From: Philippe Reynes <tremyfr@gmail.com>
To: thomas.petazzoni@free-electrons.com, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH 2/2] net: ethernet: marvell: mvneta: use new api ethtool_{get|set}_link_ksettings
Date: Sat, 30 Jul 2016 17:42:12 +0200 [thread overview]
Message-ID: <1469893332-24535-2-git-send-email-tremyfr@gmail.com> (raw)
In-Reply-To: <1469893332-24535-1-git-send-email-tremyfr@gmail.com>
The ethtool api {get|set}_settings is deprecated.
We move the mvneta driver to new api {get|set}_link_ksettings.
We use the generic function phy_ethtool_get_link_ksettings,
and update old mvneta_ethtool_set_settings to the new api.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/marvell/mvneta.c | 34 ++++++++++++--------------------
1 files changed, 13 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 410adc7..2021863 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3505,30 +3505,22 @@ static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
/* Ethtool methods */
-/* Get settings (phy address, speed) for ethtools */
-int mvneta_ethtool_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+/* Set link ksettings (phy address, speed) for ethtools */
+int mvneta_ethtool_set_link_ksettings(struct net_device *ndev,
+ const struct ethtool_link_ksettings *cmd)
{
- if (!dev->phydev)
- return -ENODEV;
-
- return phy_ethtool_gset(dev->phydev, cmd);
-}
-
-/* Set settings (phy address, speed) for ethtools */
-int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct mvneta_port *pp = netdev_priv(dev);
- struct phy_device *phydev = dev->phydev;
+ struct mvneta_port *pp = netdev_priv(ndev);
+ struct phy_device *phydev = ndev->phydev;
if (!phydev)
return -ENODEV;
- if ((cmd->autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
+ if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
u32 val;
- mvneta_set_autoneg(pp, cmd->autoneg == AUTONEG_ENABLE);
+ mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE);
- if (cmd->autoneg == AUTONEG_DISABLE) {
+ if (cmd->base.autoneg == AUTONEG_DISABLE) {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
@@ -3545,17 +3537,17 @@ int mvneta_ethtool_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
}
- pp->use_inband_status = (cmd->autoneg == AUTONEG_ENABLE);
+ pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE);
netdev_info(pp->dev, "autoneg status set to %i\n",
pp->use_inband_status);
- if (netif_running(dev)) {
+ if (netif_running(ndev)) {
mvneta_port_down(pp);
mvneta_port_up(pp);
}
}
- return phy_ethtool_sset(dev->phydev, cmd);
+ return phy_ethtool_ksettings_set(ndev->phydev, cmd);
}
/* Set interrupt coalescing for ethtools */
@@ -3819,8 +3811,6 @@ static const struct net_device_ops mvneta_netdev_ops = {
const struct ethtool_ops mvneta_eth_tool_ops = {
.get_link = ethtool_op_get_link,
- .get_settings = mvneta_ethtool_get_settings,
- .set_settings = mvneta_ethtool_set_settings,
.set_coalesce = mvneta_ethtool_set_coalesce,
.get_coalesce = mvneta_ethtool_get_coalesce,
.get_drvinfo = mvneta_ethtool_get_drvinfo,
@@ -3833,6 +3823,8 @@ const struct ethtool_ops mvneta_eth_tool_ops = {
.get_rxnfc = mvneta_ethtool_get_rxnfc,
.get_rxfh = mvneta_ethtool_get_rxfh,
.set_rxfh = mvneta_ethtool_set_rxfh,
+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
};
/* Initialize hw */
--
1.7.4.4
prev parent reply other threads:[~2016-07-30 15:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-30 15:42 [PATCH 1/2] net: ethernet: marvell: mvneta: use phydev from struct net_device Philippe Reynes
2016-07-30 15:42 ` Philippe Reynes [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469893332-24535-2-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).