From: Niklas Cassel <niklas.cassel@axis.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Cc: Niklas Cassel <niklass@axis.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 3/6] net: stmmac: stmmac_platform: fix parsing of DT binding
Date: Wed, 7 Dec 2016 15:20:05 +0100 [thread overview]
Message-ID: <1481120409-18103-4-git-send-email-niklass@axis.com> (raw)
In-Reply-To: <1481120409-18103-1-git-send-email-niklass@axis.com>
From: Niklas Cassel <niklas.cassel@axis.com>
commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with DT")
changed the parsing of the DT binding.
Before 64c3b252e9fc, snps,fixed-burst and snps,mixed-burst were parsed
regardless if the property snps,pbl existed or not.
After the commit, fixed burst and mixed burst are only parsed if
snps,pbl exists. Now when snps,aal has been added, it too is only
parsed if snps,pbl exists.
Since the DT binding does not specify that fixed burst, mixed burst
or aal depend on snps,pbl being specified, undo changes introduced
by 64c3b252e9fc.
The issue commit 64c3b252e9fc ("net: stmmac: fixed the pbl setting with
DT") tries to address is solved in another way:
The databook specifies that all values other than
1, 2, 4, 8, 16, or 32 results in undefined behavior,
so snps,pbl = <0> is invalid.
If pbl is 0 after parsing, set pbl to DEFAULT_DMA_PBL.
This handles the case where the property is omitted, and also handles
the case where the property is specified without any data.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +--
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 29 +++++++++++-----------
2 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b1e42ddf0370..b5188122bc15 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1581,8 +1581,8 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
int atds = 0;
int ret = 0;
- if (!priv->plat->dma_cfg) {
- dev_err(priv->device, "DMA configuration not found\n");
+ if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
+ dev_err(priv->device, "Invalid DMA configuration\n");
return -EINVAL;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index d3b6f92f350a..81800f23a9c4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -304,21 +304,22 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
plat->force_sf_dma_mode = 1;
}
- if (of_find_property(np, "snps,pbl", NULL)) {
- dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
- GFP_KERNEL);
- if (!dma_cfg) {
- stmmac_remove_config_dt(pdev, plat);
- return ERR_PTR(-ENOMEM);
- }
- plat->dma_cfg = dma_cfg;
- of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
- dma_cfg->aal = of_property_read_bool(np, "snps,aal");
- dma_cfg->fixed_burst =
- of_property_read_bool(np, "snps,fixed-burst");
- dma_cfg->mixed_burst =
- of_property_read_bool(np, "snps,mixed-burst");
+ dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*dma_cfg),
+ GFP_KERNEL);
+ if (!dma_cfg) {
+ stmmac_remove_config_dt(pdev, plat);
+ return ERR_PTR(-ENOMEM);
}
+ plat->dma_cfg = dma_cfg;
+
+ of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
+ if (!dma_cfg->pbl)
+ dma_cfg->pbl = DEFAULT_DMA_PBL;
+
+ dma_cfg->aal = of_property_read_bool(np, "snps,aal");
+ dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
+ dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
+
plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
if (plat->force_thresh_dma_mode) {
plat->force_sf_dma_mode = 0;
--
2.1.4
next prev parent reply other threads:[~2016-12-07 14:20 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-07 14:20 [PATCH v3 0/6] net: stmmac: make DMA programmable burst length more configurable Niklas Cassel
2016-12-07 14:20 ` [PATCH v3 1/6] net: stmmac: return error if no DMA configuration is found Niklas Cassel
2016-12-08 10:44 ` Alexandre Torgue
2016-12-08 15:19 ` David Miller
2016-12-08 15:41 ` Alexandre Torgue
2016-12-07 14:20 ` [PATCH v3 2/6] net: stmmac: simplify the common DMA init API Niklas Cassel
2016-12-08 8:50 ` Alexandre Torgue
2016-12-07 14:20 ` Niklas Cassel [this message]
2016-12-08 9:02 ` [PATCH v3 3/6] net: stmmac: stmmac_platform: fix parsing of DT binding Alexandre Torgue
2016-12-08 9:46 ` Niklas Cassel
2016-12-08 9:54 ` Alexandre Torgue
2016-12-07 14:20 ` [PATCH v3 4/6] net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASK Niklas Cassel
2016-12-08 9:12 ` Alexandre Torgue
2016-12-07 14:20 ` [PATCH v3 5/6] net: stmmac: add support for independent DMA pbl for tx/rx Niklas Cassel
2016-12-08 10:30 ` Alexandre Torgue
2016-12-07 14:20 ` [PATCH v3 6/6] net: smmac: allow configuring lower pbl values Niklas Cassel
2016-12-08 10:42 ` Alexandre Torgue
2016-12-08 13:44 ` Andreas Färber
2016-12-08 15:18 ` David Miller
2016-12-08 18:07 ` [PATCH v3 0/6] net: stmmac: make DMA programmable burst length more configurable David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481120409-18103-4-git-send-email-niklass@axis.com \
--to=niklas.cassel@axis.com \
--cc=alexandre.torgue@st.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=niklass@axis.com \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).