From: Philippe Reynes <tremyfr@gmail.com>
To: rasesh.mody@cavium.com, sudarsana.kalluru@cavium.com,
Dept-GELinuxNICDev@cavium.com, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: brocade: bna: use new api ethtool_{get|set}_link_ksettings
Date: Mon, 28 Nov 2016 23:52:19 +0100 [thread overview]
Message-ID: <1480373539-3257-1-git-send-email-tremyfr@gmail.com> (raw)
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/brocade/bna/bnad_ethtool.c | 54 +++++++++++++----------
1 files changed, 30 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
index 31f61a7..2865939 100644
--- a/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
+++ b/drivers/net/ethernet/brocade/bna/bnad_ethtool.c
@@ -240,40 +240,46 @@
#define BNAD_ETHTOOL_STATS_NUM ARRAY_SIZE(bnad_net_stats_strings)
static int
-bnad_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+bnad_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
- cmd->supported = SUPPORTED_10000baseT_Full;
- cmd->advertising = ADVERTISED_10000baseT_Full;
- cmd->autoneg = AUTONEG_DISABLE;
- cmd->supported |= SUPPORTED_FIBRE;
- cmd->advertising |= ADVERTISED_FIBRE;
- cmd->port = PORT_FIBRE;
- cmd->phy_address = 0;
+ u32 supported, advertising;
+
+ supported = SUPPORTED_10000baseT_Full;
+ advertising = ADVERTISED_10000baseT_Full;
+ cmd->base.autoneg = AUTONEG_DISABLE;
+ supported |= SUPPORTED_FIBRE;
+ advertising |= ADVERTISED_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+ cmd->base.phy_address = 0;
if (netif_carrier_ok(netdev)) {
- ethtool_cmd_speed_set(cmd, SPEED_10000);
- cmd->duplex = DUPLEX_FULL;
+ cmd->base.speed = SPEED_10000;
+ cmd->base.duplex = DUPLEX_FULL;
} else {
- ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
- cmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
- cmd->transceiver = XCVR_EXTERNAL;
- cmd->maxtxpkt = 0;
- cmd->maxrxpkt = 0;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
return 0;
}
static int
-bnad_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+bnad_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
/* 10G full duplex setting supported only */
- if (cmd->autoneg == AUTONEG_ENABLE)
- return -EOPNOTSUPP; else {
- if ((ethtool_cmd_speed(cmd) == SPEED_10000)
- && (cmd->duplex == DUPLEX_FULL))
- return 0;
- }
+ if (cmd->base.autoneg == AUTONEG_ENABLE)
+ return -EOPNOTSUPP;
+
+ if ((cmd->base.speed == SPEED_10000) &&
+ (cmd->base.duplex == DUPLEX_FULL))
+ return 0;
return -EOPNOTSUPP;
}
@@ -1118,8 +1124,6 @@
}
static const struct ethtool_ops bnad_ethtool_ops = {
- .get_settings = bnad_get_settings,
- .set_settings = bnad_set_settings,
.get_drvinfo = bnad_get_drvinfo,
.get_wol = bnad_get_wol,
.get_link = ethtool_op_get_link,
@@ -1137,6 +1141,8 @@
.set_eeprom = bnad_set_eeprom,
.flash_device = bnad_flash_device,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_link_ksettings = bnad_get_link_ksettings,
+ .set_link_ksettings = bnad_set_link_ksettings,
};
void
--
1.7.4.4
next reply other threads:[~2016-11-28 22:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-28 22:52 Philippe Reynes [this message]
2016-11-29 7:37 ` [PATCH] net: brocade: bna: use new api ethtool_{get|set}_link_ksettings Mody, Rasesh
2016-11-30 15:29 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480373539-3257-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=Dept-GELinuxNICDev@cavium.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rasesh.mody@cavium.com \
--cc=sudarsana.kalluru@cavium.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).