From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
To: "David S. Miller" <davem@davemloft.net>,
Fugang Duan <fugang.duan@nxp.com>,
Troy Kisky <troy.kisky@boundarydevices.com>,
Andrew Lunn <andrew@lunn.ch>, Eric Nelson <eric@nelint.com>,
Philippe Reynes <tremyfr@gmail.com>,
Johannes Berg <johannes@sipsolutions.net>,
netdev@vger.kernel.org
Cc: Chris Healy <cphealy@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
linux-kernel@vger.kernel.org,
Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Subject: [patch net v2] net: fec: cache statistics while device is down
Date: Tue, 29 Nov 2016 09:44:51 +0300 [thread overview]
Message-ID: <1480401891-19333-1-git-send-email-nikita.yoush@cogentembedded.com> (raw)
Execution 'ethtool -S' on fec device that is down causes OOPS on Vybrid
board:
Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0898200
pgd = ddecc000
[e0898200] *pgd=9e406811, *pte=400d1653, *ppte=400d1453
Internal error: : 1008 [#1] SMP ARM
...
Reason of OOPS is that fec_enet_get_ethtool_stats() accesses fec
registers while IPG clock is stopped by PM.
Fix that by caching statistics in fec_enet_private. Cache is initialized
at device probe time, and updated at statistics request time if device
is up, and also just before turning device off on down path.
Additional locking is not needed, since cached statistics is accessed
either before device is registered, or under rtnl_lock().
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
---
Changes since v1:
- initialize cache at device probe time
drivers/net/ethernet/freescale/fec.h | 2 ++
drivers/net/ethernet/freescale/fec_main.c | 23 +++++++++++++++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index c865135f3cb9..5ea740b4cf14 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -574,6 +574,8 @@ struct fec_enet_private {
unsigned int reload_period;
int pps_enable;
unsigned int next_counter;
+
+ u64 ethtool_stats[0];
};
void fec_ptp_init(struct platform_device *pdev);
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 5aa9d4ded214..6a20c24a2003 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -2313,14 +2313,24 @@ static const struct fec_stat {
{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
};
-static void fec_enet_get_ethtool_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data)
+static void fec_enet_update_ethtool_stats(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
int i;
for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
- data[i] = readl(fep->hwp + fec_stats[i].offset);
+ fep->ethtool_stats[i] = readl(fep->hwp + fec_stats[i].offset);
+}
+
+static void fec_enet_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct fec_enet_private *fep = netdev_priv(dev);
+
+ if (netif_running(dev))
+ fec_enet_update_ethtool_stats(dev);
+
+ memcpy(data, fep->ethtool_stats, ARRAY_SIZE(fec_stats) * sizeof(u64));
}
static void fec_enet_get_strings(struct net_device *netdev,
@@ -2874,6 +2884,8 @@ fec_enet_close(struct net_device *ndev)
if (fep->quirks & FEC_QUIRK_ERR006687)
imx6q_cpuidle_fec_irqs_unused();
+ fec_enet_update_ethtool_stats(ndev);
+
fec_enet_clk_enable(ndev, false);
pinctrl_pm_select_sleep_state(&fep->pdev->dev);
pm_runtime_mark_last_busy(&fep->pdev->dev);
@@ -3180,6 +3192,8 @@ static int fec_enet_init(struct net_device *ndev)
fec_restart(ndev);
+ fec_enet_update_ethtool_stats(ndev);
+
return 0;
}
@@ -3278,7 +3292,8 @@ fec_probe(struct platform_device *pdev)
fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
/* Init network device */
- ndev = alloc_etherdev_mqs(sizeof(struct fec_enet_private),
+ ndev = alloc_etherdev_mqs(sizeof(struct fec_enet_private) +
+ ARRAY_SIZE(fec_stats) * sizeof(u64),
num_tx_qs, num_rx_qs);
if (!ndev)
return -ENOMEM;
--
2.1.4
next reply other threads:[~2016-11-29 6:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-29 6:44 Nikita Yushchenko [this message]
2016-11-30 17:44 ` [patch net v2] net: fec: cache statistics while device is down David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480401891-19333-1-git-send-email-nikita.yoush@cogentembedded.com \
--to=nikita.yoush@cogentembedded.com \
--cc=andrew@lunn.ch \
--cc=cphealy@gmail.com \
--cc=davem@davemloft.net \
--cc=eric@nelint.com \
--cc=fabio.estevam@nxp.com \
--cc=fugang.duan@nxp.com \
--cc=johannes@sipsolutions.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=tremyfr@gmail.com \
--cc=troy.kisky@boundarydevices.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).