mlxsw_sp_get_hw_stats_by_group(struct mlxsw_sp_port_hw_stats **p_hw_stats,
+ int *p_len, enum mlxsw_reg_ppcnt_grp grp)
+{
+ switch (grp) {
+ case MLXSW_REG_PPCNT_IEEE_8023_CNT:
+ *p_hw_stats = mlxsw_sp_port_hw_stats;
+ *p_len = MLXSW_SP_PORT_HW_STATS_LEN;
+ break;
+ case MLXSW_REG_PPCNT_PRIO_CNT:
+ *p_hw_stats = mlxsw_sp_port_hw_prio_stats;
+ *p_len = MLXSW_SP_PORT_HW_PRIO_STATS_LEN;
+ break;
+ default:
+ WARN_ON(1);
+ return -ENOTSUPP;
+ }
+ return 0;
+}
+
+static void __mlxsw_sp_port_get_stats(struct net_device *dev,
+ enum mlxsw_reg_ppcnt_grp grp, int prio,
+ u64 *data, int data_index)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+ struct mlxsw_sp_port_hw_stats *hw_stats;
char ppcnt_pl[MLXSW_REG_PPCNT_LEN];
- int i;
+ int i, len;
int err;
- mlxsw_reg_ppcnt_pack(ppcnt_pl, mlxsw_sp_port->local_port,
- MLXSW_REG_PPCNT_IEEE_8023_CNT, 0);
+ err = mlxsw_sp_get_hw_stats_by_group(&hw_stats, &len, grp);
+ if (err)
+ return;
+ mlxsw_reg_ppcnt_pack(ppcnt_pl, mlxsw_sp_port->local_port, grp, prio);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ppcnt), ppcnt_pl);
- for (i = 0; i < MLXSW_SP_PORT_HW_STATS_LEN; i++)
- data[i] = !err ? mlxsw_sp_port_hw_stats[i].getter(ppcnt_pl) : 0;
+ for (i = 0; i < len; i++)
+ data[data_index + i] = !err ? hw_stats[i].getter(ppcnt_pl) : 0;
+}
+
+static void mlxsw_sp_port_get_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ int i, data_index = 0;
+
+ /* IEEE 802.3 Counters */
+ __mlxsw_sp_port_get_stats(dev, MLXSW_REG_PPCNT_IEEE_8023_CNT, 0,
+ data, data_index);
+ data_index = MLXSW_SP_PORT_HW_STATS_LEN;
+
+ /* Per-Priority Counters */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+ __mlxsw_sp_port_get_stats(dev, MLXSW_REG_PPCNT_PRIO_CNT, i,
+ data, data_index);
+ data_index += MLXSW_SP_PORT_HW_PRIO_STATS_LEN;
+ }
}
static int mlxsw_sp_port_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
- return MLXSW_SP_PORT_HW_STATS_LEN;
+ return MLXSW_SP_PORT_ETHTOOL_STATS_LEN;
default:
return -EOPNOTSUPP;
}
--
2.5.5
next prev parent reply other threads:[~2016-07-19 13:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-19 13:35 [patch net-next 0/2] mlxsw: Add per-{Prio,TC} counters Jiri Pirko
2016-07-19 13:35 ` Jiri Pirko [this message]
2016-07-19 13:35 ` [patch net-next 2/2] mlxsw: spectrum: Expose per-tc counters via ethtool Jiri Pirko
2016-07-20 21:55 ` [patch net-next 0/2] mlxsw: Add per-{Prio,TC} counters David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468935354-7008-2-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=davem@davemloft.net \
--cc=eladr@mellanox.com \
--cc=idosch@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=nogahf@mellanox.com \
--cc=ogerlitz@mellanox.com \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).