netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@axis.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>
Cc: Niklas Cassel <niklass@axis.com>, <netdev@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH 1/6] net: stmmac: return error if no DMA configuration is found
Date: Fri, 2 Dec 2016 15:11:45 +0100	[thread overview]
Message-ID: <1480687910-9690-1-git-send-email-niklass@axis.com> (raw)

From: Niklas Cassel <niklas.cassel@axis.com>

All drivers except pci glue layer calls stmmac_probe_config_dt.
stmmac_probe_config_dt does a kzalloc dma_cfg.

pci glue layer does kzalloc dma_cfg explicitly, so all current
drivers does a kzalloc dma_cfg.

Return an error if no DMA configuration is found, that way
we can assume that the DMA configuration always exists.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 1f9ec02fa7f8..04f88df7da49 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1577,16 +1577,12 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
  */
 static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 {
-	int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
-	int mixed_burst = 0;
 	int atds = 0;
 	int ret = 0;
 
-	if (priv->plat->dma_cfg) {
-		pbl = priv->plat->dma_cfg->pbl;
-		fixed_burst = priv->plat->dma_cfg->fixed_burst;
-		mixed_burst = priv->plat->dma_cfg->mixed_burst;
-		aal = priv->plat->dma_cfg->aal;
+	if (!priv->plat->dma_cfg) {
+		dev_err(priv->device, "DMA configuration not found\n");
+		return -EINVAL;
 	}
 
 	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
@@ -1598,8 +1594,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 		return ret;
 	}
 
-	priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
-			    aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
+	priv->hw->dma->init(priv->ioaddr,
+			    priv->plat->dma_cfg->pbl,
+			    priv->plat->dma_cfg->fixed_burst,
+			    priv->plat->dma_cfg->mixed_burst,
+			    priv->plat->dma_cfg->aal,
+			    priv->dma_tx_phy, priv->dma_rx_phy, atds);
 
 	if (priv->synopsys_id >= DWMAC_CORE_4_00) {
 		priv->rx_tail_addr = priv->dma_rx_phy +
-- 
2.1.4

             reply	other threads:[~2016-12-02 14:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-02 14:11 Niklas Cassel [this message]
2016-12-02 14:11 ` [PATCH 2/6] net: stmmac: simplify the common DMA init API Niklas Cassel
2016-12-02 14:11 ` [PATCH 3/6] net: stmmac: stmmac_platform: fix parsing of DT binding Niklas Cassel
2016-12-02 14:11 ` [PATCH 4/6] net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK Niklas Cassel
2016-12-02 14:11 ` [PATCH 5/6] net: stmmac: add support for independent DMA pbl for tx/rx Niklas Cassel
2016-12-03 21:10 ` [PATCH 1/6] net: stmmac: return error if no DMA configuration is found David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1480687910-9690-1-git-send-email-niklass@axis.com \
    --to=niklas.cassel@axis.com \
    --cc=alexandre.torgue@st.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=niklass@axis.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).