From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zach Brown Subject: [PATCH v5 3/4] net: phy: Create phy_supported_speeds function which lists speeds currently supported by a phydevice Date: Mon, 17 Oct 2016 10:49:54 -0500 Message-ID: <1476719395-28273-4-git-send-email-zach.brown@ni.com> References: <1476719395-28273-1-git-send-email-zach.brown@ni.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: devel@driverdev.osuosl.org, florian.c.schilhabel@googlemail.com, andrew@lunn.ch, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, rpurdie@rpsys.net, gregkh@linuxfoundation.org, Larry.Finger@lwfinger.net, j.anaszewski@samsung.com, linux-leds@vger.kernel.org, mlindner@marvell.com To: Return-path: In-Reply-To: <1476719395-28273-1-git-send-email-zach.brown@ni.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: driverdev-devel-bounces@linuxdriverproject.org Sender: "devel" List-Id: netdev.vger.kernel.org phy_supported_speeds provides a means to get a list of all the speeds a phy device currently supports. Signed-off-by: Zach Brown --- drivers/net/phy/phy.c | 35 +++++++++++++++++++++++++++++++++++ include/linux/phy.h | 15 +++++++++++++++ 2 files changed, 50 insertions(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index f5721db..82ee233 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -261,6 +261,41 @@ static inline unsigned int phy_find_valid(unsigned int idx, u32 features) } /** + * phy_supported_speeds - return all speeds currently supported by a phy device + * @phy: The phy device to return supported speeds of. + * @speeds: buffer to store supported speeds in. + * @size: size of speeds buffer. + * + * Description: Returns the number of supported speeds, and fills the speeds + * buffer with the supported speeds. If speeds buffer is too small to contain + * all currently supported speeds, will return as many speeds as can fit. + */ +unsigned int phy_supported_speeds(struct phy_device *phy, + unsigned int *speeds, + unsigned int size) +{ + unsigned int count = 0; + unsigned int idx = 0; + + while (idx < MAX_NUM_SETTINGS && count < size) { + idx = phy_find_valid(idx, phy->supported); + + if (!(settings[idx].setting & phy->supported)) + break; + + /* Assumes settings are grouped by speed */ + if ((count == 0) || + (speeds[count - 1] != settings[idx].speed)) { + speeds[count] = settings[idx].speed; + count++; + } + idx++; + } + + return count; +} + +/** * phy_check_valid - check if there is a valid PHY setting which matches * speed, duplex, and feature mask * @speed: speed to match diff --git a/include/linux/phy.h b/include/linux/phy.h index e25f183..8761f30 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -85,6 +85,21 @@ typedef enum { } phy_interface_t; /** + * phy_supported_speeds - return all speeds currently supported by a phy device + * @phy: The phy device to return supported speeds of. + * @speeds: buffer to store supported speeds in. + * @size: size of speeds buffer. + * + * Description: Returns the number of supported speeds, and + * fills the speeds * buffer with the supported speeds. If speeds buffer is + * too small to contain * all currently supported speeds, will return as + * many speeds as can fit. + */ +unsigned int phy_supported_speeds(struct phy_device *phy, + unsigned int *speeds, + unsigned int size); + +/** * It maps 'enum phy_interface_t' found in include/linux/phy.h * into the device tree binding of 'phy-mode', so that Ethernet * device driver can get phy interface from device tree. -- 2.7.4