From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Allan W. Nielsen" Subject: [PATCH ethtool v5 0/2] Adding downshift support to ethtool Date: Thu, 24 Nov 2016 09:56:49 +0100 Message-ID: <1479977811-5603-1-git-send-email-allan.nielsen@microsemi.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , To: Return-path: Received: from mail-co1nam03on0068.outbound.protection.outlook.com ([104.47.40.68]:4544 "EHLO NAM03-CO1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S934820AbcKXI5K (ORCPT ); Thu, 24 Nov 2016 03:57:10 -0500 Sender: netdev-owner@vger.kernel.org List-ID: (downshift feature is applied in the net-next tree - d3c19c0a72) This series adds support for downshift (using phy-tunables). Downshifting can either be turned on/off, or it can be configured to a specifc count. "count" is optional. Change set: v1: - Initial version of set/get phy tunable with downshift feature. v2: - (ethtool) Syntax is changed from "--set-phy-tunable downshift on|off|%d" to "--set-phy-tunable [downshift on|off [count N]]" - as requested by Andrew. v3: - Fixed Spelling in "ethtool-copy.h:sync with net" - Fixed "if send_ioctl() returns an error, print the error message and then still print th value of count". v4: - Fixing spelling in the example included in the commit message - Improve the description in the man-page v5: - re-sync ethtool.h from the net-next tree. Allan W. Nielsen (1): ethtool-copy.h:sync with net-next Raju Lakkaraju (1): Ethtool: Implements ETHTOOL_PHY_GTUNABLE/ETHTOOL_PHY_STUNABLE and PHY downshift ethtool-copy.h | 21 +++++++-- ethtool.8.in | 40 ++++++++++++++++ ethtool.c | 144 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 202 insertions(+), 3 deletions(-) -- 2.7.3