From: Jiri Pirko <jiri@resnulli.us>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, nogahf@mellanox.com, idosch@mellanox.com,
eladr@mellanox.com, yotamg@mellanox.com, arkadis@mellanox.com,
ogerlitz@mellanox.com
Subject: [patch net-next 00/19] mlxsw: traps, trap groups and policers
Date: Fri, 25 Nov 2016 10:33:28 +0100 [thread overview]
Message-ID: <1480066427-3961-1-git-send-email-jiri@resnulli.us> (raw)
From: Jiri Pirko <jiri@mellanox.com>
Nogah says:
For a packet to be sent from the HW to the cpu, it needs to be trapped.
For a trap to be activate it should be assigned to a trap group.
Those trap groups can have policers, to limit the packet rate (the max
number of packets that can be sent to the cpu in a time slot, the rest
will be discarded) or the data rate (the same, but the count is not by the
number of packets but by their total length in bytes).
This patchset rearrange the trap setting API, re-write the traps and the
trap groups list in spectrum and assign them policers.
Nogah Frankel (19):
mlxsw: spectrum: Remove unused traps
mlxsw: core: Create a generic function to register / unregister traps
mlxsw: core: Expose generic macros for rx trap
mlxsw: spectrum: Use generic listener struct for rx traps
mlxsw: switchx2: Use generic listener struct for rx traps
mlxsw: core: Introduce generic macro for event
mlxsw: spectrum: Use generic listener struct for events
mlxsw: switchx2: Use generic listener struct for events
mlxsw: switchib: Use generic listener struct for events
mlxsw: Change trap set function
mlxsw: Add option to choose trap group
mlxsw: core: Change emad trap group settings
mlxsw: resources: Add max trap groups resource
mlxsw: Change trap groups setting
mlxsw: spectrum: Add BGP trap
mlxsw: Create a different trap group list for each device
mlxsw: resources: Add max cpu policers resource
mlxsw: reg: Add QoS Policer Configuration Register
mlxsw: spectrum: Add policers for trap groups
drivers/net/ethernet/mellanox/mlxsw/core.c | 116 ++++++---
drivers/net/ethernet/mellanox/mlxsw/core.h | 52 ++++
drivers/net/ethernet/mellanox/mlxsw/reg.h | 231 +++++++++++++----
drivers/net/ethernet/mellanox/mlxsw/resources.h | 4 +
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 322 ++++++++++++++----------
drivers/net/ethernet/mellanox/mlxsw/switchib.c | 78 +++---
drivers/net/ethernet/mellanox/mlxsw/switchx2.c | 229 +++++------------
drivers/net/ethernet/mellanox/mlxsw/trap.h | 1 +
8 files changed, 625 insertions(+), 408 deletions(-)
--
2.7.4
next reply other threads:[~2016-11-25 9:34 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-25 9:33 Jiri Pirko [this message]
2016-11-25 9:33 ` [patch net-next 01/19] mlxsw: spectrum: Remove unused traps Jiri Pirko
2016-11-25 9:33 ` [patch net-next 02/19] mlxsw: core: Create a generic function to register / unregister traps Jiri Pirko
2016-11-25 9:33 ` [patch net-next 03/19] mlxsw: core: Expose generic macros for rx trap Jiri Pirko
2016-11-25 9:33 ` [patch net-next 04/19] mlxsw: spectrum: Use generic listener struct for rx traps Jiri Pirko
2016-11-25 9:33 ` [patch net-next 05/19] mlxsw: switchx2: " Jiri Pirko
2016-11-25 9:33 ` [patch net-next 06/19] mlxsw: core: Introduce generic macro for event Jiri Pirko
2016-11-25 9:33 ` [patch net-next 07/19] mlxsw: spectrum: Use generic listener struct for events Jiri Pirko
2016-11-25 9:33 ` [patch net-next 08/19] mlxsw: switchx2: " Jiri Pirko
2016-11-25 9:33 ` [patch net-next 09/19] mlxsw: switchib: " Jiri Pirko
2016-11-25 9:33 ` [patch net-next 10/19] mlxsw: Change trap set function Jiri Pirko
2016-11-25 9:33 ` [patch net-next 11/19] mlxsw: Add option to choose trap group Jiri Pirko
2016-11-25 9:33 ` [patch net-next 12/19] mlxsw: core: Change emad trap group settings Jiri Pirko
2016-11-25 9:33 ` [patch net-next 13/19] mlxsw: resources: Add max trap groups resource Jiri Pirko
2016-11-25 9:33 ` [patch net-next 14/19] mlxsw: Change trap groups setting Jiri Pirko
2016-11-25 9:33 ` [patch net-next 15/19] mlxsw: spectrum: Add BGP trap Jiri Pirko
2016-11-25 9:33 ` [patch net-next 16/19] mlxsw: Create a different trap group list for each device Jiri Pirko
2016-11-25 9:33 ` [patch net-next 17/19] mlxsw: resources: Add max cpu policers resource Jiri Pirko
2016-11-25 9:33 ` [patch net-next 18/19] mlxsw: reg: Add QoS Policer Configuration Register Jiri Pirko
2016-11-25 9:33 ` [patch net-next 19/19] mlxsw: spectrum: Add policers for trap groups Jiri Pirko
2016-11-26 2:22 ` [patch net-next 00/19] mlxsw: traps, trap groups and policers David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480066427-3961-1-git-send-email-jiri@resnulli.us \
--to=jiri@resnulli.us \
--cc=arkadis@mellanox.com \
--cc=davem@davemloft.net \
--cc=eladr@mellanox.com \
--cc=idosch@mellanox.com \
--cc=netdev@vger.kernel.org \
--cc=nogahf@mellanox.com \
--cc=ogerlitz@mellanox.com \
--cc=yotamg@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).