[PATCHv2 net-next 01/11] net: dsa: mv88e6xxx: Take switch out of reset before probe

[Andrew Lunn <andrew@lunn.ch>]

The switch needs to be taken out of reset before we can read its ID
register on the MDIO bus.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index e30d0eaf2b5f..062b9128a58d 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3855,16 +3855,16 @@ static int mv88e6xxx_probe(struct mdio_device *mdiodev)
 	if (err)
 		return err;
 
+	chip->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(chip->reset))
+		return PTR_ERR(chip->reset);
+
 	err = mv88e6xxx_detect(chip);
 	if (err)
 		return err;
 
 	mv88e6xxx_phy_init(chip);
 
-	chip->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
-	if (IS_ERR(chip->reset))
-		return PTR_ERR(chip->reset);
-
 	if (chip->info->ops->get_eeprom &&
 	    !of_property_read_u32(np, "eeprom-length", &eeprom_len))
 		chip->eeprom_len = eeprom_len;
-- 
2.10.2