From: David Lebrun <david.lebrun@uclouvain.be>
To: <netdev@vger.kernel.org>
Cc: David Lebrun <david.lebrun@uclouvain.be>
Subject: [PATCH 6/9] ipv6: sr: add calls to verify and insert HMAC signatures
Date: Mon, 17 Oct 2016 16:43:39 +0200 [thread overview]
Message-ID: <1476715422-19151-2-git-send-email-david.lebrun@uclouvain.be> (raw)
In-Reply-To: <1476715350-18983-1-git-send-email-david.lebrun@uclouvain.be>
This patch enables the verification of the HMAC signature for transiting
SR-enabled packets, and its insertion on encapsulated/injected SRH.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
---
net/ipv6/exthdrs.c | 6 ++++++
net/ipv6/seg6_iptunnel.c | 13 +++++++++++++
2 files changed, 19 insertions(+)
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index b31f811..73b3743 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -49,6 +49,7 @@
#endif
#ifdef CONFIG_IPV6_SEG6
#include <linux/seg6.h>
+#include <net/seg6_hmac.h>
#endif
#include <linux/uaccess.h>
@@ -313,6 +314,11 @@ static int ipv6_srh_rcv(struct sk_buff *skb)
return -1;
}
+ if (!seg6_hmac_validate_skb(skb)) {
+ kfree_skb(skb);
+ return -1;
+ }
+
looped_back:
last_addr = hdr->segments;
diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 461375c..a32a7ff 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -109,12 +109,19 @@ static int seg6_do_srh_encap(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
hdr->daddr = isrh->segments[isrh->first_segment];
set_tun_src(net, skb->dev, &hdr->daddr, &hdr->saddr);
+ if (sr_get_flags(isrh) & SR6_FLAG_HMAC) {
+ err = seg6_push_hmac(net, &hdr->saddr, isrh);
+ if (unlikely(err))
+ return err;
+ }
+
return 0;
}
/* insert an SRH within an IPv6 packet, just after the IPv6 header */
static int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
{
+ struct net *net = dev_net(skb_dst(skb)->dev);
struct ipv6hdr *hdr, *oldhdr;
struct ipv6_sr_hdr *isrh;
int hdrlen, err;
@@ -144,6 +151,12 @@ static int seg6_do_srh_inline(struct sk_buff *skb, struct ipv6_sr_hdr *osrh)
isrh->segments[0] = hdr->daddr;
hdr->daddr = isrh->segments[isrh->first_segment];
+ if (sr_get_flags(isrh) & SR6_FLAG_HMAC) {
+ err = seg6_push_hmac(net, &hdr->saddr, isrh);
+ if (unlikely(err))
+ return err;
+ }
+
return 0;
}
--
2.7.3
next prev parent reply other threads:[~2016-10-17 14:51 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-17 14:42 [PATCH 0/9] net: add support for IPv6 Segment Routing David Lebrun
2016-10-17 14:42 ` [PATCH 1/9] ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header) David Lebrun
2016-10-17 14:57 ` David Miller
2016-10-17 15:04 ` David Lebrun
2016-10-17 17:01 ` Tom Herbert
2016-10-18 11:43 ` David Lebrun
2016-10-20 13:04 ` David Lebrun
2016-10-20 15:47 ` Tom Herbert
2016-10-17 17:31 ` Tom Herbert
2016-10-17 14:42 ` [PATCH 2/9] ipv6: sr: add code base for control plane support of SR-IPv6 David Lebrun
2016-10-17 15:00 ` David Miller
2016-10-17 15:06 ` David Lebrun
2016-10-17 15:21 ` David Miller
2016-10-17 17:07 ` Tom Herbert
2016-10-18 11:45 ` David Lebrun
2016-10-17 14:42 ` [PATCH 3/9] ipv6: sr: add support for SRH encapsulation and injection with lwtunnels David Lebrun
2016-10-17 17:17 ` Tom Herbert
2016-10-18 11:47 ` David Lebrun
2016-10-17 14:42 ` [PATCH 4/9] ipv6: sr: add core files for SR HMAC support David Lebrun
2016-10-17 17:24 ` Tom Herbert
2016-10-18 12:07 ` David Lebrun
2016-10-19 13:20 ` zhuyj
2016-10-19 14:43 ` David Laight
2016-10-17 14:43 ` [PATCH 5/9] ipv6: sr: implement API to control SR HMAC structures David Lebrun
2016-10-17 14:43 ` David Lebrun [this message]
2016-10-17 14:43 ` [PATCH 7/9] ipv6: add source address argument for ipv6_push_nfrag_opts David Lebrun
2016-10-17 14:43 ` [PATCH 8/9] ipv6: sr: add support for SRH injection through setsockopt David Lebrun
2016-10-17 14:43 ` [PATCH 9/9] ipv6: sr: add documentation file for per-interface sysctls David Lebrun
2016-10-17 15:09 ` [PATCH 0/9] net: add support for IPv6 Segment Routing David Laight
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1476715422-19151-2-git-send-email-david.lebrun@uclouvain.be \
--to=david.lebrun@uclouvain.be \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).