From: David Ahern <dsa@cumulusnetworks.com>
To: netdev@vger.kernel.org, stephen@networkplumber.org
Cc: David Ahern <dsa@cumulusnetworks.com>
Subject: [iproute2 net-next 3/8] bpf: Add BPF_ macros
Date: Sun, 11 Dec 2016 16:53:10 -0800 [thread overview]
Message-ID: <1481503995-24825-4-git-send-email-dsa@cumulusnetworks.com> (raw)
In-Reply-To: <1481503995-24825-1-git-send-email-dsa@cumulusnetworks.com>
Based on version in kernel repo, samples/bpf/libbpf.h
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
---
include/bpf_util.h | 179 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 179 insertions(+)
diff --git a/include/bpf_util.h b/include/bpf_util.h
index 726e34777755..5361dab1933d 100644
--- a/include/bpf_util.h
+++ b/include/bpf_util.h
@@ -65,6 +65,185 @@ struct bpf_cfg_in {
struct sock_filter *ops;
};
+/* ALU ops on registers, bpf_add|sub|...: dst_reg += src_reg */
+
+#define BPF_ALU64_REG(OP, DST, SRC) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU64 | BPF_OP(OP) | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = 0 })
+
+#define BPF_ALU32_REG(OP, DST, SRC) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU | BPF_OP(OP) | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = 0 })
+
+/* ALU ops on immediates, bpf_add|sub|...: dst_reg += imm32 */
+
+#define BPF_ALU64_IMM(OP, DST, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU64 | BPF_OP(OP) | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
+#define BPF_ALU32_IMM(OP, DST, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU | BPF_OP(OP) | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
+/* Short form of mov, dst_reg = src_reg */
+
+#define BPF_MOV64_REG(DST, SRC) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU64 | BPF_MOV | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = 0 })
+
+#define BPF_MOV32_REG(DST, SRC) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU | BPF_MOV | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = 0 })
+
+/* Short form of mov, dst_reg = imm32 */
+
+#define BPF_MOV64_IMM(DST, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU64 | BPF_MOV | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
+#define BPF_MOV32_IMM(DST, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_ALU | BPF_MOV | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
+/* BPF_LD_IMM64 macro encodes single 'load 64-bit immediate' insn */
+#define BPF_LD_IMM64(DST, IMM) \
+ BPF_LD_IMM64_RAW(DST, 0, IMM)
+
+#define BPF_LD_IMM64_RAW(DST, SRC, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_LD | BPF_DW | BPF_IMM, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = 0, \
+ .imm = (__u32) (IMM) }), \
+ ((struct bpf_insn) { \
+ .code = 0, /* zero is reserved opcode */ \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = ((__u64) (IMM)) >> 32 })
+
+#ifndef BPF_PSEUDO_MAP_FD
+# define BPF_PSEUDO_MAP_FD 1
+#endif
+
+/* pseudo BPF_LD_IMM64 insn used to refer to process-local map_fd */
+#define BPF_LD_MAP_FD(DST, MAP_FD) \
+ BPF_LD_IMM64_RAW(DST, BPF_PSEUDO_MAP_FD, MAP_FD)
+
+
+/* Direct packet access, R0 = *(uint *) (skb->data + imm32) */
+
+#define BPF_LD_ABS(SIZE, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_LD | BPF_SIZE(SIZE) | BPF_ABS, \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = IMM })
+
+/* Memory load, dst_reg = *(uint *) (src_reg + off16) */
+
+#define BPF_LDX_MEM(SIZE, DST, SRC, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_LDX | BPF_SIZE(SIZE) | BPF_MEM, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = OFF, \
+ .imm = 0 })
+
+/* Memory store, *(uint *) (dst_reg + off16) = src_reg */
+
+#define BPF_STX_MEM(SIZE, DST, SRC, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_STX | BPF_SIZE(SIZE) | BPF_MEM, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = OFF, \
+ .imm = 0 })
+
+/* Memory store, *(uint *) (dst_reg + off16) = imm32 */
+
+#define BPF_ST_MEM(SIZE, DST, OFF, IMM) \
+ ((struct bpf_insn) { \
+ .code = BPF_ST | BPF_SIZE(SIZE) | BPF_MEM, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = OFF, \
+ .imm = IMM })
+
+/* Conditional jumps against registers, if (dst_reg 'op' src_reg) goto pc + off16 */
+
+#define BPF_JMP_REG(OP, DST, SRC, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP | BPF_OP(OP) | BPF_X, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = OFF, \
+ .imm = 0 })
+
+/* Conditional jumps against immediates, if (dst_reg 'op' imm32) goto pc + off16 */
+
+#define BPF_JMP_IMM(OP, DST, IMM, OFF) \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP | BPF_OP(OP) | BPF_K, \
+ .dst_reg = DST, \
+ .src_reg = 0, \
+ .off = OFF, \
+ .imm = IMM })
+
+/* Raw code statement block */
+
+#define BPF_RAW_INSN(CODE, DST, SRC, OFF, IMM) \
+ ((struct bpf_insn) { \
+ .code = CODE, \
+ .dst_reg = DST, \
+ .src_reg = SRC, \
+ .off = OFF, \
+ .imm = IMM })
+
+/* Program exit */
+
+#define BPF_EXIT_INSN() \
+ ((struct bpf_insn) { \
+ .code = BPF_JMP | BPF_EXIT, \
+ .dst_reg = 0, \
+ .src_reg = 0, \
+ .off = 0, \
+ .imm = 0 })
+
int bpf_parse_common(enum bpf_prog_type type, struct bpf_cfg_in *cfg,
const struct bpf_cfg_ops *ops, void *nl);
--
2.1.4
next prev parent reply other threads:[~2016-12-12 0:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-12 0:53 [iproute2 v3 net-next 0/8] Add support for vrf helper David Ahern
2016-12-12 0:53 ` [iproute2 net-next 1/8] lib bpf: Add support for BPF_PROG_ATTACH and BPF_PROG_DETACH David Ahern
2016-12-12 9:14 ` Daniel Borkmann
2016-12-12 0:53 ` [iproute2 net-next 2/8] bpf: export bpf_prog_load David Ahern
2016-12-12 9:14 ` Daniel Borkmann
2016-12-12 0:53 ` David Ahern [this message]
2016-12-12 9:15 ` [iproute2 net-next 3/8] bpf: Add BPF_ macros Daniel Borkmann
2016-12-12 11:28 ` Hannes Frederic Sowa
2016-12-12 11:48 ` Daniel Borkmann
2016-12-12 0:53 ` [iproute2 net-next 4/8] move cmd_exec to lib utils David Ahern
2016-12-12 0:53 ` [iproute2 net-next 5/8] Add filesystem APIs to lib David Ahern
2016-12-12 0:53 ` [iproute2 net-next 6/8] change name_is_vrf to return index David Ahern
2016-12-12 0:53 ` [iproute2 net-next 7/8] libnetlink: Add variant of rtnl_talk that does not display RTNETLINK answers error David Ahern
2016-12-12 0:53 ` [iproute2 net-next 8/8] Introduce ip vrf command David Ahern
2016-12-13 18:44 ` [iproute2 v3 net-next 0/8] Add support for vrf helper Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481503995-24825-4-git-send-email-dsa@cumulusnetworks.com \
--to=dsa@cumulusnetworks.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).