From: Philippe Reynes <tremyfr@gmail.com>
To: isubramanian@apm.com, kchudgar@apm.com, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH 1/2] net: ethernet: apm: xgene: use phydev from struct net_device
Date: Sun, 11 Sep 2016 17:54:03 +0200 [thread overview]
Message-ID: <1473609244-4365-1-git-send-email-tremyfr@gmail.com> (raw)
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy_dev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
.../net/ethernet/apm/xgene/xgene_enet_ethtool.c | 4 +-
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 24 ++++++++++----------
drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 8 +++---
drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 1 -
4 files changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
index 22a7b26..e1f44ae 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ethtool.c
@@ -57,7 +57,7 @@ static void xgene_get_drvinfo(struct net_device *ndev,
static int xgene_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct xgene_enet_pdata *pdata = netdev_priv(ndev);
- struct phy_device *phydev = pdata->phy_dev;
+ struct phy_device *phydev = ndev->phydev;
if (pdata->phy_mode == PHY_INTERFACE_MODE_RGMII) {
if (phydev == NULL)
@@ -96,7 +96,7 @@ static int xgene_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
static int xgene_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
{
struct xgene_enet_pdata *pdata = netdev_priv(ndev);
- struct phy_device *phydev = pdata->phy_dev;
+ struct phy_device *phydev = ndev->phydev;
if (pdata->phy_mode == PHY_INTERFACE_MODE_RGMII) {
if (!phydev)
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index da413c8..c481f10 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -713,7 +713,7 @@ static void xgene_enet_adjust_link(struct net_device *ndev)
{
struct xgene_enet_pdata *pdata = netdev_priv(ndev);
const struct xgene_mac_ops *mac_ops = pdata->mac_ops;
- struct phy_device *phydev = pdata->phy_dev;
+ struct phy_device *phydev = ndev->phydev;
if (phydev->link) {
if (pdata->phy_speed != phydev->speed) {
@@ -773,15 +773,13 @@ int xgene_enet_phy_connect(struct net_device *ndev)
netdev_err(ndev, "Could not connect to PHY\n");
return -ENODEV;
}
-
- pdata->phy_dev = phy_dev;
} else {
#ifdef CONFIG_ACPI
struct acpi_device *adev = acpi_phy_find_device(dev);
if (adev)
- pdata->phy_dev = adev->driver_data;
-
- phy_dev = pdata->phy_dev;
+ phy_dev = adev->driver_data;
+ else
+ phy_dev = NULL;
if (!phy_dev ||
phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link,
@@ -849,8 +847,6 @@ static int xgene_mdiobus_register(struct xgene_enet_pdata *pdata,
if (!phy)
return -EIO;
- pdata->phy_dev = phy;
-
return ret;
}
@@ -890,14 +886,18 @@ int xgene_enet_mdio_config(struct xgene_enet_pdata *pdata)
void xgene_enet_phy_disconnect(struct xgene_enet_pdata *pdata)
{
- if (pdata->phy_dev)
- phy_disconnect(pdata->phy_dev);
+ struct net_device *ndev = pdata->ndev;
+
+ if (ndev->phydev)
+ phy_disconnect(ndev->phydev);
}
void xgene_enet_mdio_remove(struct xgene_enet_pdata *pdata)
{
- if (pdata->phy_dev)
- phy_disconnect(pdata->phy_dev);
+ struct net_device *ndev = pdata->ndev;
+
+ if (ndev->phydev)
+ phy_disconnect(ndev->phydev);
mdiobus_unregister(pdata->mdio_bus);
mdiobus_free(pdata->mdio_bus);
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
index b8b9495..522ba92 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c
@@ -748,8 +748,8 @@ static int xgene_enet_open(struct net_device *ndev)
if (ret)
return ret;
- if (pdata->phy_dev) {
- phy_start(pdata->phy_dev);
+ if (ndev->phydev) {
+ phy_start(ndev->phydev);
} else {
schedule_delayed_work(&pdata->link_work, PHY_POLL_LINK_OFF);
netif_carrier_off(ndev);
@@ -772,8 +772,8 @@ static int xgene_enet_close(struct net_device *ndev)
mac_ops->tx_disable(pdata);
mac_ops->rx_disable(pdata);
- if (pdata->phy_dev)
- phy_stop(pdata->phy_dev);
+ if (ndev->phydev)
+ phy_stop(ndev->phydev);
else
cancel_delayed_work_sync(&pdata->link_work);
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
index b339fc1..7735371 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.h
@@ -174,7 +174,6 @@ struct xgene_cle_ops {
struct xgene_enet_pdata {
struct net_device *ndev;
struct mii_bus *mdio_bus;
- struct phy_device *phy_dev;
int phy_speed;
struct clk *clk;
struct platform_device *pdev;
--
1.7.4.4
next reply other threads:[~2016-09-11 15:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-11 15:54 Philippe Reynes [this message]
2016-09-11 15:54 ` [PATCH 2/2] net: ethernet: apm: xgene: use new api ethtool_{get|set}_link_ksettings Philippe Reynes
2016-09-13 15:46 ` David Miller
2016-09-13 15:45 ` [PATCH 1/2] net: ethernet: apm: xgene: use phydev from struct net_device David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1473609244-4365-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=davem@davemloft.net \
--cc=isubramanian@apm.com \
--cc=kchudgar@apm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).