From: Andrew Lunn <andrew@lunn.ch>
To: David Miller <davem@davemloft.net>
Cc: Jamie Lentin <jm@lentin.co.uk>,
Florian Fainelli <f.fainelli@gmail.com>,
Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
netdev <netdev@vger.kernel.org>, Andrew Lunn <andrew@lunn.ch>
Subject: [PATCH 1/4] net: dsa: Allow the DSA driver to indicate the tag protocol
Date: Mon, 22 Aug 2016 16:01:01 +0200 [thread overview]
Message-ID: <1471874464-16142-2-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1471874464-16142-1-git-send-email-andrew@lunn.ch>
DSA drivers may drive different families of switches which need
different tag protocol. Rather than hard code the tag protocol in the
driver structure, have a callback for the DSA core to call.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/b53/b53_common.c | 7 ++++++-
drivers/net/dsa/bcm_sf2.c | 7 ++++++-
drivers/net/dsa/mv88e6060.c | 7 ++++++-
drivers/net/dsa/mv88e6xxx/chip.c | 7 ++++++-
include/net/dsa.h | 5 +++--
net/dsa/dsa.c | 5 ++++-
net/dsa/dsa2.c | 4 +++-
7 files changed, 34 insertions(+), 8 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 38ee10de7884..65ecb51f99e5 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1373,8 +1373,13 @@ static void b53_br_set_stp_state(struct dsa_switch *ds, int port,
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
+static enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_NONE;
+}
+
static struct dsa_switch_driver b53_switch_ops = {
- .tag_protocol = DSA_TAG_PROTO_NONE,
+ .get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
.set_addr = b53_set_addr,
.get_strings = b53_get_strings,
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8e6fe13dbec3..b47a74b37a42 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -136,6 +136,11 @@ static int bcm_sf2_sw_get_sset_count(struct dsa_switch *ds)
return BCM_SF2_STATS_SIZE;
}
+static enum dsa_tag_protocol bcm_sf2_sw_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_BRCM;
+}
+
static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
@@ -1577,8 +1582,8 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
}
static struct dsa_switch_driver bcm_sf2_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_BRCM,
.setup = bcm_sf2_sw_setup,
+ .get_tag_protocol = bcm_sf2_sw_get_tag_protocol,
.set_addr = bcm_sf2_sw_set_addr,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
.get_strings = bcm_sf2_sw_get_strings,
diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index e36b40886bd8..1fdfbf3a50bc 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -69,6 +69,11 @@ static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
return NULL;
}
+static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_TRAILER;
+}
+
static const char *mv88e6060_drv_probe(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **_priv)
@@ -248,7 +253,7 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
}
static struct dsa_switch_driver mv88e6060_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_TRAILER,
+ .get_tag_protocol = mv88e6060_get_tag_protocol,
.probe = mv88e6060_drv_probe,
.setup = mv88e6060_setup,
.set_addr = mv88e6060_set_addr,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 014b52bd72f1..63cad6c00bc7 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3924,6 +3924,11 @@ static int mv88e6xxx_smi_init(struct mv88e6xxx_chip *chip,
return 0;
}
+static enum dsa_tag_protocol mv88e6xxx_get_tag_protocol(struct dsa_switch *ds)
+{
+ return DSA_TAG_PROTO_EDSA;
+}
+
static const char *mv88e6xxx_drv_probe(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **priv)
@@ -3967,8 +3972,8 @@ free:
}
static struct dsa_switch_driver mv88e6xxx_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_EDSA,
.probe = mv88e6xxx_drv_probe,
+ .get_tag_protocol = mv88e6xxx_get_tag_protocol,
.setup = mv88e6xxx_setup,
.set_addr = mv88e6xxx_set_addr,
.adjust_link = mv88e6xxx_adjust_link,
diff --git a/include/net/dsa.h b/include/net/dsa.h
index d00c392bc9f8..8ca2684c5358 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -239,14 +239,15 @@ struct switchdev_obj_port_vlan;
struct dsa_switch_driver {
struct list_head list;
- enum dsa_tag_protocol tag_protocol;
-
/*
* Probing and setup.
*/
const char *(*probe)(struct device *dsa_dev,
struct device *host_dev, int sw_addr,
void **priv);
+
+ enum dsa_tag_protocol (*get_tag_protocol)(struct dsa_switch *ds);
+
int (*setup)(struct dsa_switch *ds);
int (*set_addr)(struct dsa_switch *ds, u8 *addr);
u32 (*get_phy_flags)(struct dsa_switch *ds, int port);
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 8bda74e595a5..8d3a28d4e99d 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -354,7 +354,10 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
* switch.
*/
if (dst->cpu_switch == index) {
- dst->tag_ops = dsa_resolve_tag_protocol(drv->tag_protocol);
+ enum dsa_tag_protocol tag_protocol;
+
+ tag_protocol = drv->get_tag_protocol(ds);
+ dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
if (IS_ERR(dst->tag_ops)) {
ret = PTR_ERR(dst->tag_ops);
goto out;
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index f30bad9678f0..2e343221464c 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -443,6 +443,7 @@ static int dsa_cpu_parse(struct device_node *port, u32 index,
struct dsa_switch_tree *dst,
struct dsa_switch *ds)
{
+ enum dsa_tag_protocol tag_protocol;
struct net_device *ethernet_dev;
struct device_node *ethernet;
@@ -465,7 +466,8 @@ static int dsa_cpu_parse(struct device_node *port, u32 index,
dst->cpu_port = index;
}
- dst->tag_ops = dsa_resolve_tag_protocol(ds->drv->tag_protocol);
+ tag_protocol = ds->drv->get_tag_protocol(ds);
+ dst->tag_ops = dsa_resolve_tag_protocol(tag_protocol);
if (IS_ERR(dst->tag_ops)) {
dev_warn(ds->dev, "No tagger for this switch\n");
return PTR_ERR(dst->tag_ops);
--
2.8.1
next prev parent reply other threads:[~2016-08-22 14:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-22 14:01 [PATCH 0/4] Fix MV88E6131 tagging Andrew Lunn
2016-08-22 14:01 ` Andrew Lunn [this message]
2016-08-22 14:32 ` [PATCH 1/4] net: dsa: Allow the DSA driver to indicate the tag protocol Vivien Didelot
2016-08-22 14:01 ` [PATCH 2/4] net: dsa: mv88e6xxx: Fix support for DSA tagging for older switches Andrew Lunn
2016-08-22 14:41 ` Vivien Didelot
2016-08-22 14:01 ` [PATCH 3/4] dsa: mv88e6xxx: Delete ppu timer when removing module Andrew Lunn
2016-08-22 14:51 ` Vivien Didelot
2016-08-22 15:07 ` Andrew Lunn
2016-08-22 15:39 ` Vivien Didelot
2016-08-23 13:37 ` Sergei Shtylyov
2016-08-23 14:10 ` Andrew Lunn
2016-08-22 14:01 ` [PATCH 4/4] net: mv88e6xxx: Enable PORT_CONTROL_FORWARD_UNKNOWN for DSA-tagged CPU ports Andrew Lunn
2016-08-22 15:16 ` Vivien Didelot
2016-08-22 14:36 ` [PATCH 0/4] Fix MV88E6131 tagging Jamie Lentin
2016-08-23 4:08 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471874464-16142-2-git-send-email-andrew@lunn.ch \
--to=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=jm@lentin.co.uk \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).