From: Johan Hovold <johan@kernel.org>
To: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>,
linux-omap@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, Johan Hovold <johan@kernel.org>
Subject: [PATCH net v2 1/7] net: ethernet: ti: cpsw: fix bad register access in probe error path
Date: Thu, 17 Nov 2016 17:39:58 +0100 [thread overview]
Message-ID: <1479400804-9847-2-git-send-email-johan@kernel.org> (raw)
In-Reply-To: <1479400804-9847-1-git-send-email-johan@kernel.org>
Make sure to keep the platform device runtime-resumed throughout probe
to avoid accessing the CPSW registers in the error path (e.g. for
deferred probe) with clocks disabled:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0872d08
...
[<c04fabcc>] (cpsw_ale_control_set) from [<c04fb8b4>] (cpsw_ale_destroy+0x2c/0x44)
[<c04fb8b4>] (cpsw_ale_destroy) from [<c04fea58>] (cpsw_probe+0xbd0/0x10c4)
[<c04fea58>] (cpsw_probe) from [<c047b2a0>] (platform_drv_probe+0x5c/0xc0)
Fixes: df828598a755 ("netdev: driver: ethernet: Add TI CPSW driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/net/ethernet/ti/cpsw.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index c6cff3d2ff05..f60f8ab7c1e3 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2641,13 +2641,12 @@ static int cpsw_probe(struct platform_device *pdev)
goto clean_runtime_disable_ret;
}
cpsw->version = readl(&cpsw->regs->id_ver);
- pm_runtime_put_sync(&pdev->dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
cpsw->wr_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(cpsw->wr_regs)) {
ret = PTR_ERR(cpsw->wr_regs);
- goto clean_runtime_disable_ret;
+ goto clean_pm_runtime_put_ret;
}
memset(&dma_params, 0, sizeof(dma_params));
@@ -2684,7 +2683,7 @@ static int cpsw_probe(struct platform_device *pdev)
default:
dev_err(priv->dev, "unknown version 0x%08x\n", cpsw->version);
ret = -ENODEV;
- goto clean_runtime_disable_ret;
+ goto clean_pm_runtime_put_ret;
}
for (i = 0; i < cpsw->data.slaves; i++) {
struct cpsw_slave *slave = &cpsw->slaves[i];
@@ -2713,7 +2712,7 @@ static int cpsw_probe(struct platform_device *pdev)
if (!cpsw->dma) {
dev_err(priv->dev, "error initializing dma\n");
ret = -ENOMEM;
- goto clean_runtime_disable_ret;
+ goto clean_pm_runtime_put_ret;
}
cpsw->txch[0] = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0);
@@ -2815,12 +2814,16 @@ static int cpsw_probe(struct platform_device *pdev)
}
}
+ pm_runtime_put(&pdev->dev);
+
return 0;
clean_ale_ret:
cpsw_ale_destroy(cpsw->ale);
clean_dma_ret:
cpdma_ctlr_destroy(cpsw->dma);
+clean_pm_runtime_put_ret:
+ pm_runtime_put_sync(&pdev->dev);
clean_runtime_disable_ret:
pm_runtime_disable(&pdev->dev);
clean_ndev_ret:
--
2.7.3
next prev parent reply other threads:[~2016-11-17 16:39 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-17 16:39 [PATCH net v2 0/7] net: cpsw: fix leaks and probe deferral Johan Hovold
2016-11-17 16:39 ` Johan Hovold [this message]
2016-11-17 16:39 ` [PATCH net v2 2/7] net: ethernet: ti: cpsw: fix mdio device reference leak Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 3/7] net: ethernet: ti: cpsw: fix deferred probe Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 4/7] net: ethernet: ti: cpsw: fix of_node and phydev leaks Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 5/7] net: ethernet: ti: cpsw: fix secondary-emac probe error path Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 6/7] net: ethernet: ti: cpsw: add missing sanity check Johan Hovold
2016-11-17 16:40 ` [PATCH net v2 7/7] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral Johan Hovold
2016-11-17 17:04 ` David Miller
2016-11-17 17:19 ` Johan Hovold
2016-11-18 9:33 ` Johan Hovold
2016-11-18 18:48 ` David Miller
2016-11-18 18:49 ` [PATCH net v2 0/7] net: cpsw: fix leaks and " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479400804-9847-2-git-send-email-johan@kernel.org \
--to=johan@kernel.org \
--cc=grygorii.strashko@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mugunthanvnm@ti.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).