From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Crispin Subject: [PATCH 0/3] net-next: dsa: add QCA8K support Date: Mon, 12 Sep 2016 10:35:34 +0200 Message-ID: <1473669337-21221-1-git-send-email-john@phrozen.org> Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org, qsdk-review@qca.qualcomm.com, John Crispin To: "David S. Miller" , Andrew Lunn , Florian Fainelli Return-path: Received: from nbd.name ([46.4.11.11]:48581 "EHLO nbd.name" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756592AbcILIgi (ORCPT ); Mon, 12 Sep 2016 04:36:38 -0400 Sender: netdev-owner@vger.kernel.org List-ID: This series is based on the AR8xxx series posted by Matthieu Olivari in may 2015. The following changes were made since then * fixed the nitpicks from the previous review * updated to latest API * turned it into an mdio device * added callbacks for fdb, bridge offloading, stp, eee, port status * fixed several minor issues to the port setup and arp learning * changed the namespacing as this driver to qca8k The driver has so far only been tested on qca8337/N. It should work on other QCA switches such as the qca8327 with minor changes. John Crispin (3): Documentation: devicetree: add qca8k binding net-next: dsa: add Qualcomm tag RX/TX handler net-next: dsa: add new driver for qca8xxx family .../devicetree/bindings/net/dsa/qca8k.txt | 53 ++ drivers/net/dsa/Kconfig | 9 + drivers/net/dsa/Makefile | 1 + drivers/net/dsa/qca8k.c | 969 ++++++++++++++++++++ drivers/net/dsa/qca8k.h | 201 ++++ include/net/dsa.h | 1 + net/dsa/Kconfig | 3 + net/dsa/Makefile | 1 + net/dsa/dsa.c | 3 + net/dsa/dsa_priv.h | 2 + net/dsa/tag_qca.c | 158 ++++ 11 files changed, 1401 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt create mode 100644 drivers/net/dsa/qca8k.c create mode 100644 drivers/net/dsa/qca8k.h create mode 100644 net/dsa/tag_qca.c -- 1.7.10.4