netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jakub Kicinski <jakub.kicinski@netronome.com>
To: netdev@vger.kernel.org
Cc: ast@kernel.org, daniel@iogearbox.net, jiri@resnulli.us,
	john.fastabend@gmail.com, kubakici@wp.pl,
	Jakub Kicinski <jakub.kicinski@netronome.com>
Subject: [PATCHv3 net-next 03/15] net: cls_bpf: add support for marking filters as hardware-only
Date: Wed, 14 Sep 2016 20:00:11 +0100	[thread overview]
Message-ID: <1473879623-15382-4-git-send-email-jakub.kicinski@netronome.com> (raw)
In-Reply-To: <1473879623-15382-1-git-send-email-jakub.kicinski@netronome.com>

Add cls_bpf support for the TCA_CLS_FLAGS_SKIP_SW flag.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
---
 net/sched/cls_bpf.c | 34 +++++++++++++++++++++++++---------
 1 file changed, 25 insertions(+), 9 deletions(-)

diff --git a/net/sched/cls_bpf.c b/net/sched/cls_bpf.c
index 1ae5b6798363..1aad314089e9 100644
--- a/net/sched/cls_bpf.c
+++ b/net/sched/cls_bpf.c
@@ -28,7 +28,7 @@ MODULE_DESCRIPTION("TC BPF based classifier");
 
 #define CLS_BPF_NAME_LEN	256
 #define CLS_BPF_SUPPORTED_GEN_FLAGS		\
-	TCA_CLS_FLAGS_SKIP_HW
+	(TCA_CLS_FLAGS_SKIP_HW | TCA_CLS_FLAGS_SKIP_SW)
 
 struct cls_bpf_head {
 	struct list_head plist;
@@ -98,7 +98,9 @@ static int cls_bpf_classify(struct sk_buff *skb, const struct tcf_proto *tp,
 
 		qdisc_skb_cb(skb)->tc_classid = prog->res.classid;
 
-		if (at_ingress) {
+		if (tc_skip_sw(prog->gen_flags)) {
+			filter_res = prog->exts_integrated ? TC_ACT_UNSPEC : 0;
+		} else if (at_ingress) {
 			/* It is safe to push/pull even if skb_shared() */
 			__skb_push(skb, skb->mac_len);
 			bpf_compute_data_end(skb);
@@ -166,32 +168,42 @@ static int cls_bpf_offload_cmd(struct tcf_proto *tp, struct cls_bpf_prog *prog,
 					     tp->protocol, &offload);
 }
 
-static void cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog,
-			    struct cls_bpf_prog *oldprog)
+static int cls_bpf_offload(struct tcf_proto *tp, struct cls_bpf_prog *prog,
+			   struct cls_bpf_prog *oldprog)
 {
 	struct net_device *dev = tp->q->dev_queue->dev;
 	struct cls_bpf_prog *obj = prog;
 	enum tc_clsbpf_command cmd;
+	bool skip_sw;
+	int ret;
+
+	skip_sw = tc_skip_sw(prog->gen_flags) ||
+		(oldprog && tc_skip_sw(oldprog->gen_flags));
 
 	if (oldprog && oldprog->offloaded) {
 		if (tc_should_offload(dev, tp, prog->gen_flags)) {
 			cmd = TC_CLSBPF_REPLACE;
-		} else {
+		} else if (!tc_skip_sw(prog->gen_flags)) {
 			obj = oldprog;
 			cmd = TC_CLSBPF_DESTROY;
+		} else {
+			return -EINVAL;
 		}
 	} else {
 		if (!tc_should_offload(dev, tp, prog->gen_flags))
-			return;
+			return skip_sw ? -EINVAL : 0;
 		cmd = TC_CLSBPF_ADD;
 	}
 
-	if (cls_bpf_offload_cmd(tp, obj, cmd))
-		return;
+	ret = cls_bpf_offload_cmd(tp, obj, cmd);
+	if (ret)
+		return skip_sw ? ret : 0;
 
 	obj->offloaded = true;
 	if (oldprog)
 		oldprog->offloaded = false;
+
+	return 0;
 }
 
 static void cls_bpf_stop_offload(struct tcf_proto *tp,
@@ -499,7 +511,11 @@ static int cls_bpf_change(struct net *net, struct sk_buff *in_skb,
 	if (ret < 0)
 		goto errout;
 
-	cls_bpf_offload(tp, prog, oldprog);
+	ret = cls_bpf_offload(tp, prog, oldprog);
+	if (ret) {
+		cls_bpf_delete_prog(tp, prog);
+		return ret;
+	}
 
 	if (oldprog) {
 		list_replace_rcu(&oldprog->link, &prog->link);
-- 
1.9.1

  parent reply	other threads:[~2016-09-14 19:00 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-14 19:00 [PATCHv3 net-next 00/15] BPF hardware offload (cls_bpf for now) Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 01/15] net: cls_bpf: add hardware offload Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 02/15] net: cls_bpf: limit hardware offload by software-only flag Jakub Kicinski
2016-09-14 19:00 ` Jakub Kicinski [this message]
2016-09-14 19:00 ` [PATCHv3 net-next 04/15] bpf: don't (ab)use instructions to store state Jakub Kicinski
2016-09-14 22:58   ` Alexei Starovoitov
2016-09-14 19:00 ` [PATCHv3 net-next 05/15] bpf: enable non-core use of the verfier Jakub Kicinski
2016-09-14 23:05   ` Alexei Starovoitov
2016-09-15  7:52     ` Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 06/15] bpf: prefix structures in bpf_parser.h with bpf_ Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 07/15] bpf: recognize 64bit immediate loads as consts Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 08/15] nfp: add BPF to NFP code translator Jakub Kicinski
2016-09-14 23:15   ` Alexei Starovoitov
2016-09-15  7:53     ` Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 09/15] nfp: bpf: add hardware bpf offload Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 10/15] net: cls_bpf: allow offloaded filters to update stats Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 11/15] net: bpf: " Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 12/15] nfp: bpf: add packet marking support Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 13/15] net: act_mirred: allow statistic updates from offloaded actions Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 14/15] nfp: bpf: add support for legacy redirect action Jakub Kicinski
2016-09-14 19:00 ` [PATCHv3 net-next 15/15] nfp: bpf: add offload of TC direct action mode Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1473879623-15382-4-git-send-email-jakub.kicinski@netronome.com \
    --to=jakub.kicinski@netronome.com \
    --cc=ast@kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=jiri@resnulli.us \
    --cc=john.fastabend@gmail.com \
    --cc=kubakici@wp.pl \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).