netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: linux-kernel@vger.kernel.org, xen-devel@lists.xen.org
Cc: david.vrabel@citrix.com, boris.ostrovsky@oracle.com,
	Juergen Gross <jgross@suse.com>,
	wei.liu2@citrix.com, paul.durrant@citrix.com,
	netdev@vger.kernel.org
Subject: [PATCH 06/12] xen: make use of xenbus_read_unsigned() in xen-netback
Date: Mon, 31 Oct 2016 17:48:24 +0100	[thread overview]
Message-ID: <1477932510-28594-7-git-send-email-jgross@suse.com> (raw)
In-Reply-To: <1477932510-28594-1-git-send-email-jgross@suse.com>

Use xenbus_read_unsigned() instead of xenbus_scanf() when possible.
This requires to change the type of some reads from int to unsigned,
but these cases have been wrong before: negative values are not allowed
for the modified cases.

Cc: wei.liu2@citrix.com
Cc: paul.durrant@citrix.com
Cc: netdev@vger.kernel.org

Signed-off-by: Juergen Gross <jgross@suse.com>
---
 drivers/net/xen-netback/xenbus.c | 50 +++++++++++-----------------------------
 1 file changed, 14 insertions(+), 36 deletions(-)

diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 8674e18..7356e00 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -785,12 +785,9 @@ static void xen_mcast_ctrl_changed(struct xenbus_watch *watch,
 	struct xenvif *vif = container_of(watch, struct xenvif,
 					  mcast_ctrl_watch);
 	struct xenbus_device *dev = xenvif_to_xenbus_device(vif);
-	int val;
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend,
-			 "request-multicast-control", "%d", &val) < 0)
-		val = 0;
-	vif->multicast_control = !!val;
+	vif->multicast_control = !!xenbus_read_unsigned(dev->otherend,
+					"request-multicast-control", 0);
 }
 
 static int xen_register_mcast_ctrl_watch(struct xenbus_device *dev,
@@ -934,12 +931,9 @@ static void connect(struct backend_info *be)
 	/* Check whether the frontend requested multiple queues
 	 * and read the number requested.
 	 */
-	err = xenbus_scanf(XBT_NIL, dev->otherend,
-			   "multi-queue-num-queues",
-			   "%u", &requested_num_queues);
-	if (err < 0) {
-		requested_num_queues = 1; /* Fall back to single queue */
-	} else if (requested_num_queues > xenvif_max_queues) {
+	requested_num_queues = xenbus_read_unsigned(dev->otherend,
+					"multi-queue-num-queues", 1);
+	if (requested_num_queues > xenvif_max_queues) {
 		/* buggy or malicious guest */
 		xenbus_dev_fatal(dev, err,
 				 "guest requested %u queues, exceeding the maximum of %u.",
@@ -1134,7 +1128,7 @@ static int read_xenbus_vif_flags(struct backend_info *be)
 	struct xenvif *vif = be->vif;
 	struct xenbus_device *dev = be->dev;
 	unsigned int rx_copy;
-	int err, val;
+	int err;
 
 	err = xenbus_scanf(XBT_NIL, dev->otherend, "request-rx-copy", "%u",
 			   &rx_copy);
@@ -1150,10 +1144,7 @@ static int read_xenbus_vif_flags(struct backend_info *be)
 	if (!rx_copy)
 		return -EOPNOTSUPP;
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend,
-			 "feature-rx-notify", "%d", &val) < 0)
-		val = 0;
-	if (!val) {
+	if (!xenbus_read_unsigned(dev->otherend, "feature-rx-notify", 0)) {
 		/* - Reduce drain timeout to poll more frequently for
 		 *   Rx requests.
 		 * - Disable Rx stall detection.
@@ -1162,34 +1153,21 @@ static int read_xenbus_vif_flags(struct backend_info *be)
 		be->vif->stall_timeout = 0;
 	}
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-sg",
-			 "%d", &val) < 0)
-		val = 0;
-	vif->can_sg = !!val;
+	vif->can_sg = !!xenbus_read_unsigned(dev->otherend, "feature-sg", 0);
 
 	vif->gso_mask = 0;
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-gso-tcpv4",
-			 "%d", &val) < 0)
-		val = 0;
-	if (val)
+	if (xenbus_read_unsigned(dev->otherend, "feature-gso-tcpv4", 0))
 		vif->gso_mask |= GSO_BIT(TCPV4);
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-gso-tcpv6",
-			 "%d", &val) < 0)
-		val = 0;
-	if (val)
+	if (xenbus_read_unsigned(dev->otherend, "feature-gso-tcpv6", 0))
 		vif->gso_mask |= GSO_BIT(TCPV6);
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-no-csum-offload",
-			 "%d", &val) < 0)
-		val = 0;
-	vif->ip_csum = !val;
+	vif->ip_csum = !xenbus_read_unsigned(dev->otherend,
+					     "feature-no-csum-offload", 0);
 
-	if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-ipv6-csum-offload",
-			 "%d", &val) < 0)
-		val = 0;
-	vif->ipv6_csum = !!val;
+	vif->ipv6_csum = !!xenbus_read_unsigned(dev->otherend,
+						"feature-ipv6-csum-offload", 0);
 
 	return 0;
 }
-- 
2.6.6

  reply	other threads:[~2016-10-31 16:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-31 16:48 [PATCH 00/12] xen: add common function for reading optional value Juergen Gross
2016-10-31 16:48 ` Juergen Gross [this message]
2016-11-01  9:42   ` [PATCH 06/12] xen: make use of xenbus_read_unsigned() in xen-netback Paul Durrant
2016-10-31 16:48 ` [PATCH 07/12] xen: make use of xenbus_read_unsigned() in xen-netfront Juergen Gross
2016-10-31 17:08 ` [PATCH 00/12] xen: add common function for reading optional value David Miller
2016-11-01  4:33   ` Juergen Gross
2016-11-07 11:08 ` David Vrabel
     [not found]   ` <8d314b86-4a28-5628-2a79-842a2fafc4c1-Sxgqhf6Nn4DQT0dZR+AlfA@public.gmane.org>
2016-11-07 16:20     ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1477932510-28594-7-git-send-email-jgross@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=david.vrabel@citrix.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=paul.durrant@citrix.com \
    --cc=wei.liu2@citrix.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).