netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
	netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com,
	jogreene@redhat.com, guru.anbalagane@oracle.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 10/15] i40e: Fix Flow Director raw_buf cleanup
Date: Sat, 24 Sep 2016 23:42:44 -0700	[thread overview]
Message-ID: <1474785769-54665-11-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1474785769-54665-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: Alexander Duyck <alexander.h.duyck@intel.com>

The Tx cleanup flow was incorrectly assuming it could check for the flow
director bits after it had unmapped the buffer.  However in this case it
results in us trying to free a raw_buf as though it is an sk_buff.

To fix this I am moving up the flag test for the FD_SB bit so that when
find a non-NULL skb or raw_buf value we then check the flag and use the
appropriate call to free the buffer.

Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 8 ++++----
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 7ada05e..a2077be 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -532,7 +532,10 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 					    struct i40e_tx_buffer *tx_buffer)
 {
 	if (tx_buffer->skb) {
-		dev_kfree_skb_any(tx_buffer->skb);
+		if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
+			kfree(tx_buffer->raw_buf);
+		else
+			dev_kfree_skb_any(tx_buffer->skb);
 		if (dma_unmap_len(tx_buffer, len))
 			dma_unmap_single(ring->dev,
 					 dma_unmap_addr(tx_buffer, dma),
@@ -545,9 +548,6 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 			       DMA_TO_DEVICE);
 	}
 
-	if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
-		kfree(tx_buffer->raw_buf);
-
 	tx_buffer->next_to_watch = NULL;
 	tx_buffer->skb = NULL;
 	dma_unmap_len_set(tx_buffer, len, 0);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index e3427eb..cb6b130 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -51,7 +51,10 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 					    struct i40e_tx_buffer *tx_buffer)
 {
 	if (tx_buffer->skb) {
-		dev_kfree_skb_any(tx_buffer->skb);
+		if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
+			kfree(tx_buffer->raw_buf);
+		else
+			dev_kfree_skb_any(tx_buffer->skb);
 		if (dma_unmap_len(tx_buffer, len))
 			dma_unmap_single(ring->dev,
 					 dma_unmap_addr(tx_buffer, dma),
@@ -64,9 +67,6 @@ static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
 			       DMA_TO_DEVICE);
 	}
 
-	if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
-		kfree(tx_buffer->raw_buf);
-
 	tx_buffer->next_to_watch = NULL;
 	tx_buffer->skb = NULL;
 	dma_unmap_len_set(tx_buffer, len, 0);
-- 
2.7.4

  parent reply	other threads:[~2016-09-25  6:42 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-25  6:42 [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-09-24 Jeff Kirsher
2016-09-25  6:42 ` [net-next 01/15] i40e: Remove 100 Mbps SGMII support for X722 Jeff Kirsher
2016-09-25  6:42 ` [net-next 02/15] i40e: fix deleting mac filters Jeff Kirsher
2016-09-25  6:42 ` [net-next 03/15] i40e: add encap csum VF offload flag Jeff Kirsher
2016-09-25  6:42 ` [net-next 04/15] i40e: cleanup ATR auto_disable_flags use Jeff Kirsher
2016-09-25  6:42 ` [net-next 05/15] i40e: check conflicting ntuple/sideband rules when re-enabling ATR Jeff Kirsher
2016-09-25  6:42 ` [net-next 06/15] i40e: removing unreachable code Jeff Kirsher
2016-09-25  6:42 ` [net-next 07/15] i40e/i40evf: Changed version to 1.6.16 Jeff Kirsher
2016-09-25  6:42 ` [net-next 08/15] i40e: Increase minimum number of allocated VSI Jeff Kirsher
2016-09-25  6:42 ` [net-next 09/15] i40evf: enable adaptive interrupt throttling Jeff Kirsher
2016-09-25  6:42 ` Jeff Kirsher [this message]
2016-09-25  6:42 ` [net-next 11/15] i40e/i40evf: Add txring_txq function to match fm10k and ixgbe Jeff Kirsher
2016-09-25  6:42 ` [net-next 12/15] i40e: Split Flow Director descriptor config into separate function Jeff Kirsher
2016-09-25  6:42 ` [net-next 13/15] i40e: Strip out debugfs hook for Flow Director filter programming Jeff Kirsher
2016-09-25  6:42 ` [net-next 14/15] i40e: don't configure zero-size RSS table Jeff Kirsher
2016-09-25  6:42 ` [net-next 15/15] i40evf: support queue-specific settings for interrupt moderation Jeff Kirsher
2016-09-25 10:01 ` [net-next 00/15][pull request] 40GbE Intel Wired LAN Driver Updates 2016-09-24 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474785769-54665-11-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=guru.anbalagane@oracle.com \
    --cc=jogreene@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=nhorman@redhat.com \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).