From: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Brian Norris
<briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Alexandre Torgue <alexandre.torgue-qxv4g6HH51o@public.gmane.org>,
dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
Douglas Anderson
<dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Roger Chen <roger.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [RESEND PATCH 1/4] net: stmmac: dwmac-rk: fixes the gmac resume after PD on/off
Date: Wed, 31 Aug 2016 14:13:45 +0800 [thread overview]
Message-ID: <1472624028-7082-2-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1472624028-7082-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
From: Roger Chen <roger.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
GMAC Power Domain(PD) will be disabled during suspend.
That will causes GRF registers reset.
So corresponding GRF registers for GMAC must be setup again.
Signed-off-by: Roger Chen <roger.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 9210591..289e7a6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -629,6 +629,16 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
"rockchip,grf");
bsp_priv->pdev = pdev;
+ gmac_clk_init(bsp_priv);
+
+ return bsp_priv;
+}
+
+static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
+{
+ int ret;
+ struct device *dev = &bsp_priv->pdev->dev;
+
/*rmii or rgmii*/
if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
dev_info(dev, "init for RGMII\n");
@@ -641,15 +651,6 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
dev_err(dev, "NO interface defined!\n");
}
- gmac_clk_init(bsp_priv);
-
- return bsp_priv;
-}
-
-static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
-{
- int ret;
-
ret = phy_power_on(bsp_priv, true);
if (ret)
return ret;
--
1.9.1
next prev parent reply other threads:[~2016-08-31 6:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-31 6:13 [RESEND PATCH 0/4] Support the rk3399 gmac pd function Caesar Wang
2016-08-31 6:13 ` [RESEND PATCH 2/4] net: stmmac: dwmac-rk: add pd_gmac support for rk3399 Caesar Wang
[not found] ` <1472624028-7082-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-31 6:13 ` Caesar Wang [this message]
2016-08-31 6:13 ` [RESEND PATCH 3/4] arm64: dts: rockchip: support gmac " Caesar Wang
[not found] ` <1472624028-7082-4-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-31 20:42 ` Doug Anderson
[not found] ` <CAD=FV=XQX__rFqGLY2U5mPT8WR4P4aW5tbCqFmA+3rZunbzUZQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-08-31 21:29 ` Heiko Stübner
2016-08-31 21:45 ` Doug Anderson
2016-08-31 6:13 ` [RESEND PATCH 4/4] arm64: dts: rockchip: enable the gmac for rk3399 evb board Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472624028-7082-2-git-send-email-wxt@rock-chips.com \
--to=wxt-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=alexandre.torgue-qxv4g6HH51o@public.gmane.org \
--cc=briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dbasehore-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=peppe.cavallaro-qxv4g6HH51o@public.gmane.org \
--cc=roger.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).