From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: Jiri Pirko <jiri@mellanox.com>,
Daniel Borkmann <daniel@iogearbox.net>,
netdev@vger.kernel.org,
Shmulik Ladkani <shmulik.ladkani@gmail.com>,
Pravin Shelar <pshelar@ovn.org>
Subject: [PATCH v2 1/2] net: skbuff: Remove errornous length validation in skb_vlan_pop()
Date: Mon, 19 Sep 2016 18:53:19 +0300 [thread overview]
Message-ID: <1474300400-32362-1-git-send-email-shmulik.ladkani@gmail.com> (raw)
In 93515d53b1
"net: move vlan pop/push functions into common code"
skb_vlan_pop was moved from its private location in openvswitch to
skbuff common code.
In case !vlan_tx_tag_present, the original 'pop_vlan()' assured
that skb->len is sufficient (if skb->len < VLAN_ETH_HLEN then pop was a
no-op).
This validation was moved as is into the new common 'skb_vlan_pop'.
Alas, in its original location (openvswitch), there was a guarantee that
'data' points to the mac_header, therefore the 'skb->len < VLAN_ETH_HLEN'
condition made sense.
However there's no such guarantee in the generic 'skb_vlan_pop'.
For short packets received in rx path going through 'skb_vlan_pop',
this causes 'skb_vlan_pop' to fail pop-ing a valid vlan hdr (in the non
hw-accel case) or to fail moving next tag into hw-accel tag.
Remove the 'skb->len < VLAN_ETH_HLEN' condition entirely:
It is superfluous since inner '__skb_vlan_pop' already verifies there
are VLAN_ETH_HLEN writable bytes at the mac_header.
Fixes: 93515d53b1 ("net: move vlan pop/push functions into common code")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Cc: Pravin Shelar <pshelar@ovn.org>
---
net/core/skbuff.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 1e329d4112..4dbaedb745 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4535,9 +4535,8 @@ int skb_vlan_pop(struct sk_buff *skb)
if (likely(skb_vlan_tag_present(skb))) {
skb->vlan_tci = 0;
} else {
- if (unlikely((skb->protocol != htons(ETH_P_8021Q) &&
- skb->protocol != htons(ETH_P_8021AD)) ||
- skb->len < VLAN_ETH_HLEN))
+ if (unlikely(skb->protocol != htons(ETH_P_8021Q) &&
+ skb->protocol != htons(ETH_P_8021AD)))
return 0;
err = __skb_vlan_pop(skb, &vlan_tci);
@@ -4545,9 +4544,8 @@ int skb_vlan_pop(struct sk_buff *skb)
return err;
}
/* move next vlan tag to hw accel tag */
- if (likely((skb->protocol != htons(ETH_P_8021Q) &&
- skb->protocol != htons(ETH_P_8021AD)) ||
- skb->len < VLAN_ETH_HLEN))
+ if (likely(skb->protocol != htons(ETH_P_8021Q) &&
+ skb->protocol != htons(ETH_P_8021AD)))
return 0;
vlan_proto = skb->protocol;
--
2.7.4
next reply other threads:[~2016-09-19 15:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-19 15:53 Shmulik Ladkani [this message]
2016-09-19 15:53 ` [PATCH v2 2/2] net: skbuff: Coding: Use eth_type_vlan() instead of open coding it Shmulik Ladkani
2016-09-19 16:20 ` Eric Dumazet
2016-09-19 16:23 ` Shmulik Ladkani
2016-09-19 17:37 ` Eric Dumazet
2016-09-19 16:28 ` [PATCH v2 1/2] net: skbuff: Remove errornous length validation in skb_vlan_pop() Shmulik Ladkani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474300400-32362-1-git-send-email-shmulik.ladkani@gmail.com \
--to=shmulik.ladkani@gmail.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=jiri@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=pshelar@ovn.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).