From: Phil Sutter <phil@nwl.cc>
To: David Miller <davem@davemloft.net>
Cc: Xin Long <lucien.xin@gmail.com>,
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>,
netdev@vger.kernel.org
Subject: [PATCH 1/3] sctp: Export struct sctp_info to userspace
Date: Fri, 29 Jul 2016 18:59:38 +0200 [thread overview]
Message-ID: <1469811580-32429-2-git-send-email-phil@nwl.cc> (raw)
In-Reply-To: <1469811580-32429-1-git-send-email-phil@nwl.cc>
This is required to correctly interpret INET_DIAG_INFO messages exported
by sctp_diag module.
Signed-off-by: Phil Sutter <phil@nwl.cc>
---
include/linux/sctp.h | 64 -----------------------------------------------
include/uapi/linux/sctp.h | 64 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+), 64 deletions(-)
diff --git a/include/linux/sctp.h b/include/linux/sctp.h
index de1f64318fc4e..fcb4c36461732 100644
--- a/include/linux/sctp.h
+++ b/include/linux/sctp.h
@@ -705,70 +705,6 @@ typedef struct sctp_auth_chunk {
sctp_authhdr_t auth_hdr;
} __packed sctp_auth_chunk_t;
-struct sctp_info {
- __u32 sctpi_tag;
- __u32 sctpi_state;
- __u32 sctpi_rwnd;
- __u16 sctpi_unackdata;
- __u16 sctpi_penddata;
- __u16 sctpi_instrms;
- __u16 sctpi_outstrms;
- __u32 sctpi_fragmentation_point;
- __u32 sctpi_inqueue;
- __u32 sctpi_outqueue;
- __u32 sctpi_overall_error;
- __u32 sctpi_max_burst;
- __u32 sctpi_maxseg;
- __u32 sctpi_peer_rwnd;
- __u32 sctpi_peer_tag;
- __u8 sctpi_peer_capable;
- __u8 sctpi_peer_sack;
- __u16 __reserved1;
-
- /* assoc status info */
- __u64 sctpi_isacks;
- __u64 sctpi_osacks;
- __u64 sctpi_opackets;
- __u64 sctpi_ipackets;
- __u64 sctpi_rtxchunks;
- __u64 sctpi_outofseqtsns;
- __u64 sctpi_idupchunks;
- __u64 sctpi_gapcnt;
- __u64 sctpi_ouodchunks;
- __u64 sctpi_iuodchunks;
- __u64 sctpi_oodchunks;
- __u64 sctpi_iodchunks;
- __u64 sctpi_octrlchunks;
- __u64 sctpi_ictrlchunks;
-
- /* primary transport info */
- struct sockaddr_storage sctpi_p_address;
- __s32 sctpi_p_state;
- __u32 sctpi_p_cwnd;
- __u32 sctpi_p_srtt;
- __u32 sctpi_p_rto;
- __u32 sctpi_p_hbinterval;
- __u32 sctpi_p_pathmaxrxt;
- __u32 sctpi_p_sackdelay;
- __u32 sctpi_p_sackfreq;
- __u32 sctpi_p_ssthresh;
- __u32 sctpi_p_partial_bytes_acked;
- __u32 sctpi_p_flight_size;
- __u16 sctpi_p_error;
- __u16 __reserved2;
-
- /* sctp sock info */
- __u32 sctpi_s_autoclose;
- __u32 sctpi_s_adaptation_ind;
- __u32 sctpi_s_pd_point;
- __u8 sctpi_s_nodelay;
- __u8 sctpi_s_disable_fragments;
- __u8 sctpi_s_v4mapped;
- __u8 sctpi_s_frag_interleave;
- __u32 sctpi_s_type;
- __u32 __reserved3;
-};
-
struct sctp_infox {
struct sctp_info *sctpinfo;
struct sctp_association *asoc;
diff --git a/include/uapi/linux/sctp.h b/include/uapi/linux/sctp.h
index d304f4c9792c4..a406adcc0793e 100644
--- a/include/uapi/linux/sctp.h
+++ b/include/uapi/linux/sctp.h
@@ -944,4 +944,68 @@ struct sctp_default_prinfo {
__u16 pr_policy;
};
+struct sctp_info {
+ __u32 sctpi_tag;
+ __u32 sctpi_state;
+ __u32 sctpi_rwnd;
+ __u16 sctpi_unackdata;
+ __u16 sctpi_penddata;
+ __u16 sctpi_instrms;
+ __u16 sctpi_outstrms;
+ __u32 sctpi_fragmentation_point;
+ __u32 sctpi_inqueue;
+ __u32 sctpi_outqueue;
+ __u32 sctpi_overall_error;
+ __u32 sctpi_max_burst;
+ __u32 sctpi_maxseg;
+ __u32 sctpi_peer_rwnd;
+ __u32 sctpi_peer_tag;
+ __u8 sctpi_peer_capable;
+ __u8 sctpi_peer_sack;
+ __u16 __reserved1;
+
+ /* assoc status info */
+ __u64 sctpi_isacks;
+ __u64 sctpi_osacks;
+ __u64 sctpi_opackets;
+ __u64 sctpi_ipackets;
+ __u64 sctpi_rtxchunks;
+ __u64 sctpi_outofseqtsns;
+ __u64 sctpi_idupchunks;
+ __u64 sctpi_gapcnt;
+ __u64 sctpi_ouodchunks;
+ __u64 sctpi_iuodchunks;
+ __u64 sctpi_oodchunks;
+ __u64 sctpi_iodchunks;
+ __u64 sctpi_octrlchunks;
+ __u64 sctpi_ictrlchunks;
+
+ /* primary transport info */
+ struct sockaddr_storage sctpi_p_address;
+ __s32 sctpi_p_state;
+ __u32 sctpi_p_cwnd;
+ __u32 sctpi_p_srtt;
+ __u32 sctpi_p_rto;
+ __u32 sctpi_p_hbinterval;
+ __u32 sctpi_p_pathmaxrxt;
+ __u32 sctpi_p_sackdelay;
+ __u32 sctpi_p_sackfreq;
+ __u32 sctpi_p_ssthresh;
+ __u32 sctpi_p_partial_bytes_acked;
+ __u32 sctpi_p_flight_size;
+ __u16 sctpi_p_error;
+ __u16 __reserved2;
+
+ /* sctp sock info */
+ __u32 sctpi_s_autoclose;
+ __u32 sctpi_s_adaptation_ind;
+ __u32 sctpi_s_pd_point;
+ __u8 sctpi_s_nodelay;
+ __u8 sctpi_s_disable_fragments;
+ __u8 sctpi_s_v4mapped;
+ __u8 sctpi_s_frag_interleave;
+ __u32 sctpi_s_type;
+ __u32 __reserved3;
+};
+
#endif /* _UAPI_SCTP_H */
--
2.8.2
next prev parent reply other threads:[~2016-07-29 17:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-29 16:59 [PATCH 0/3] sctp_diag: A bunch of fixes for upcoming 'ss' support Phil Sutter
2016-07-29 16:59 ` Phil Sutter [this message]
2016-07-31 21:18 ` [PATCH 1/3] sctp: Export struct sctp_info to userspace Stephen Hemminger
2016-08-01 13:36 ` Phil Sutter
2016-07-29 16:59 ` [PATCH 2/3] sctp_diag: export timer value only if it is active Phil Sutter
2016-07-29 20:51 ` Marcelo Ricardo Leitner
2016-07-30 13:25 ` Xin Long
2016-07-30 13:33 ` Marcelo Ricardo Leitner
2016-07-30 17:59 ` Phil Sutter
2016-07-31 15:57 ` Xin Long
2016-08-03 19:28 ` Phil Sutter
2016-08-03 19:46 ` Marcelo Ricardo Leitner
2016-08-03 20:15 ` Phil Sutter
2016-07-29 16:59 ` [PATCH 3/3] sctp_diag: Respect ss adding TCPF_CLOSE to idiag_states Phil Sutter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469811580-32429-2-git-send-email-phil@nwl.cc \
--to=phil@nwl.cc \
--cc=davem@davemloft.net \
--cc=lucien.xin@gmail.com \
--cc=marcelo.leitner@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).