netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Griffin <peter.griffin@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@stlinux.com,
	patrice.chotard@st.com, devicetree@vger.kernel.org
Cc: peter.griffin@linaro.org, lee.jones@linaro.org,
	<peppe.cavallaro@st.com>, <alexandre.torgue@st.com>,
	<netdev@vger.kernel.org>
Subject: [PATCH 18/19] stmmac: dwmac-sti: Remove obsolete STi platforms
Date: Wed, 14 Sep 2016 14:27:56 +0100	[thread overview]
Message-ID: <1473859677-9231-19-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1473859677-9231-1-git-send-email-peter.griffin@linaro.org>

This patch removes support for STiH415/6 SoC's from the
dwmac-sti driver and dt binding doc, as support for these
platforms is being removed from the kernel. It also removes
STiD127 related code, which has never actually been supported
upstream.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: <peppe.cavallaro@st.com>
Cc: <alexandre.torgue@st.com>
Cc: <netdev@vger.kernel.org>
---
 .../devicetree/bindings/net/sti-dwmac.txt          |  3 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c    | 37 ----------------------
 2 files changed, 1 insertion(+), 39 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index d05c1e1..2031786 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -7,8 +7,7 @@ and what is needed on STi platforms to program the stmmac glue logic.
 The device node has following properties.
 
 Required properties:
- - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac",
-   "st,stih407-dwmac", "st,stid127-dwmac".
+ - compatible	: Should be "st,stih407-dwmac".
  - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
    encompases the glue register, and the offset of the control register.
  - st,gmac_en: this is to enable the gmac into a dedicated sysctl control
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index 58c05ac..fcbe374 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -198,36 +198,6 @@ static void stih4xx_fix_retime_src(void *priv, u32 spd)
 			   stih4xx_tx_retime_val[src]);
 }
 
-static void stid127_fix_retime_src(void *priv, u32 spd)
-{
-	struct sti_dwmac *dwmac = priv;
-	u32 reg = dwmac->ctrl_reg;
-	u32 freq = 0;
-	u32 val = 0;
-
-	if (dwmac->interface == PHY_INTERFACE_MODE_MII) {
-		val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
-	} else if (dwmac->interface == PHY_INTERFACE_MODE_RMII) {
-		if (!dwmac->ext_phyclk) {
-			val = STID127_ETH_SEL_INTERNAL_NOTEXT_PHYCLK;
-			freq = DWMAC_50MHZ;
-		}
-	} else if (IS_PHY_IF_MODE_RGMII(dwmac->interface)) {
-		val = STID127_ETH_SEL_INTERNAL_NOTEXT_TXCLK;
-		if (spd == SPEED_1000)
-			freq = DWMAC_125MHZ;
-		else if (spd == SPEED_100)
-			freq = DWMAC_25MHZ;
-		else if (spd == SPEED_10)
-			freq = DWMAC_2_5MHZ;
-	}
-
-	if (dwmac->clk && freq)
-		clk_set_rate(dwmac->clk, freq);
-
-	regmap_update_bits(dwmac->regmap, reg, STID127_RETIME_SRC_MASK, val);
-}
-
 static int sti_dwmac_init(struct platform_device *pdev, void *priv)
 {
 	struct sti_dwmac *dwmac = priv;
@@ -372,14 +342,7 @@ static const struct sti_dwmac_of_data stih4xx_dwmac_data = {
 	.fix_retime_src = stih4xx_fix_retime_src,
 };
 
-static const struct sti_dwmac_of_data stid127_dwmac_data = {
-	.fix_retime_src = stid127_fix_retime_src,
-};
-
 static const struct of_device_id sti_dwmac_match[] = {
-	{ .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
-	{ .compatible = "st,stih416-dwmac", .data = &stih4xx_dwmac_data},
-	{ .compatible = "st,stid127-dwmac", .data = &stid127_dwmac_data},
 	{ .compatible = "st,stih407-dwmac", .data = &stih4xx_dwmac_data},
 	{ }
 };
-- 
1.9.1

       reply	other threads:[~2016-09-14 13:27 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1473859677-9231-1-git-send-email-peter.griffin@linaro.org>
2016-09-14 13:27 ` Peter Griffin [this message]
2016-09-23 15:11   ` [PATCH 18/19] stmmac: dwmac-sti: Remove obsolete STi platforms Rob Herring
2016-10-18  8:05     ` Patrice Chotard
     [not found]       ` <dcbb8065-b272-0a2f-8efb-c55217712caf-qxv4g6HH51o@public.gmane.org>
2016-10-18  8:59         ` [STLinux Kernel] " Patrice Chotard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473859677-9231-19-git-send-email-peter.griffin@linaro.org \
    --to=peter.griffin@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=patrice.chotard@st.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).