From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Andersson Subject: [PATCH v5 5/5] wcn36xx: Don't use the destroyed hal_mutex Date: Mon, 14 Nov 2016 22:06:54 -0800 Message-ID: <1479190014-11297-5-git-send-email-bjorn.andersson@linaro.org> References: <1479190014-11297-1-git-send-email-bjorn.andersson@linaro.org> Cc: wcn36xx@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross To: Eugene Krasnikov , Kalle Valo Return-path: In-Reply-To: <1479190014-11297-1-git-send-email-bjorn.andersson@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org ieee80211_unregister_hw() might invoke operations to stop the interface, that uses the hal_mutex. So don't destroy it until after we're done using it. Signed-off-by: Bjorn Andersson --- With this patch I can successfully (although with a SMD send timeout in the shutdown path) start and stop the WCNSS PIL/remoteproc multiple times and the wlan0 interface will come and go accordingly. Will submit the necessary DT patches soon as well. Changes since v4: - New patch drivers/net/wireless/ath/wcn36xx/main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index 96a9584edcbb..0002190c9041 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1241,7 +1241,6 @@ static int wcn36xx_remove(struct platform_device *pdev) wcn36xx_dbg(WCN36XX_DBG_MAC, "platform remove\n"); release_firmware(wcn->nv); - mutex_destroy(&wcn->hal_mutex); ieee80211_unregister_hw(hw); @@ -1250,6 +1249,8 @@ static int wcn36xx_remove(struct platform_device *pdev) iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); + + mutex_destroy(&wcn->hal_mutex); ieee80211_free_hw(hw); return 0; -- 2.5.0