From: Philippe Reynes <tremyfr@gmail.com>
To: mlindner@marvell.com, stephen@networkplumber.org, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: marvell: skge: use new api ethtool_{get|set}_link_ksettings
Date: Sat, 14 Jan 2017 13:08:28 +0100 [thread overview]
Message-ID: <1484395708-4107-1-git-send-email-tremyfr@gmail.com> (raw)
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
The callback set_link_ksettings no longer update the value
of advertising, as the struct ethtool_link_ksettings is
defined as const.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
drivers/net/ethernet/marvell/skge.c | 63 ++++++++++++++++++++--------------
1 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 9146a51..81106b7 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -300,65 +300,76 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
return supported;
}
-static int skge_get_settings(struct net_device *dev,
- struct ethtool_cmd *ecmd)
+static int skge_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
+ u32 supported, advertising;
- ecmd->transceiver = XCVR_INTERNAL;
- ecmd->supported = skge_supported_modes(hw);
+ supported = skge_supported_modes(hw);
if (hw->copper) {
- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy_addr;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = hw->phy_addr;
} else
- ecmd->port = PORT_FIBRE;
+ cmd->base.port = PORT_FIBRE;
+
+ advertising = skge->advertising;
+ cmd->base.autoneg = skge->autoneg;
+ cmd->base.speed = skge->speed;
+ cmd->base.duplex = skge->duplex;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
- ecmd->advertising = skge->advertising;
- ecmd->autoneg = skge->autoneg;
- ethtool_cmd_speed_set(ecmd, skge->speed);
- ecmd->duplex = skge->duplex;
return 0;
}
-static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int skge_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct skge_port *skge = netdev_priv(dev);
const struct skge_hw *hw = skge->hw;
u32 supported = skge_supported_modes(hw);
int err = 0;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- ecmd->advertising = supported;
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ advertising = supported;
skge->duplex = -1;
skge->speed = -1;
} else {
u32 setting;
- u32 speed = ethtool_cmd_speed(ecmd);
+ u32 speed = cmd->base.speed;
switch (speed) {
case SPEED_1000:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_1000baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_1000baseT_Half;
else
return -EINVAL;
break;
case SPEED_100:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_100baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_100baseT_Half;
else
return -EINVAL;
break;
case SPEED_10:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_10baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_10baseT_Half;
else
return -EINVAL;
@@ -371,11 +382,11 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
return -EINVAL;
skge->speed = speed;
- skge->duplex = ecmd->duplex;
+ skge->duplex = cmd->base.duplex;
}
- skge->autoneg = ecmd->autoneg;
- skge->advertising = ecmd->advertising;
+ skge->autoneg = cmd->base.autoneg;
+ skge->advertising = advertising;
if (netif_running(dev)) {
skge_down(dev);
@@ -875,8 +886,6 @@ static int skge_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
}
static const struct ethtool_ops skge_ethtool_ops = {
- .get_settings = skge_get_settings,
- .set_settings = skge_set_settings,
.get_drvinfo = skge_get_drvinfo,
.get_regs_len = skge_get_regs_len,
.get_regs = skge_get_regs,
@@ -899,6 +908,8 @@ static int skge_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
.set_phys_id = skge_set_phys_id,
.get_sset_count = skge_get_sset_count,
.get_ethtool_stats = skge_get_ethtool_stats,
+ .get_link_ksettings = skge_get_link_ksettings,
+ .set_link_ksettings = skge_set_link_ksettings,
};
/*
--
1.7.4.4
next reply other threads:[~2017-01-14 12:08 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-14 12:08 Philippe Reynes [this message]
2017-01-16 17:29 ` [PATCH] net: marvell: skge: use new api ethtool_{get|set}_link_ksettings Stephen Hemminger
2017-01-16 17:36 ` David Miller
2017-01-16 17:50 ` Stephen Hemminger
2017-01-16 21:27 ` Philippe Reynes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1484395708-4107-1-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mlindner@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).