From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: netdev@vger.kernel.org, mugunthanvnm@ti.com, grygorii.strashko@ti.com
Cc: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
dlide@ti.com, Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [PATCH v2 00/14] net: ethernet: ti: cpsw: split driver data and per ndev data
Date: Sat, 6 Aug 2016 13:48:30 +0300 [thread overview]
Message-ID: <1470480524-6851-1-git-send-email-ivan.khoronzhuk@linaro.org> (raw)
In dual_emac mode the driver can handle 2 network devices. Each of them can use
its own private data and common data/resources. This patchset splits common driver
data/resources and private per net device data.
It leads to:
- reduce memory usage
- increase code readability
- allows add a bunch of simplification
- create prerequisites to add multi-channel support,
when channels are shared between net devices
Doesn't have bad impact on performance.
v1: https://lkml.org/lkml/2016/8/4/616
Since v1:
- added several patch improvements
- avoided variable reordering in structures
- removed static variable for common function
- split big patch on several patches:
net: ethernet: ti: cpsw: remove priv from cpsw_get_slave_port() parameters list
net: ethernet: ti: cpsw: remove clk var from priv
net: ethernet: ti: cpsw: don't check slave num in runtime
net: ethernet: ti: cpsw: create common struct to hold shared driver data
net: ethernet: ti: cpsw: replace pdev on dev
net: ethernet: ti: cpsw: move links on h/w registers to cpsw_common
net: ethernet: ti: cpsw: move cpdma resources to cpsw_common
net; ethernet: ti: cpsw: move irq stuff under cpsw_common
net: ethernet: ti: cpsw: move data platform data and slaves info to cpsw_common
net: ethernet: ti: cpsw: fix int dbg message
net: ethernet: ti: cpsw: move napi struct to cpsw_common
net: ethernet: ti: cpsw: move ale, cpts and drivers params under
Based on net-next/master
Ivan Khoronzhuk (14):
net: ethernet: ti: cpsw: simplify submit routine
net: ethernet: ti: cpsw: remove redundant check in napi poll
net: ethernet: ti: cpsw: remove priv from cpsw_get_slave_port()
parameters list
net: ethernet: ti: cpsw: remove clk var from priv
net: ethernet: ti: cpsw: don't check slave num in runtime
net: ethernet: ti: cpsw: create common struct to hold shared driver
data
net: ethernet: ti: cpsw: replace pdev on dev
net: ethernet: ti: cpsw: move links on h/w registers to cpsw_common
net: ethernet: ti: cpsw: move cpdma resources to cpsw_common
net; ethernet: ti: cpsw: move irq stuff under cpsw_common
net: ethernet: ti: cpsw: move data platform data and slaves info to
cpsw_common
net: ethernet: ti: cpsw: fix int dbg message
net: ethernet: ti: cpsw: move napi struct to cpsw_common
net: ethernet: ti: cpsw: move ale, cpts and drivers params under
cpsw_common
drivers/net/ethernet/ti/cpsw.c | 879 +++++++++++++++++++++--------------------
1 file changed, 447 insertions(+), 432 deletions(-)
--
1.9.1
next reply other threads:[~2016-08-06 22:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-06 10:48 Ivan Khoronzhuk [this message]
2016-08-06 10:48 ` [PATCH v2 01/14] net: ethernet: ti: cpsw: simplify submit routine Ivan Khoronzhuk
2016-08-09 8:09 ` Mugunthan V N
2016-08-09 11:27 ` Grygorii Strashko
2016-08-06 10:48 ` [PATCH v2 02/14] net: ethernet: ti: cpsw: remove redundant check in napi poll Ivan Khoronzhuk
2016-08-09 8:13 ` Mugunthan V N
2016-08-09 11:29 ` Grygorii Strashko
2016-08-09 12:10 ` Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 03/14] net: ethernet: ti: cpsw: remove priv from cpsw_get_slave_port() parameters list Ivan Khoronzhuk
2016-08-09 8:14 ` Mugunthan V N
2016-08-09 11:31 ` Grygorii Strashko
2016-08-06 10:48 ` [PATCH v2 04/14] net: ethernet: ti: cpsw: remove clk var from priv Ivan Khoronzhuk
2016-08-09 8:15 ` Mugunthan V N
2016-08-09 11:31 ` Grygorii Strashko
2016-08-06 10:48 ` [PATCH v2 05/14] net: ethernet: ti: cpsw: don't check slave num in runtime Ivan Khoronzhuk
2016-08-09 8:16 ` Mugunthan V N
2016-08-09 11:34 ` Grygorii Strashko
2016-08-09 12:08 ` Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 06/14] net: ethernet: ti: cpsw: create common struct to hold shared driver data Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 07/14] net: ethernet: ti: cpsw: replace pdev on dev Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 08/14] net: ethernet: ti: cpsw: move links on h/w registers to cpsw_common Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 09/14] net: ethernet: ti: cpsw: move cpdma resources " Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 10/14] net; ethernet: ti: cpsw: move irq stuff under cpsw_common Ivan Khoronzhuk
2016-08-09 15:43 ` Grygorii Strashko
2016-08-06 10:48 ` [PATCH v2 11/14] net: ethernet: ti: cpsw: move data platform data and slaves info to cpsw_common Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 12/14] net: ethernet: ti: cpsw: fix int dbg message Ivan Khoronzhuk
2016-08-06 20:24 ` Joe Perches
2016-08-06 10:48 ` [PATCH v2 13/14] net: ethernet: ti: cpsw: move napi struct to cpsw_common Ivan Khoronzhuk
2016-08-06 10:48 ` [PATCH v2 14/14] net: ethernet: ti: cpsw: move ale, cpts and drivers params under cpsw_common Ivan Khoronzhuk
2016-08-09 15:45 ` [PATCH v2 00/14] net: ethernet: ti: cpsw: split driver data and per ndev data Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470480524-6851-1-git-send-email-ivan.khoronzhuk@linaro.org \
--to=ivan.khoronzhuk@linaro.org \
--cc=dlide@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).